Table of Contents Author Guidelines Submit a Manuscript
Complexity
Volume 2018, Article ID 8740989, 14 pages
https://doi.org/10.1155/2018/8740989
Research Article

Fault Diagnosis for Hydraulic Servo System Using Compressed Random Subspace Based ReliefF

1School of Reliability and Systems Engineering, Beihang University, Beijing, China
2Science & Technology on Reliability and Environmental Engineering Laboratory, Beijing, China
3Research and Development Center, China Academy of Launch Vehicle Technology, Beijing, China

Correspondence should be addressed to Wen-jin Zhang; ten.haey@kojwzaaub

Received 28 October 2017; Revised 5 January 2018; Accepted 14 January 2018; Published 18 February 2018

Academic Editor: Gangbing Song

Copyright © 2018 Yu Ding et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. Lu, H. Yuan, L. Tao, and H. Liu, “Performance assessment of hydraulic servo system based on bi-step neural network and autoregressive model,” Journal of Vibroengineering, vol. 15, no. 3, pp. 1546–1559, 2013. View at Google Scholar · View at Scopus
  2. X. He, “Fault diagnosis approach of hydraulic system using FARX model,” in Proceedings of the 2011 International Conference on Advanced in Control Engineering and Information Science, CEIS 2011, pp. 949–953, China, August 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. H. Liu, X. Wang, and C. Lu, “Rolling bearing fault diagnosis under variable conditions using Hilbert-Huang transform and singular value decomposition,” Mathematical Problems in Engineering, vol. 2014, Article ID 765621, 10 pages, 2014. View at Publisher · View at Google Scholar
  4. Z. Wang, C. Lu, Z. Wang, and J. Ma, “Health assessment of rotary machinery based on integrated feature selection and Gaussian mixed model,” Journal of Vibroengineering, vol. 16, no. 4, pp. 1753–1762, 2014. View at Google Scholar · View at Scopus
  5. S.-Q. Ren, Y.-W. Fu, X. Li, and Z.-W. Zhuang, “Feature selection based on classes margin,” Journal of Software, vol. 19, no. 4, pp. 842–850, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Van and H.-J. Kang, “Two-stage feature selection for bearing fault diagnosis based on dual-tree complex wavelet transform and empirical mode decomposition,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 230, no. 2, pp. 291–302, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. T. W. Rauber, F. de Assis Boldt, and F. M. Varejão, “Heterogeneous feature models and feature selection applied to bearing fault diagnosis,” IEEE Transactions on Industrial Electronics, vol. 62, no. 1, pp. 637–646, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Cerrada, R. V. Sánchez, D. Cabrera, G. Zurita, and C. Li, “Multi-stage feature selection by using genetic algorithms for fault diagnosis in gearboxes based on vibration signal,” Sensors, vol. 15, no. 9, pp. 23903–23926, 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. K. H. Hui, C. S. Ooi, M. H. Lim, M. S. Leong, and S. M. Al-Obaidi, “An improved wrapper-based feature selection method for machinery fault diagnosis,” PloS one, vol. 12, no. 12, 2017. View at Google Scholar
  10. J. Lin and L. Qu, “Feature extraction based on morlet wavelet and its application for mechanical fault diagnosis,” Journal of Sound and Vibration, vol. 234, no. 1, pp. 135–148, 2000. View at Publisher · View at Google Scholar · View at Scopus
  11. I. K. Fodor, A survey of dimension reduction techniques. Neoplasia 7.5 (2002): 475-485. View at Publisher · View at Google Scholar
  12. H. Peng, X. Chen, and W. Xu, “Application of PCA feature extraction and SVM multi-classification on sensor fault diagnosis,” Journal of Data Acquisition and Processing, vol. 25, no. 1, pp. 111–116, 2010. View at Google Scholar · View at Scopus
  13. Z.-B. Zhu and Z.-H. Song, “A novel fault diagnosis system using pattern classification on kernel FDA subspace,” Expert Systems with Applications, vol. 38, no. 6, pp. 6895–6905, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. D. E. Goldberg, Genetic Algorithm in Search, Optimization, and Machine Learning, vol. xiii.7, 1989.
  15. I. Iguyon and A. Elisseeff, “An introduction to variable and feature selection,” Journal of Machine Learning Research, vol. 3, pp. 1157–1182, 2003. View at Google Scholar · View at Scopus
  16. N. Spolaôr, E. A. Cherman, M. C. Monard, and H. D. Lee, “ReliefF for multi-label feature selection,” in Proceedings of the 2nd Brazilian Conference on Intelligent Systems, BRACIS 2013, pp. 6–11, Brazil, October 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. Huang, P. J. McCullagh, and N. D. Black, “An optimization of ReliefF for classification in large datasets,” Data & Knowledge Engineering, vol. 68, no. 11, pp. 1348–1356, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. I. Kononenko, M. Robnik, and S. U. Pompe, “ReliefF for estimation and discretization of attributes in classification, regression, and ILP problems,” Artificial Intelligence: Methodology, Systems, Applications, 1996. View at Google Scholar
  19. L.-X. Zhang, J.-X. Wang, Y.-N. Zhao, and Z.-H. Yang, “A novel hybrid feature selection algorithm: using ReliefF estimation for GA-Wrapper search,” in Proceedings of the International Conference on Machine Learning and Cybernetics, vol. 1, pp. 380–384, IEEE, Xi'an, China, November 2003. View at Scopus
  20. F. Yang, W. Cheng, R. Dou, and N. Zhou, “An improved feature selection approach based on ReliefF and Mutual Information,” in Proceedings of the 2011 International Conference on Information Science and Technology, ICIST 2011, pp. 246–250, China, March 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. T. K. Ho, “The random subspace method for constructing decision forests,” IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 20, no. 8, pp. 832–844, 1998. View at Publisher · View at Google Scholar · View at Scopus
  22. T. K. Ho, “Nearest neighbors in random subspaces,” in Advances in pattern recognition (Sydney, 1998), vol. 1451 of Lecture Notes in Comput. Sci., pp. 640–648, Springer, Berlin, 1998. View at Publisher · View at Google Scholar · View at MathSciNet
  23. R. Duangsoithong and T. Windeatt, “Relevance and Redundancy Analysis for Ensemble Classifiers,” in Machine Learning and Data Mining in Pattern Recognition, vol. 5632 of Lecture Notes in Computer Science, pp. 206–220, Springer, Berlin, Germany, 2009. View at Publisher · View at Google Scholar
  24. I. Kononenko, “Analysis and extension of RELIEF,” in Proceedings of the The European Conference on Machine Learning and Principles and Practice of Knowledge Discovery in Databases, 1994.
  25. Y. Sun, “Iterative RELIEF for feature weighting: algorithms, theories, and applications,” IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 29, no. 6, pp. 1035–1051, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. N. Karayiannis, “MECA: maximum entropy clustering algorithm,” in Proceedings of the 1994 IEEE 3rd International Fuzzy Systems Conference, pp. 630–635, Orlando, FL, USA. View at Publisher · View at Google Scholar
  27. D.-M. Zhao, J.-H. Wang, W. U. Jing, and J.-F. Ma, “Using fuzzy logic and entropy theory to risk assessment of the information security,” in Proceedings of the International Conference on Machine Learning and Cybernetics (ICMLC '05), vol. 4, pp. 2448–2453, IEEE, Guangzhou, China, August 2005. View at Publisher · View at Google Scholar · View at Scopus
  28. R.-P. Li and M. Mukaidono, “Maximum-entropy approach to fuzzy clustering,” in Proceedings of the IEEE International Conference on Fuzzy Systems, 1995. International Joint Conference of the Fourth IEEE International Conference on Fuzzy Systems and the Second International Fuzzy Engineering Symposium IEEE Xplore, vol. 4, pp. 2227–2232, March 1995. View at Scopus
  29. W. Xizhao and S. An, “Research on learning weights of fuzzy production rules based on maximum fuzzy entropy,” Journal of Computer Research Development, vol. 43, no. 4, pp. 673–678, 2006. View at Google Scholar
  30. P. Langley, “Selection of Relevant Features in Machine Learning,” in Proceedings of the Aaai Fall Symposium on Relevance, 144, p. 140, 1994. View at Publisher · View at Google Scholar
  31. H. Peng, F. Long, and C. Ding, “Feature selection based on mutual information: criteria of max-dependency, max-relevance, and min-redundancy,” IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 27, no. 8, pp. 1226–1238, 2005. View at Publisher · View at Google Scholar · View at Scopus
  32. K. Kira and L. A. Rendell, “Feature selection problem: traditional methods and a new algorithm,” in Proceedings of the Proceedings Tenth National Conference on Artificial Intelligence - AAAI-92, pp. 129–134, July 1992. View at Scopus
  33. H. Liu, J. Li, and L. Wong, “A comparative study on feature selection and classification methods using gene expression profiles and proteomic patterns,” Genome Informatics, vol. 13, pp. 51–60, 2002. View at Google Scholar · View at Scopus
  34. T. Li, C. Zhang, and M. Ogihara, “A comparative study of feature selection and multiclass classfication methods for tissue classification based on gene expression,” Bioinformatics, vol. 20, no. 15, pp. 2429–2437, 2004. View at Publisher · View at Google Scholar · View at Scopus
  35. M. H. Nguyen and F. De la Torre, “Optimal feature selection for support vector machines,” Pattern Recognition, vol. 43, no. 3, pp. 584–591, 2010. View at Publisher · View at Google Scholar · View at Scopus
  36. L. Jiang and J. J. Zhang, “Dynamic Characteristics Simulation of Hydraulic Position Servo-system Based on AMESim,” Mechanical Engineering Automation, 2007. View at Google Scholar
  37. L. Wan X, B. Ding H, and Z. Zhou, “Study on dynamical simulation of hydraulic servo system based on AMESim and simulink,” Coal Mine Machinery, 2007. View at Google Scholar
  38. J. Cheng, W. Liu, and Z. Zhang, “Modeling and simulation for the electro-hydraulic servo system based on Simulink,” in Proceedings of the 2011 International Conference on Consumer Electronics, Communications and Networks, CECNet 2011, pp. 466–469, China, April 2011. View at Publisher · View at Google Scholar · View at Scopus