Research Article
FDM Rapid Prototyping Technology of Complex-Shaped Mould Based on Big Data Management of Cloud Manufacturing
Table 8
Comparison of two processing methods for manufacturing spur face gear master mould.
| Processing mode | Processing cycle (days) | Processing cost (dollars) | Forming quality | Machining accuracy (mm) | Machining roughness (μm) |
| Subtractive material manufacturing | 7–10 | 300 | 0.02–0.05 mm | <0.01 μm | Additive material manufacturing | 1-2 | 100 | 0.036 mm–0.181 mm | 0.007–0.01 μm |
|
|