Research Article
Multiobjective Optimization of Tool Geometric Parameters Using Genetic Algorithm
Figure 3
Chip shapes at different clearance angles (γo = 10o, rε = 0.07 mm).
| (a) αo = 2° |
| (b) αo = 4° |
| (c) αo = 6° |
| (d) αo = 8° |
| (e) αo = 10° |
| (a) αo = 2° |
| (b) αo = 4° |
| (c) αo = 6° |
| (d) αo = 8° |
| (e) αo = 10° |