Identification and Prediction of Allo-Source Overpressure Caused by Vertical Transfer: Example from an HTHP Gas Reservoir in the Ledong Slope in the Yinggehai Basin

<div>Comparison of pore pressures from different data source. The measured pressure is from the DST and MDT, and MUD means the equivalent pressures calculated from mud weights.</div>

Geofluids

fig3

Figure 3

Figure 3: Identification and Prediction of Allo-Source Overpressure Caused by Vertical Transfer: Example from an HTHP Gas Reservoir in the Ledong Slope in the Yinggehai Basin 

Figure 3 | Identification and Prediction of Allo-Source Overpressure Caused by Vertical Transfer: Example from an HTHP Gas Reservoir in the Ledong Slope in the Yinggehai Basin 