Research Article
Well Pattern and Well Spacing Optimization of Large Volume Water Injection in a Low-Permeability Reservoir with Pressure Sensitivity
Table 2
Parameters used in the dilation-recompaction model.
| Parameters | Value | Unit |
| Compressibility coefficient () | | 1/kPa | Dilation compressibility coefficient () | | 1/kPa | Residual dilation fraction () | 0.1 | / | Recompaction pressure () | 30 | MPa | Maximum allowed proportional increase in porosity () | 1.3 | / | Dilation pressure () | 50 | MPa | Initial reservoir pressure () | 28 | MPa | Permeability multipliers (I/J/K) () | 50 | / |
|
|