Superheated steam flow during multipoint steam injection technology has a good effect on improving the steam absorption profile of heavy oil thermal recovery wells, enhancing the production degree of horizontal section of thermal recovery wells, and enhancing oil recovery. Based on the structure of multipoint steam injection horizontal string, considering the characteristics of variable mass flow, pressure drop of steam-liquid two-phase flow, and throttling pressure difference of steam injection valve in the process of steam injection, this paper establishes the calculation model of various parameters of multipoint steam injection horizontal wellbore and calculates the distribution of steam injection rate, temperature, pressure gradient, and dryness along the section of multipoint steam injection in horizontal wellbore. The results show that the temperature and pressure decrease gradually from heel to toe, and the steam dryness decreases gradually. Considering the influence of throttle pressure difference of steam injection valve and pressure drop of gas-liquid two-phase flow in the wellbore, the traditional calculation model of steam injection thermodynamic parameters is optimized, and the optimization of wellbore structure and steam injection parameters is an effective method to achieve uniform steam injection in horizontal wells. The steam injection uniformity of horizontal wells can be effectively improved by adjusting the steam injection valve spacing and steam injection parameters. When the steam injection volume is 200 m3/d and the steam injection valve spacing is 20 m, a more stable steam injection effect can be obtained. The findings of this study can help for better understanding of improving the uniformity of steam injection and enhancing the recovery factor.

Qiuying Du

Mingzhong Li

Chenwei Liu

Zhifeng Bai

Chenru Zhou

Xiangyu Wang

A Numerical Simulation Approach for Superheated Steam Flow during Multipoint Steam Injection in Horizontal Well

A laboratory model of a single pile embedded in Nanyang expansive soil and subjected to water infiltration is applied in this study to examine the interaction between the expansive soil and pile foundation upon water infiltration. The soil matric suction decreases as a result of the rising soil-water content. The amount of soil ground heave reaches its peak of 10.7 mm after 200 hours of water infiltration. As matric suction decreases, pile shaft friction also declines, which causes more of the load at the pile head to be carried by the pile base resulting in more pile settlements. A new numerical simulation method is provided to simulate this issue by coupling the subsurface flow, soil deformation, and hygroscopic swelling to investigate the expansive soil-pile response upon water infiltration. From the numerical simulation model, hygroscopic strain arises as a result of elevated moisture levels resulting from the entry of water, and due to ground heave and the mobilization of lateral soil swelling, the shear stress at the interface between the soil and the pile gradually increases over time. It reaches its maximum value of 4420 Pa at upper depths around 200 hours after the infiltration. The comparison between the lab model testing data and the numerical model results demonstrates a good level of concurrence.

Waleed Awadalseed

Xingli Zhang

Yunpeng Ji

XiangJin Wang

Yuntian Bai

Honghua Zhao

Experimental and Numerical Simulation Study of Water Infiltration Impact on Soil-Pile Interaction in Expansive Soil

To obtain the influence of anisotropy and energy evolution characteristics on wellbore stability, the acoustic and mechanical anisotropy characteristics of shales are studied through various experiments, including scanning electron microscopy, ultrasonic pulse transmission, and uniaxial compression experiments, with the Longmaxi Formation shale in the southern area of the Sichuan Basin as the research object. The energy evolution characteristics of the Longmaxi Formation shale under different bedding angles are analyzed. The influence of anisotropy on the wellbore stability of shale formation is discussed on this basis. The results show that the acoustic and mechanical parameters, failure mode, and energy evolution characteristics of shale have significant anisotropy. Furthermore, the P-wave and S-wave time differences decrease with an increase in bedding angle. The compressive strength and Poisson’s ratio decrease first and then increase with an increase in bedding angle. Meanwhile, the elastic modulus gradually increases with an increase in bedding angle. Rock samples with different bedding angles show diverse failure modes in mechanical tests, including splitting, shear, and shear-splitting failure. The total energy and elastic energy decrease first and then increase with an increase in bedding angle. Finally, the formation anisotropy affects the wellbore stability: the higher the formation anisotropy, the more vulnerable is the wellbore to instability.

Liu Xiangjun

Zhuang Dalin

Xiong Jian

Zhou Yishan

Liu Junjie

Deng Chong

Liang Lixi

Ding Yi

Jian Xuemei

Anisotropy and Energy Evolution Characteristics of Shales: A Case Study of the Longmaxi Formation in Southern Sichuan Basin, China

Developing automatic history matching (AHM) methods to replace the traditional manual history matching (MHM) approach in adjusting the permeability distribution of the reservoir simulation model has been studied by many authors. Because permeability values need to be evaluated at hundreds of thousands of grid cells in a typical reservoir simulation model, it is necessary to apply a reparameterization technique to allow the optimization algorithms to be implemented with fewer variables. In basic reparameterization techniques including zonation and pilot point methods, the calibrations are usually based solely on the production data with no systematic link to the geological and geophysical data, and therefore, the obtained permeability distribution may be not geologically consistent. Several other reparameterization techniques have attempted to preserve geological consistency by incorporating 4D seismic data; however, these techniques cannot be applied to our fractured basement reservoirs (FBRs) as they do not have 4D seismic data. Taking into account these challenges, in this study, an AHM methodology and workflow have been developed using a new reparameterization technique. This approach attempts to minimize the potential for geological nonconsistency of the calibrated results by linking the permeability to geophysical data. The proposed methodology can be applied to fields with only traditional geophysical data (3D seismic and conventional well logs). In the proposed workflow, the spatial distributions of seismic attributes and geomechanical properties were calculated and estimated from 3D seismic data and well logs, respectively. After that, a feed-forward artificial neural network (ANN) model trained by the back-propagation algorithm of the relationship between initial permeability with seismic attributes and geomechanical properties of their grid cell values is developed. Then, the calibration of the permeability distribution is performed by adjustment of the ANN model. Modification of the ANN model is performed using the simultaneous perturbation stochastic approximation (SPSA) algorithm to calibrate transmission coefficients in the ANN model to minimize the discrepancy between the simulated results and observed data. The developed methodology is applied to calibrate the permeability distribution of a simulation model of Bach Ho FBR in Vietnam. The effectiveness of the methodology is evident by comparing the historical matches with an available manually history-matched simulation model. The application shows that the proposed methodology could be considered as a suitable practical approach for adjusting the permeability distribution for FBR reservoir simulation models.

Le Ngoc Son

Nguyen The Duc

Sumihiko Murata

Phan Ngoc Trung

Automatic History Matching for Adjusting Permeability Field of Fractured Basement Reservoir Simulation Model Using Seismic, Well Log, and Production Data

The Niutitang Formation of the lower Cambrian (Є1n) is a target reservoir of shale gas widely developed in China’s Middle-Upper Yangtze region, with the characteristics of being widely distributed, having a big thickness and highly organic carbon abundance. However, the exploration and research degree are relatively low. Based on extensive core sample, experimental test results, drilling, and field outcrop surveying, the shale gas generation capacity, gas content, and gas composition are discussed. The preservation conditions of shale gas are then systematically analyzed from the aspects of tectonic movement, fault development, structural style, and thermal evolution degree. The results show that the organic-rich shale with a thickness ranging from 40 to 150 m developed in the mid-lower part of the Є1n Formation, with the TOC content values ranging from 0.4% to 14.64%. While it has unfavorable characteristics of a high thermal evolution, with Ro values ranging from 1.92% to 5.74%, a low gas content and a high nitrogen content (70% wells). The Є1n shale gas has complex preservation conditions. The Є1n Formation has good roof-to-floor conditions, but after the main gas generating peak of the Є1n shale during the Jurassic–Cretaceous, the most intensive tectonic activity of the Yanshan movement resulted in poor preservation conditions (faults developed and cap rock fractured). The huge faults extended to the surface are formed due to tectonic movement in an extensional environment, and the structural style and development are the main factors affecting the preservation conditions of the Є1n shale gas. Additionally, the high thermal evolution of the Є1n shales also has a certain impact on the preservation conditions. Therefore, the stable area far from large faults (>2.0 km), with weak local tectonic activity and tectonic deformation, is the favorable area for shale gas preservation in the Є1n Formation.

Shengling Jiang

Qinghua Zhou

Yanju Li

Rili Yang

A Case Study on Preservation Conditions and Influencing Factors of Shale Gas in the Lower Paleozoic Niutitang Formation, Western Hubei and Hunan, Middle Yangtze Region, China

Horizontal wells are extensively utilized in the development of unconventional reservoirs. However, the logging responses and formation evaluation in horizontal wells can be impacted by factors like anisotropy and tool eccentricity. To investigate the influence of tool eccentricity on acoustic logging response, physical simulation experiments of array acoustic logging were conducted in a scaled borehole formation model under different tool eccentricity conditions. The experimental data were analyzed, and the findings revealed that when the receiver array is parallel to the borehole axis, the P-wave slowness and S-wave slowness remain unaffected by tool eccentricity. However, the amplitudes of the P-wave and S-wave decrease significantly with increasing tool eccentricity, following an approximate negative exponential pattern. Additionally, when the transmitter is centered and the receiver array intersects the borehole axis at an angle, the wave velocities increase significantly with tool eccentricity, with the P-wave velocity showing a faster increase. Conversely, when the transmitter is eccentric and the receiver array intersects the borehole axis at an angle, the wave velocity decreases notably with tool eccentricity, and the P-wave velocity decreases even faster. These findings contribute to a better understanding of the impact of tool eccentricity on array acoustic logging response in horizontal wells and offer guidance for developing correction schemes to address this effect.

Yuanjun Zhang

Dong Wu

Maojie Liao

Xuewen Shi

Feng Chen

Chengguang Zhang

Ming Cai

Jun Tang

Impact of Tool Eccentricity on Acoustic Logging Response in Horizontal Wells: Insights from Physical Simulation Experiments

Reverse circulation impact drilling has the advantages of high drilling efficiency and less dust, which can effectively form holes in hard rock and gravel layer. As integral reverse circulation drill bits used in the conventional down-the-hole (DTH) hammers are only suitable for specific formations, the whole set of DTH hammer needs to be replaced when drilling different formations. In this paper, several types of split drill bits for different drilling technologies are designed. The flow field characteristics of one of the split drill bits is analyzed based on the computational fluid dynamics (CFD) method, with four technic parameters considered, which are input flow rate, number of inlet holes, angle of injection exhaust holes, and diameter of injection exhaust holes, respectively. Three parameters are selected as indicators to evaluate the rationality and performance of the split drill bit, which are injection exhaust hole outlet mass flow rate, ratio of the mass flow rate out of injection exhaust holes to the whole inlet mass flow rate, and maximum pressure at the upper end of the split drill bit. According to the CFD analysis results, the above four technic parameters influence the flow rate and pressure in different rules. Considering the injection capacity, pressure loss, and bit strength, inlet holes of 10, injection exhaust holes with an angle of 50°, and injection exhaust holes with a diameter of 12 mm are recommended to obtain ideal reverse circulation. Different types of split drill bits were manufactured, and drilling experiments were carried out in unconsolidated formations. The maximum drilling rate can reach 1.5 m/min in the drilling experiments. The split drill bit proposed in this paper exhibits excellent adaptability for reverse circulation drilling in loose formations.

Yuanling Shi

Conghui Li

Simulation and Analysis of a Split Drill Bit for Pneumatic DTH Hammer Percussive Rotary Drilling

About this journal

Geofluids publishes research relating to the role of fluids in mineralogical, chemical, and structural evolution of the Earth’s crust.

Journal profile

Meet the editorial board

Geofluids maintains an Editorial Board of practicing researchers from around the world, to ensure manuscripts are handled by editors expert and up-to-date in the field of study.

Editor spotlight

Submit to Special Issue

We currently have a number of Special Issues open for submission. Special Issues highlight emerging areas of research within a field, or provide a venue for a deeper investigation into an existing research area.

Special Issues

Author guidelines

Editorial board

Databases and indexing

title

Geofluids publishes research relating to the role of fluids in mineralogical, chemical, and structural evolution of the Earth’s crust.

Geofluids