Table of Contents Author Guidelines Submit a Manuscript
International Journal of Aerospace Engineering
Volume 2014 (2014), Article ID 439278, 10 pages
http://dx.doi.org/10.1155/2014/439278
Research Article

On the Effects of Modeling As-Manufactured Geometry: Toward Digital Twin

1School of Civil and Environmental Engineering, Cornell University, 642 Rhodes Hall, Ithaca, NY 14853, USA
2NASA Langley Research Center, 188E, Hampton, VA 23681, USA
3The HDF Group, 1800 South Oak Street, Suite 203, Champaign, IL 61820, USA
4School of Civil and Environmental Engineering, Cornell University, 643 Rhodes Hall, Ithaca, NY 14853, USA

Received 23 April 2014; Revised 26 July 2014; Accepted 1 August 2014; Published 27 August 2014

Academic Editor: Christopher J. Damaren

Copyright © 2014 Albert Cerrone et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Albert Cerrone, Jacob Hochhalter, Gerd Heber, and Anthony Ingraffea, “On the Effects of Modeling As-Manufactured Geometry: Toward Digital Twin,” International Journal of Aerospace Engineering, vol. 2014, Article ID 439278, 10 pages, 2014. doi:10.1155/2014/439278