Table of Contents Author Guidelines Submit a Manuscript
International Journal of Aerospace Engineering
Volume 2015, Article ID 723487, 8 pages
http://dx.doi.org/10.1155/2015/723487
Research Article

Stress Distribution on Sandwich Structure with Triangular Grid Cores Suffered from Bending Load

Liaoning Key Laboratory of General Aviation and Liaoning Key Laboratory of Composite Manufacture technology, Shenyang Aerospace University, Shenyang 110136, China

Received 22 February 2015; Revised 13 May 2015; Accepted 18 May 2015

Academic Editor: Ronald M. Barrett

Copyright © 2015 Cui Xu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Z. B. Li, Z. J. Zheng, J. L. Yu, C. Qian, and F. Lu, “Deformation and failure mechanisms of sandwich beams under three-point bending at elevated temperatures,” Composite Structures, vol. 111, no. 1, pp. 285–290, 2014. View at Publisher · View at Google Scholar · View at Scopus
  2. A. C. Manalo, “Behaviour of fibre composite sandwich structures under short and asymmetrical beam shear tests,” Composite Structures, vol. 99, pp. 339–349, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. T. M. McCormack, R. Miller, O. Kesler, and L. J. Gibson, “Failure of sandwich beams with metallic foam cores,” International Journal of Solids and Structures, vol. 38, no. 28-29, pp. 4901–4920, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Yu, E. Wang, J. Li, and Z. Zheng, “Static and low-velocity impact behavior of sandwich beams with closed-cell aluminum-foam core in three-point bending,” International Journal of Impact Engineering, vol. 35, no. 8, pp. 885–894, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. H. G. Allen, Analysis and Design of Structural Sandwich Panels, Pergamon, Oxford, UK, 1969.
  6. V. S. Deshpande, M. F. Ashby, and N. A. Fleck, “Foam topology: bending versus stretching dominated architectures,” Acta Materialia, vol. 49, no. 6, pp. 1035–1040, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. V. S. Deshpande, N. A. Fleck, and M. F. Ashby, “Effective properties of the octet-truss lattice material,” Journal of the Mechanics and Physics of Solids, vol. 49, no. 8, pp. 1747–1769, 2001. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  8. A. G. Evans, J. W. Hutchinson, N. A. Fleck, M. F. Ashby, and H. N. G. Wadley, “The topological design of multifunctional cellular metals,” Progress in Materials Science, vol. 46, no. 3-4, pp. 309–327, 2001. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Hohe and W. Becker, “Effective elastic properties of triangular grid structures,” Composite Structures, vol. 45, no. 2, pp. 131–145, 1999. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Xiong, L. Ma, S. Pan, L. Wu, J. Papadopoulos, and A. Vaziri, “Shear and bending performance of carbon fiber composite sandwich panels with pyramidal truss cores,” Acta Materialia, vol. 60, no. 4, pp. 1455–1466, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. A. Hou and K. Gramoll, “Design and fabrication of CFRP interstage attach fitting for launch vehicles,” Journal of Aerospace Engineering, vol. 12, no. 3, pp. 83–91, 1999. View at Publisher · View at Google Scholar · View at Scopus
  12. D. Y. Han and S. W. Tsai, “Interlocked composite grids design and manufacturing,” Journal of Composite Materials, vol. 37, no. 4, pp. 287–316, 2003. View at Publisher · View at Google Scholar · View at Scopus
  13. F. Hualin and Y. Wei, “An equivalent continuum method of lattice structures,” Acta Mechanica Solida Sinica, vol. 19, no. 2, pp. 103–113, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. H. L. Fan, F. H. Meng, and W. Yang, “Sandwich panels with Kagome lattice cores reinforced by carbon fibers,” Composite Structures, vol. 81, no. 4, pp. 533–539, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. L. J. Gibson and M. F. Ashby, Cellular Solids: Structure and Properties, Cambridge University, Cambridge, UK, 1999.
  16. M. F. Ashby, A. Evans, and N. A. Fleck, Metal Foams: A Design Guide, Butterworth-Heinemann, Boston, Mass, USA, 2000.
  17. H. Fan and D. Fang, “Relation between topology and mechanical properties of cellular materials,” Journal of Tsinghua University (Science and Technology), vol. 47, no. 11, pp. 2072–2075, 2007. View at Google Scholar · View at Scopus
  18. C. Lu, M. Y. Zhao, L. Jie et al., “Stress distribution on composite honeycomb sandwich structure suffered from bending load,” Procedia Engineering, vol. 99, pp. 405–412, 2015, Proceedings of the Asia-Pacific International Symposium on Aerospace Technology, APISAT2014 September 24–26, 2014 Shanghai, China. View at Publisher · View at Google Scholar
  19. G. Q. Zhang, Energy Absorption and Low Velocity Impact Damage Resistance of Composite Lattice Structures, Harbin Institute of Technology, Harbin, China, 2014.
  20. S. L. Li and X. Y. Wang, Fundamentals of Composite Materials Structure Design, Wuhan University, Wuhan, China, 1993.
  21. P. D. Soden, M. J. Hinton, and A. S. Kaddour, “A comparison of the predictive capabilities of current failure theories for composite laminates,” Composites Science and Technology, vol. 58, no. 7, pp. 1225–1254, 1998. View at Publisher · View at Google Scholar · View at Scopus