Research Article
Nonlinear Material Behavior Analysis under High Compression Pressure in Dynamic Conditions
Table 8
Pressure results validation on ANSYS ® workbench.
| Real time firing results obtained by copper crushers (original length = 6.0 mm) | Simulation results on copper crusher (6.0 mm) using ANSYS | Deformation noted [mm] | Pressure obtained [MPa] | Applied pressure [MPa] | Deformation obtained [mm] |
| 0.82 | 289.4 | 289.4 | 0.8135 | 0.85 | 296.9 | 296.9 | 0.8318 | 0.87 | 300.2 | 300.2 | 0.8542 | 0.89 | 304.5 | 304.5 | 0.8556 | 0.92 | 310.8 | 310.8 | 0.8734 |
|
|