About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [467 citations: 1–100 of 430 articles]

Articles published in International Journal of Aerospace Engineering have been cited 467 times. The following is a list of the 430 articles that have cited the articles published in International Journal of Aerospace Engineering.

  • I. P. G. Sopan Rahtika, I. N. G. Wardana, A. A. Sonief, and E. Siswanto, “Experimental Investigation on Flutter Similitude of Thin-Flat Plates,” Advances in Acoustics and Vibration, vol. 2017, pp. 1–8, 2017. View at Publisher · View at Google Scholar
  • Xin Luo, Maocai Wang, Guangming Dai, and Zhiming Song, “Constellation design for earth observation based on the characteristics of the satellite ground track,” Advances in Space Research, 2017. View at Publisher · View at Google Scholar
  • G. Sivavaraprasad, and D. Venkata Ratnam, “Performance Evaluation of Ionospheric Time Delay Forecasting Models using GPS Observations at a Low-latitude Station,” Advances in Space Research, 2017. View at Publisher · View at Google Scholar
  • Wenfeng Nie, Tianhe Xu, Yujun Du, Fan Gao, and Guochang Xu, “Numerical Algebra Solution: A New Algorithm for the State Transition Matrix,” Advances in Space Research, 2017. View at Publisher · View at Google Scholar
  • Josh Mills, and Rafic Ajaj, “Flight Dynamics and Control Using Folding Wingtips: An Experimental Study,” Aerospace, vol. 4, no. 2, pp. 19, 2017. View at Publisher · View at Google Scholar
  • Parvathy Rajendran, Muhammad Masral, and Hairuniza Kutty, “Perpetual Solar-Powered Flight across Regions around the World for a Year-Long Operation,” Aerospace, vol. 4, no. 2, pp. 20, 2017. View at Publisher · View at Google Scholar
  • Raúl de Celis, Luis Cadarso, and Jesús Sánchez, “Guidance and Control for High Dynamic Rotating Artillery Rockets,” Aerospace Science and Technology, 2017. View at Publisher · View at Google Scholar
  • Kung-Ming Chung, Kuan-Huang Lee, and Keh-Chin Chang, “Characteristics of cylindrical cavities in a compressible turbulent flow,” Aerospace Science and Technology, 2017. View at Publisher · View at Google Scholar
  • Shawn S. Keshmiri, Edward Lan, and Richard Hale, “Nonlinear aerodynamics of an unmanned aircraft in wind shear,” Aircraft Engineering and Aerospace Technology, vol. 89, no. 1, pp. 39–51, 2017. View at Publisher · View at Google Scholar
  • Hamid Asgari, Mohsen Fathi Jegarkandi, XiaoQi Chen, and Raazesh Sainudiin, “Design of conventional and neural network based controllers for a single-shaft gas turbine,” Aircraft Engineering and Aerospace Technology, vol. 89, no. 1, pp. 52–65, 2017. View at Publisher · View at Google Scholar
  • M. Zaidabadi nejad, and G.R. Ansarifar, “Estimation of axial xenon oscillations with online parameter adaptation in the P.W.R nuclear reactors using Lyapunov approach based on the multipoint kinetics reactor model,” Annals of Nuclear Energy, vol. 108, pp. 277–300, 2017. View at Publisher · View at Google Scholar
  • K. Essa, H. Hassanin, M.M. Attallah, N.J. Adkins, A.J. Musker, G.T. Roberts, N. Tenev, and M. Smith, “Development and Testing of an Additively Manufactured Monolithic Catalyst Bed for HTP Thruster Applications,” Applied Catalysis A: General, 2017. View at Publisher · View at Google Scholar
  • Jeffrey M. Bergthorson, Yinon Yavor, Jan Palecka, William Georges, Michael Soo, James Vickery, Samuel Goroshin, David L. Frost, and Andrew J. Higgins, “Metal-water combustion for clean propulsion and power generation,” Applied Energy, vol. 186, pp. 13–27, 2017. View at Publisher · View at Google Scholar
  • Zhicong Chen, Lijun Wu, Shuying Cheng, Peijie Lin, Yue Wu, and Wencheng Lin, “Intelligent fault diagnosis of photovoltaic arrays based on optimized kernel extreme learning machine and I-V characteristics,” Applied Energy, 2017. View at Publisher · View at Google Scholar
  • Samuel J. Grauer, Paul J. Hadwin, and Kyle J. Daun, “Improving chemical species tomography of turbulent flows using covariance estimation,” Applied Optics, vol. 56, no. 13, pp. 3900, 2017. View at Publisher · View at Google Scholar
  • Alexander Kuzmin, “Transonic flow instability in the entrance region of a channel with breaks of walls,” Archive of Applied Mechanics, 2017. View at Publisher · View at Google Scholar
  • Dong Meng, Lingjuan Miao, Haijun Shao, and Jun Shen, “A Seventh-Degree Cubature Kalman Filter,” Asian Journal of Control, 2017. View at Publisher · View at Google Scholar
  • Duo-Neng Liu, Zhong-Xi Hou, Zheng Guo, Xi-Xiang Yang, and Xian-Zhong Gao, “Bio-inspired energy-harvesting mechanisms and patterns of dynamic soaring,” Bioinspiration & Biomimetics, vol. 12, no. 1, pp. 016014, 2017. View at Publisher · View at Google Scholar
  • Guo Linliang, Zhu Minghong, Nie Bowen, Kong Peng, and Zhong Chengwen, “Initial virtual flight test for a dynamically similar aircraft model with control augmentation system,” Chinese Journal of Aeronautics, 2017. View at Publisher · View at Google Scholar
  • Weixin Deng, Jialing Le, Shunhua Yang, Wanzhou Zhang, and Ye Tian, “Experimental research of air-throttling ignition for a scramjet at Ma 6.5,” Chinese Journal of Aeronautics, 2017. View at Publisher · View at Google Scholar
  • Rikard Söderberg, Kristina Wärmefjord, Johan S. Carlson, and Lars Lindkvist, “Toward a Digital Twin for real-time geometry assurance in individualized production,” CIRP Annals - Manufacturing Technology, 2017. View at Publisher · View at Google Scholar
  • Guiyuan Mo, and Li Qiao, “A molecular dynamics investigation of n-alkanes vaporizing into nitrogen: transition from subcritical to supercritical,” Combustion and Flame, vol. 176, pp. 60–71, 2017. View at Publisher · View at Google Scholar
  • Ye Tian, Shunhua Yang, Jialing Le, Fuyu Zhong, and Xiaoqiang Tian, “Investigation of combustion process of a kerosene fueled combustor with air throttling,” Combustion and Flame, vol. 179, pp. 74–85, 2017. View at Publisher · View at Google Scholar
  • Yangyang Qiao, Chiara Bisagni, and Yuanli Bai, “Experimental investigation and numerical simulation of unidirectional carbon fiber composite under multi-axial loadings,” Composites Part B: Engineering, 2017. View at Publisher · View at Google Scholar
  • Diego Gonzalez-Aguilera, and Pablo Rodriguez-Gonzalvez, “Drones—An Open Access Journal,” Drones, vol. 1, no. 1, pp. 1, 2017. View at Publisher · View at Google Scholar
  • Francesco Balduzzi, Jernej Drofelnik, Alessandro Bianchini, Giovanni Ferrara, Lorenzo Ferrari, and Michele Sergio Campobasso, “Darrieus Wind Turbine Blade Unsteady Aerodynamics: a Three-Dimensional Navier-Stokes CFD assessment,” Energy, 2017. View at Publisher · View at Google Scholar
  • Farzad Poursadegh, Joshua S. Lacey, Michael J. Brear, and Robert L. Gordon, “On the Fuel Spray Transition to Dense Fluid Mixing at Reciprocating Engine Conditions,” Energy & Fuels, 2017. View at Publisher · View at Google Scholar
  • Alessandro Bianchini, Francesco Balduzzi, Peter Bachant, Giovanni Ferrara, and Lorenzo Ferrari, “Effectiveness of two-dimensional CFD simulations for Darrieus VAWTs: a combined numerical and experimental assessment,” Energy Conversion and Management, vol. 136, pp. 318–328, 2017. View at Publisher · View at Google Scholar
  • R. Bontempo, and M. Manna, “The axial momentum theory as applied to wind turbines: some exact solutions of the flow through a rotor with radially variable load,” Energy Conversion and Management, vol. 143, pp. 33–48, 2017. View at Publisher · View at Google Scholar
  • M. Lo, R. Jones, A. Bowler, M. Dorman, and D. Edwards, “Crack growth at fastener holes containing intergranular cracking,” Fatigue & Fracture of Engineering Materials & Structures, 2017. View at Publisher · View at Google Scholar
  • Binbin Chen, Zhixun Xia, Liya Huang, and Jianxin Hu, “Ignition and combustion model of a single boron particle,” Fuel Processing Technology, vol. 165, pp. 34–43, 2017. View at Publisher · View at Google Scholar
  • N. A. Makarov, T. V. Guseva, N. G. Bardin, and O. I. Rodimov, “Silicificated multidimensional reinforced carbon-carbon materials for a wide range of applications,” Inorganic Materials, vol. 53, no. 1, pp. 1–16, 2017. View at Publisher · View at Google Scholar
  • Zhiyuan Zhang, Runqiang Chi, Baojun Pang, and Gongshun Guan, “Numerical Simulation of Projectile Oblique Impact on Microspacecraft Structure,” International Journal of Aerospace Engineering, vol. 2017, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  • Michael Felux, Mihaela-Simona Circiu, Jiyun Lee, and Florian Holzapfel, “Ionospheric Gradient Threat Mitigation in Future Dual Frequency GBAS,” International Journal of Aerospace Engineering, vol. 2017, pp. 1–10, 2017. View at Publisher · View at Google Scholar
  • Yue You, Hua Wang, Christophe Paccolat, Volker Gass, Jean-Philippe Thiran, and Jiu Ren Li, “Time and Covariance Threshold Triggered Optimal Uncooperative Rendezvous Using Angles-Only Navigation,” International Journal of Aerospace Engineering, vol. 2017, pp. 1–10, 2017. View at Publisher · View at Google Scholar
  • João Felipe de Araujo Martos, Israel da Silveira Rêgo, Sergio Nicholas Pachon Laiton, Bruno Coelho Lima, Felipe Jean Costa, and Paulo Gilberto de Paula Toro, “Experimental Investigation of Brazilian 14-X B Hypersonic Scramjet Aerospace Vehicle,” International Journal of Aerospace Engineering, vol. 2017, pp. 1–10, 2017. View at Publisher · View at Google Scholar
  • Yunfeng Dong, Xiaona Wei, Lu Tian, Fengrui Liu, and Guangde Xu, “A Novel Double Cluster and Principal Component Analysis-Based Optimization Method for the Orbit Design of Earth Observation Satellites,” International Journal of Aerospace Engineering, vol. 2017, pp. 1–15, 2017. View at Publisher · View at Google Scholar
  • Xin Luo, Maocai Wang, Guangming Dai, and Xiaoyu Chen, “A Novel Technique to Compute the Revisit Time of Satellites and Its Application in Remote Sensing Satellite Optimization Design,” International Journal of Aerospace Engineering, vol. 2017, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  • Tsuneyoshi Matsuoka, Kyohei Kamei, Yuji Nakamura, and Harunori Nagata, “Modified Regression Rate Formula of PMMA Combustion by a Single Plane Impinging Jet,” International Journal of Aerospace Engineering, vol. 2017, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  • Keh-Chin Chang, Kuan-Huang Lee, and Kung-Ming Chung, “The Effect of Yaw Angle on a Compressible Rectangular Cavity Flow,” International Journal of Aerospace Engineering, vol. 2017, pp. 1–13, 2017. View at Publisher · View at Google Scholar
  • Jianli Li, Jiancheng Fang, Zhaoxing Lu, and Lijian Bai, “Airborne Position and Orientation System for Aerial Remote Sensing,” International Journal of Aerospace Engineering, vol. 2017, pp. 1–11, 2017. View at Publisher · View at Google Scholar
  • A. Yakeno, Y. Abe, S. Kawai, T. Nonomura, and K. Fujii, “Spanwise modulation effects of local body force on downstream turbulence growth around two-dimensional hump,” International Journal of Heat and Fluid Flow, 2017. View at Publisher · View at Google Scholar
  • Peter C. Ma, Yu Lv, and Matthias Ihme, “An entropy-stable hybrid scheme for simulations of transcritical real-fluid flows,” Journal of Computational Physics, 2017. View at Publisher · View at Google Scholar
  • Craig C. Morris, Cornel Sultan, Joseph A. Schetz, and Rakesh K. Kapania, “State Variance-Based Approach to Flight Dynamic Constraints in Multidisciplinary Design Optimization,” Journal of Guidance, Control, and Dynamics, pp. 1–15, 2017. View at Publisher · View at Google Scholar
  • Utku Eren, Anna Prach, Başaran Bahadır Koçer, Saša V. Raković, Erdal Kayacan, and Behçet Açıkmeşe, “Model Predictive Control in Aerospace Systems: Current State and Opportunities,” Journal of Guidance, Control, and Dynamics, pp. 1–25, 2017. View at Publisher · View at Google Scholar
  • Paul Gilmore, Vishnu-Baba Sundaresan, Jeremy Seidt, and Jarrod Smith, “Design and analysis of a synthetic jet actuator-based fluid atomization device,” Journal of Intelligent Material Systems and Structures, pp. 1045389X1768993, 2017. View at Publisher · View at Google Scholar
  • Y. Abbasi, S. Ali A. Moosavian, and Alireza B. Novinzadeh, “Vision-based formation control of aerial robots in the presence of sensor failure,” Journal of Mechanical Science and Technology, vol. 31, no. 3, pp. 1413–1426, 2017. View at Publisher · View at Google Scholar
  • Hagen Müller, and Michael Pfitzner, “ A flamelet model for transcritical LOx/GCH 4 flames ,” Journal of Physics: Conference Series, vol. 821, pp. 012010, 2017. View at Publisher · View at Google Scholar
  • Jian Chen, Pengwei Liu, Hongtao Xu, Liu Chen, Mo Yang, and Liang Yang, “A detailed investigation of a novel vertical axis Darrieus wind rotor with two sets of blades,” Journal of Renewable and Sustainable Energy, vol. 9, no. 1, pp. 013307, 2017. View at Publisher · View at Google Scholar
  • Hua Li, Xufang Zhang, and Hornsen Tzou, “Diagonal piezoelectric sensors on cylindrical shells,” Journal of Sound and Vibration, vol. 400, pp. 201–212, 2017. View at Publisher · View at Google Scholar
  • Richard Zappulla, Josep Virgili-Llop, Costantinos Zagaris, Hyeongjun Park, and Marcello Romano, “Dynamic Air-Bearing Hardware-in-the-Loop Testbed to Experimentally Evaluate Autonomous Spacecraft Proximity Maneuvers,” Journal of Spacecraft and Rockets, pp. 1–15, 2017. View at Publisher · View at Google Scholar
  • Marisa Cenci, Mirko Di Giacomo, and Francesco Mason, “A note on a mixed routing and scheduling problem on a grid graph,” Journal of the Operational Research Society, 2017. View at Publisher · View at Google Scholar
  • Mat Hussin Ab Talib, and Intan Zaurah Mat Darus, “Intelligent fuzzy logic with firefly algorithm and particle swarm optimization for semi-active suspension system using magneto-rheological damper,” Journal of Vibration and Control, vol. 23, no. 3, pp. 501–514, 2017. View at Publisher · View at Google Scholar
  • Davide Masato, Marco Sorgato, and Giovanni Lucchetta, “Prototyping and Modelling of the Centrifugal Casting Process for Paraffin Waxes,” Materials and Manufacturing Processes, 2017. View at Publisher · View at Google Scholar
  • Yu-feng Zhang, Qi-xun Zhou, Ju-zhong Zhang, Yi Jiang, and Kai Wang, “A FastSLAM Algorithm Based on Nonlinear Adaptive Square Root Unscented Kalman Filter,” Mathematical Problems in Engineering, vol. 2017, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  • Helói F.G. Genari, Nazih Mechbal, Gérard Coffignal, and Eurípedes G.O. Nóbrega, “A reconfigurable damage-tolerant controller based on a modal double-loop framework,” Mechanical Systems and Signal Processing, vol. 88, pp. 334–353, 2017. View at Publisher · View at Google Scholar
  • Julio E. Posada-Roman, David A. Jackson, Mike J. Cole, and Jose A. Garcia-Souto, “Multichannel fiber laser Doppler vibrometer studies of low momentum and hypervelocity impacts,” Optics and Lasers in Engineering, 2017. View at Publisher · View at Google Scholar
  • Xiao Du, and Qunli Xia, “Research on strap-down seeker guidance information for rolling interceptor,” Optik - International Journal for Light and Electron Optics, vol. 129, pp. 183–199, 2017. View at Publisher · View at Google Scholar
  • Hazem El-Rabii, Kirill A. Kazakov, and Maryse Muller, “Experimental and theoretical study of iron and mild steel combustion in oxygen flows,” Physics of Fluids, vol. 29, no. 3, pp. 037104, 2017. View at Publisher · View at Google Scholar
  • Shaun DeSouza, and Corin Segal, “Sub- and supercritical jet disintegration,” Physics of Fluids, vol. 29, no. 4, pp. 047107, 2017. View at Publisher · View at Google Scholar
  • Matthias Klein, Nasser Jazdi, and Michael Weyrich, “A Concept of Semantic Description for e-Production Systems in Manufacturing,” Procedia CIRP, vol. 62, pp. 589–593, 2017. View at Publisher · View at Google Scholar
  • Farzad Bazdidi-Tehrani, Mohammad Hatami, and Ahmad Abouata, “Effects of inlet and outlet boundary conditions on the flow field of synthetic jets,” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 231, no. 2, pp. 107–118, 2017. View at Publisher · View at Google Scholar
  • Abdelkader Benaouali, and Stanisław Kachel, “A surrogate-based integrated framework for the aerodynamic design optimization of a subsonic wing planform shape,” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, pp. 095441001769900, 2017. View at Publisher · View at Google Scholar
  • Mohit Mehndiratta, and Erdal Kayacan, “Receding horizon control of a 3 DOF helicopter using online estimation of aerodynamic parameters,” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, pp. 095441001770341, 2017. View at Publisher · View at Google Scholar
  • Vedant Singh, “Fuel consumption minimization of transport aircraft using real-coded genetic algorithm,” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, pp. 095441001770589, 2017. View at Publisher · View at Google Scholar
  • Li Ding, Rui Ma, Hongtao Wu, Chun Feng, and Qilin Li, “Yaw control of an unmanned aerial vehicle helicopter using linear active disturbance rejection control,” Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, pp. 095965181770848, 2017. View at Publisher · View at Google Scholar
  • M. Elbanhawi, A. Mohamed, R. Clothier, J.L. Palmer, M. Simic, and S. Watkins, “Enabling technologies for autonomous MAV operations,” Progress in Aerospace Sciences, 2017. View at Publisher · View at Google Scholar
  • M. Hassanalian, and A. Abdelkefi, “Classifications, applications, and design challenges of drones: A review,” Progress in Aerospace Sciences, 2017. View at Publisher · View at Google Scholar
  • J.M. O'Brien, T.M. Young, D.C. O'Mahoney, and P.C. Griffin, “Horizontal axis wind turbine research: A review of commercial CFD, FE codes and experimental practices,” Progress in Aerospace Sciences, 2017. View at Publisher · View at Google Scholar
  • Weiwei Cai, and Clemens F. Kaminski, “Tomographic absorption spectroscopy for the study of gas dynamics and reactive flows,” Progress in Energy and Combustion Science, vol. 59, pp. 1–31, 2017. View at Publisher · View at Google Scholar
  • Markus Rauscher, Anton Tremmel, Michael Schardt, and Alexander Koch, “Non-Dispersive Infrared Sensor for Online Condition Monitoring of Gearbox Oil,” Sensors, vol. 17, no. 2, pp. 399, 2017. View at Publisher · View at Google Scholar
  • Tomer Shtark, and Pini Gurfil, “Tracking a Non-Cooperative Target Using Real-Time Stereovision-Based Control: An Experimental Study,” Sensors, vol. 17, no. 4, pp. 735, 2017. View at Publisher · View at Google Scholar
  • Fei Tao, Jiangfeng Cheng, Qinglin Qi, Meng Zhang, He Zhang, and Fangyuan Sui, “Digital twin-driven product design, manufacturing and service with big data,” The International Journal of Advanced Manufacturing Technology, 2017. View at Publisher · View at Google Scholar
  • R. Bontempo, and M. Manna, “Highly accurate error estimate of the momentum theory as applied to wind turbines,” Wind Energy, 2017. View at Publisher · View at Google Scholar
  • Rangharajan Venkatesan, Mrigank Sharad, Kaushik Roy, and Anand Raghunathan, “Energy-Efficient All-Spin Cache Hierarchy Using Shift-Based Writes and Multilevel Storage,” Acm Journal On Emerging Technologies In Computing Systems, vol. 12, no. 1, 2016. View at Publisher · View at Google Scholar
  • Leone Guarnaccia, Riccardo Bevilacqua, and Stefano P. Pastorelli, “Suboptimal LQR-based spacecraft full motion control: Theory and experimentation,” Acta Astronautica, 2016. View at Publisher · View at Google Scholar
  • Nicolas Bérend, and Xavier Olive, “Bi-objective optimization of a multiple-target active debris removal mission,” Acta Astronautica, vol. 122, pp. 324–335, 2016. View at Publisher · View at Google Scholar
  • Xingliang Sun, Hui tian, and Guobiao Cai, “Diameter and position effect determination of diaphragm on hybrid rocket motor,” Acta Astronautica, 2016. View at Publisher · View at Google Scholar
  • Alessandro Mazzetti, Laura Merotto, and Giordano Pinarello, “Paraffin-based hybrid rocket engines applications: A review and a market perspective,” Acta Astronautica, 2016. View at Publisher · View at Google Scholar
  • Aleksander A. Lidtke, Hugh G. Lewis, Roberto Armellin, and Hodei Urrutxua, “Considering the collision probability of Active Debris Removal missions,” Acta Astronautica, 2016. View at Publisher · View at Google Scholar
  • Yuan Tao, Wei-Dong Liu, and Xiao-Qiang Fan, “Investigation of shock-induced boundary layer separation extended to the flat plate leading-edge,” Acta Mechanica, vol. 227, no. 6, pp. 1791–1797, 2016. View at Publisher · View at Google Scholar
  • Bing Luo, Qing-Hao Meng, Jia-Ying Wang, and Shu-Gen Ma, “Simulate the aerodynamic olfactory effects of gas-sensitive UAVs: A numerical model and its parallel implementation,” Advances in Engineering Software, vol. 102, pp. 123–133, 2016. View at Publisher · View at Google Scholar
  • Marilena Di Carlo, Juan Manuel Romero Martin, and Massimiliano Vasile, “Automatic Trajectory Planning for Low-Thrust Active Removal Mission in Low-Earth Orbit,” Advances in Space Research, 2016. View at Publisher · View at Google Scholar
  • Kartik Kumar, Enne Hekma, Abhishek Agrawal, and Francesco Topputo, “Effect of perturbations on debris-to-debris orbital transfers: a quantitative analysis,” Advances in Space Research, 2016. View at Publisher · View at Google Scholar
  • Jason Gross, Yu Gu, and Matthew Rhudy, “Fixed-Wing UAV Attitude Estimation Using Single Antenna GPS Signal Strength Measurements,” Aerospace, vol. 3, no. 2, pp. 14, 2016. View at Publisher · View at Google Scholar
  • Panfeng Huang, Ming Wang, Zhongjie Meng, Fan Zhang, and Zhengxiong Liu, “Attitude takeover control for post-capture of target spacecraft using space robot,” Aerospace Science and Technology, 2016. View at Publisher · View at Google Scholar
  • Ye Tian, Shunhua Yang, and Jialing Le, “Numerical study on effect of air throttling on combustion mode formation and transition in a dual-mode scramjet combustor,” Aerospace Science and Technology, 2016. View at Publisher · View at Google Scholar
  • Dahai Zhang, and Qingguo Fei, “Effect of bird geometry and impact orientation in bird striking on a rotary jet-engine fan analysis using SPH method,” Aerospace Science and Technology, 2016. View at Publisher · View at Google Scholar
  • Vijay Kumar Patidar, Rajesh Yadav, and Sudhir Joshi, “Numerical investigation of the effect of stagger on the aerodynamic characteristics of a Busemann biplane,” Aerospace Science and Technology, 2016. View at Publisher · View at Google Scholar
  • Ye Tian, Shunhua Yang, and Jialing Le, “Study on Flame Stabilization of a hydrogen and kerosene fueled combustor,” Aerospace Science and Technology, 2016. View at Publisher · View at Google Scholar
  • R. Bontempo, and M. Manna, “Analysis and Evaluation of the Momentum Theory Errors as Applied to Propellers,” AIAA Journal, pp. 0–0, 2016. View at Publisher · View at Google Scholar
  • Yogesh Kumar Sinha, B. T. N. Sridhar, and R. Kishnakumar, “Study of Thermo-Mechanical Properties of HTPB–Paraffin Solid Fuel,” Arabian Journal for Science and Engineering, 2016. View at Publisher · View at Google Scholar
  • Jeannette Heiligers, Malcolm Macdonald, and Jeffrey S. Parker, “Extension of Earth-Moon libration point orbits with solar sail propulsion,” Astrophysics and Space Science, vol. 361, no. 7, 2016. View at Publisher · View at Google Scholar
  • Xiao Wang, Lingxi Li, Yong Yuan, Peijun Ye, and Fei-Yue Wang, “ACP-based social computing and parallel intelligence: Societies 5.0 and beyond,” CAAI Transactions on Intelligence Technology, 2016. View at Publisher · View at Google Scholar
  • D. B. Schwinn, D. Kohlgrüber, J. Scherer, and M. H. Siemann, “A parametric aircraft fuselage model for preliminary sizing and crashworthiness applications,” CEAS Aeronautical Journal, 2016. View at Publisher · View at Google Scholar
  • E. Zhang, X. He, D. Yin, L. Han, M. Qiu, T. Xu, R. Xia, L. Xu, R. Yin, and W. De, “Increased expression of long noncoding RNA TUG1 predicts a poor prognosis of gastric cancer and regulates cell proliferation by epigenetically silenci,” Cell Death & Disease, vol. 7, 2016. View at Publisher · View at Google Scholar
  • Gao Xinglong, Zhang Qingbin, and Tang Qiangang, “Parachute dynamics and perturbation analysis of precision airdrop system,” Chinese Journal of Aeronautics, 2016. View at Publisher · View at Google Scholar
  • Su Erlong, and Luo Jianjun, “Visualization and PIV study of flapping wingtip,” Chinese Journal of Aeronautics, 2016. View at Publisher · View at Google Scholar
  • Chi-Jeng Bai, Wei-Cheng Wang, and Po-Wei Chen, “Experimental and numerical studies on the performance and surface streamlines on the blades of a horizontal-axis wind turbine,” Clean Technologies and Environmental Policy, 2016. View at Publisher · View at Google Scholar
  • A. Yu. Krainov, and V. A. Poryazov, “Mathematical modeling of combustion of a frozen suspension of nanosized aluminum,” Combustion Explosion And Shock Waves, vol. 52, no. 2, pp. 177–183, 2016. View at Publisher · View at Google Scholar