Assessment of a PML Boundary Condition for Simulating an MRI Radio Frequency Coil
Figure 3
(a) Measured of the coil
(obtained with a network analyzer). is the mode of interest (mode 1); (b) calculated
resonance pattern with and grids. Only one mode
resonated at 174 MHz; (c) calculated resonance pattern with and
grids. The number of modes and resonance frequencies is in excellent agreement with the measured ;
(d) calculated resonance pattern with and
grids. Mode 0 and mode 1 are split (e.g., mode 1 split into two peaks: and
.)