Table of Contents Author Guidelines Submit a Manuscript
International Journal of Antennas and Propagation
Volume 2009 (2009), Article ID 920947, 8 pages
http://dx.doi.org/10.1155/2009/920947
Research Article

The Effect of Fabrication Method on Passive UHF RFID Tag Performance

1Rauma Research Unit, Institute of Electronics, Tampere University of Technology, Kalliokatu 2, 26100 Rauma, Finland
2Department of Electronics, Tampere University of Technology-Pori, Pohjoisranta 11 A, 28100 Pori, Finland

Received 22 October 2008; Revised 11 February 2009; Accepted 7 May 2009

Academic Editor: You Chung Chung

Copyright © 2009 Toni Björninen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Toni Björninen, Sari Merilampi, Leena Ukkonen, Lauri Sydänheimo, and Pekka Ruuskanen, “The Effect of Fabrication Method on Passive UHF RFID Tag Performance,” International Journal of Antennas and Propagation, vol. 2009, Article ID 920947, 8 pages, 2009. doi:10.1155/2009/920947