Table of Contents Author Guidelines Submit a Manuscript
International Journal of Antennas and Propagation
Volume 2012, Article ID 612170, 6 pages
http://dx.doi.org/10.1155/2012/612170
Research Article

Directive Microstrip Antennas for Specific Below −2.45 GHz Applications

1Área de Tecnología Electrónica, Universidad Miguel Hernández, Avenida Universidad s/n, 03202 Elche, Spain
2Department of Electronic Engineering, Universitat de València, Avenida Dr. Moliner 50, 46100 Burjassot, Spain

Received 29 November 2011; Accepted 29 January 2012

Academic Editor: Deb Chatterjee

Copyright © 2012 E. Ávila-Navarro and C. Reig. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. I. Votis, P. Kostarakis, and A. A. Alexandridis, “Design, analysis, and measurements of an antenna structure for 2.4 GHz wireless applications,” International Journal of Antennas and Propagation, vol. 2010, Article ID 796154, 14 pages, 2010. View at Publisher · View at Google Scholar
  2. E. Ávila-Navarro, J. A. Carrasco, and C. Reig, “Printed dipole antennas for personal communication systems,” IETE Technical Review, vol. 27, no. 4, pp. 286–292, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. T. Björninen, S. Merilampi, L. Ukkonen, L. Sydänheimo, and P. Ruuskanen, “The effect of fabrication method on passive UHF RFID tag performance,” International Journal of Antennas and Propagation, vol. 2009, Article ID 920947, 8 pages, 2009. View at Publisher · View at Google Scholar
  4. H. Yagi, “Beam transmission of the ultra short waves,” Proceedings IRE, vol. 16, pp. 715–741, 1928. View at Google Scholar
  5. A. K. Sowpati, V. K. Palukuru, V. Pynttäri, R. Mäkinen, M. V. Kartikeyan, and H. Jantunen, “Performance of printable antennas with different conductor thickness,” Progress In Electromagnetics Research Letters, vol. 13, pp. 59–65, 2010. View at Google Scholar
  6. Y. Qian, W. R. Deal, N. Kaneda, and T. Itoh, “Microstrip-fed quasi-Yagi antenna with broadband characteristics,” Electronics Letters, vol. 34, no. 23, pp. 2194–2196, 1998. View at Google Scholar · View at Scopus
  7. C. Reig, E. A. Navarro, and V. Such, “FDTD analysis of an E-sectoral horn excited by an opened microstrip,” Microwave and Optical Technology Letters, vol. 13, no. 5, pp. 294–297, 1996. View at Google Scholar · View at Scopus
  8. C. Reig, E. A. Navarro, and V. Such, “Calculation of the characteristic impedance of microstrips using a full-wave 2-D FDTD scheme,” Microwave and Optical Technology Letters, vol. 16, no. 1, pp. 58–60, 1997. View at Google Scholar · View at Scopus
  9. E. Ávila-Navarro, A. Segarra-Martínez, J. A. Carrasco, and C. Reig, “A low-cost compact uniplanar Quasi-Yagi printed antenna,” Microwave and Optical Technology Letters, vol. 50, no. 3, pp. 731–735, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Cano, E. López-Baeza, J. L. Añón, C. Reig, and C. Millán-Scheiding, “Wireless sensor network for soil moisture applications,” in International Conference on Sensor Technologies and Applications (SENSORCOMM '07), pp. 508–513, October 2007. View at Publisher · View at Google Scholar
  11. E. Ávila-Navarro, J. A. Carrasco, and C. Reig, “Design of Yagi-like printed antennas for wlan applications,” Microwave and Optical Technology Letters, vol. 49, no. 9, pp. 2174–2178, 2007. View at Publisher · View at Google Scholar
  12. E. Ávila-Navarro, J. A. Carrasco, and C. Reig, “Dual printed antenna for Wi-Fi applications,” IEEE Antennas and Wireless Propagation Letters, vol. 8, Article ID 4967968, pp. 596–598, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. E. Ávila-Navarro, J. M. Blanes, J. A. Carrasco, C. Reig, and E. A. Navarro, “A new bi-faced log periodic printed antenna,” Microwave and Optical Technology Letters, vol. 48, no. 2, pp. 402–405, 2006. View at Publisher · View at Google Scholar · View at Scopus