Research Article
Design of Joint Spatial and Power Domain Multiplexing Scheme for Massive MIMO Systems
Table 2
Major simulation parameters.
| Parameters | Values |
| Tx power | 46 dBm for 3D-UMa 500 m |
| Duplex | FDD |
| BS antenna configurations | Antenna elements config: (±45), 0.5λH/0.8λV |
| Traffic model | Full buffer model |
| Wrapping method | Geographical distance based |
| Metrics | 5%, 50% UPT |
| System bandwidth | 10 MHz (50 PRBs) |
| UE attachment | Based on RSRP |
| Number of UEs per cell | 4/8/12/16 |
| Network synchronization | Synchronized |
| UE speed | 3 km/h |
| UE distribution | According to 36.873 [20] |
| Receiver | Nonideal channel estimation and interference modeling, detailed guidelines according to Rel-12 assumptions | MMSE-IRC and IC receiver, and detailed guidelines according to Rel-12 assumptions [21] |
| UE Rx antenna configuration | 1 Rx |
| Feedback | PUSCH 3-2 | CQI, PMI, and RI reporting triggered per 5 ms | Feedback delay is 5 ms | Rel-10 8 Tx codebook |
| Transmission scheme | Dynamic SU/MU-MIMO with rank adaptation |
| Overhead | 3 symbols for DL CCHs, 2 CRS ports, and DM-RS with 12 REs per PRB |
| CSI-RS | 5 msec |
| SRS | 1 Tx, 5 ms periodicity, wideband |
|
|