Table of Contents Author Guidelines Submit a Manuscript
International Journal of Antennas and Propagation
Volume 2016 (2016), Article ID 9365756, 9 pages
http://dx.doi.org/10.1155/2016/9365756
Research Article

A Wearable Wireless Energy Link for Thin-Film Batteries Charging

Department of Engineering for Innovation, University of Salento, Via Monteroni, 73100 Lecce, Italy

Received 26 November 2015; Accepted 28 February 2016

Academic Editor: Jaume Anguera

Copyright © 2016 Giuseppina Monti et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. A. R. Osman, M. K. A. Rahim, N. A. Samsuri, H. A. M. Salim, and M. F. Ali, “Embroidered fully textile wearable antenna for medical monitoring applications,” Progress in Electromagnetics Research, vol. 117, pp. 321–337, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. Y. Li, R. Vyas, A. Rida, J. Pan, and M. M. Tentzeris, “Wearable RFID-enabled sensor nodes for biomedical applications,” in Proceedings of the 58th Electronic Components and Technology Conference (ECTC '08), pp. 2156–2159, IEEE, Lake Buena Vista, Fla, USA, May 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. C. Hertleer, H. Rogier, and L. Van Langenhove, “A textile antenna for protective clothing,” in Proceedings of the IET Seminar on Antennas and Propagation for Body-Centric Wireless Communications, pp. 44–46, April 2007.
  4. L. Vallozzi, P. Van Torre, C. Hertleer, H. Rogier, M. Moeneclaey, and J. Verhaevert, “Wireless communication for firefighters using dual-polarized textile antennas integrated in their garment,” IEEE Transactions on Antennas and Propagation, vol. 58, no. 4, pp. 1357–1368, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. Z. Chun-Qing, W. Jun-Hong, and H. Yu-Nan, “Coupled planar dipole UWB antenna design for wearable computer,” in Proceedings of the International Conference on Microwave and Millimeter Wave Technology (ICMMT '07), pp. 1–4, April 2007. View at Publisher · View at Google Scholar
  6. W. Thompson, R. Cepeda, G. Hilton, M. A. Beach, and S. Armour, “An improved antenna mounting for ultra-wideband on-body communications and channel characterization,” IEEE Transactions on Microwave Theory and Techniques, vol. 59, no. 4, pp. 1102–1108, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. B. Sanz-Izquierdo, J. A. Miller, J. C. Batchelor, and M. I. Sobhy, “Dual-band wearable metallic button antennas and transmission in body area networks,” IET Microwaves, Antennas and Propagation, vol. 4, no. 2, pp. 182–190, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. H. Marques and B. V. Borges, “Contactless battery charger with high relative separation distance and improved efficiency,” in Proceedings of the 33rd International Telecommunications Energy Conference (INTELEC '11), pp. 1–8, Amsterdam, The Netherlands, October 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. K.-C. Wan, Q. Xue, X. Liu, and S. Y. Hui, “Passive radio-frequency repeater for enhancing signal reception and transmission in a wireless charging platform,” IEEE Transactions on Industrial Electronics, vol. 61, no. 4, pp. 1750–1757, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. A. N. Laskovski, M. R. Yuce, and T. Dissanayake, “Stacked spirals for biosensor telemetry,” IEEE Sensors Journal, vol. 11, no. 6, pp. 1484–1490, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. K. Jung, Y.-H. Kim, E. J. Choi, H. J. Kim, and Y.-J. Kim, “Wireless power transmission for implantable devices using inductive component of closed magnetic circuit,” Electronics Letters, vol. 45, no. 1, pp. 21–22, 2009. View at Publisher · View at Google Scholar
  12. G. Monti, L. Tarricone, M. Dionigi, and M. Mongiardo, “Magnetically coupled resonant wireless power transmission: an artificial transmission line approach,” in Proceedings of the 42nd European Microwave Conference (EuMC '12), pp. 233–236, IEEE, Amsterdam, The Netherlands, October-November 2012.
  13. A. Costanzo, M. Dionigi, D. Masotti et al., “Electromagnetic energy harvesting and wireless power transmission: a unified approach,” Proceedings of the IEEE, vol. 102, no. 11, pp. 1692–1711, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Rivière, A. Douyère, F. Alicalapa, and J. D. Lan Sun Luk, “Study of complete WPT system for WSN applications at low power level,” Electronics Letters, vol. 46, no. 8, pp. 597–598, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. G. Monti, L. Corchia, and L. Tarricone, “UHF wearable rectenna on textile materials,” IEEE Transactions on Antennas and Propagation, vol. 61, no. 7, pp. 3869–3873, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. D. Masotti, A. Costanzo, and S. Adami, “Design and realization of a wearable multi-frequency RF energy harvesting system,” in Proceedings of the 5th European Conference on Antennas and Propagation, pp. 517–520, April 2011. View at Scopus
  17. G. Monti, L. Corchia, and L. Tarricone, “Textile logo antennas,” in Proceedings of the 14th Mediterranean Microwave Symposium (MMS '14), pp. 1–5, Marrakech, Morocco, December 2014. View at Publisher · View at Google Scholar
  18. G. Monti and F. Congedo, “UHF rectenna using a bowtie antenna,” Progress in Electromagnetics Research C, vol. 26, pp. 181–192, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. G. Monti, L. Corchia, and L. Tarricone, “A microstrip antenna with a reconfigurable pattern for RFID applications,” Progress In Electromagnetics Research B, no. 45, pp. 101–116, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. G. Monti, L. Corchia, and L. Tarricone, “Planar bowtie antenna with a reconfigurable radiation pattern,” Progress in Electromagnetics Research C, vol. 28, pp. 61–70, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. F. Congedo, G. Monti, L. Tarricone, and M. Cannarile, “Broadband bowtie antenna for RF energy scavenging applications,” in Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP '11), pp. 335–337, Rome, Italy, April 2011. View at Scopus
  22. G. Monti, L. Corchia, and L. Tarricone, “A wearable wireless energy link,” in Proceedings of the 45th European Microwave Conference (EuMC '15), pp. 143–146, Paris, France, September 2015. View at Publisher · View at Google Scholar
  23. M. Dionigi, A. Costanzo, and M. Mongiardo, “Network methods for analysis and design of resonant wireless power transfer systems,” in Wireless Power Transfer—Principles and Engineering Explorations, K. Y. Kim, Ed., InTech, 2012, http://www.intechopen.com/books/wireless-power-transfer-principles-and-engineering-explorations/networks-methods-for-the-analysis-and-design-of-wireless-power-transfer-systems. View at Google Scholar
  24. ADFORS Saint-Gobain, http://www.sg-adfors.com/Technologies/Fabrics/Glassmat.
  25. G. Monti, L. Corchia, and L. Tarricone, “Fabrication techniques for wearable antennas,” in Proceedings of the European Radar Conference (EuRAD '13), Nuremberg, Germany, October 2013.
  26. G. Monti, L. Corchia, and L. Tarricone, “Logo antenna on textile materials,” in Proceedings of the European Microwave Conference (EuMC '14), pp. 516–519, Rome, Italy, October 2014. View at Publisher · View at Google Scholar
  27. http://www.awrcorp.com/products.
  28. “HSMS-282x: Surface Mount RF Schottky Barrier Diodes,” http://www.avagotech.com/docs/AV02-1320EN.
  29. http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=lm2767&fileType=pdf.
  30. http://www.linear.com/product/LTC4071.