Table of Contents Author Guidelines Submit a Manuscript
International Journal of Antennas and Propagation
Volume 2017 (2017), Article ID 3078103, 7 pages
https://doi.org/10.1155/2017/3078103
Research Article

Impacts of Absorber Loadings on Simulating the Multipath Channel in a Reverberation Chamber

1State Key Laboratory of Rail Traffic Control and Safety, Beijing Jiaotong University, Beijing, China
2Division of Electronics and Information Technology, National Institute of Metrology, Beijing, China
3Communications Technology Laboratory, National Institute of Standards and Technology, Boulder, CO, USA

Correspondence should be addressed to Ruisi He; nc.ude.utjb@eh.isiur

Received 21 September 2016; Accepted 7 November 2016; Published 4 April 2017

Academic Editor: Ana Alejos

Copyright © 2017 Xin Zhou et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. L. Holloway, D. A. Hill, M. Sandroni et al., “Use of reverberation chambers to determine the shielding effectiveness of physically small, electrically large enclosures and cavities,” IEEE Transactions on Electromagnetic Compatibility, vol. 50, no. 4, pp. 770–782, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. C. L. Holloway, D. A. Hill, J. Ladbury, G. Koepke, and R. Garzia, “Shielding effectiveness measurements of materials using nested reverberation chambers,” IEEE Transactions on Electromagnetic Compatibility, vol. 45, no. 2, pp. 350–356, 2003. View at Publisher · View at Google Scholar · View at Scopus
  3. X. Chen, B. P. Einarsson, and P.-S. Kildal, “Improved MIMO throughput with inverse power allocation—study using USRP measurement in reverberation chamber,” IEEE Antennas & Wireless Propagation Letters, vol. 13, no. 13, pp. 1494–1496, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. R. Recanatini, F. Moglie, and V. M. Primiani, “Performance and immunity evaluation of complete wlan systems in a large reverberation chamber,” IEEE Transactions on Electromagnetic Compatibility, vol. 55, no. 5, pp. 806–815, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. S. J. Floris, K. A. Remley, and C. L. Holloway, “Bit error rate measurements in reverberation chambers using real-time vector receivers,” IEEE Antennas and Wireless Propagation Letters, vol. 9, no. 1, pp. 619–622, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. P. Corona, G. Ferrara, and M. Migliaccio, “Reverberating chamber electromagnetic field in presence of an unstirred component,” IEEE Transactions on Electromagnetic Compatibility, vol. 42, no. 2, pp. 111–115, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. E. Genender, C. L. Holloway, K. A. Remley, J. Ladbury, G. Koepke, and H. Garbe, “Use of reverberation chamber to simulate the power delay profile of a wireless environment,” in Proceedings of the IEEE International Symposium on Electromagnetic Compatibility (EMC '08), pp. 1–6, September 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. E. Genender, C. L. Holloway, K. A. Remley, J. M. Ladbury, G. Koepke, and H. Garbe, “Simulating the multipath channel with a reverberation chamber: application to bit error rate measurements,” IEEE Transactions on Electromagnetic Compatibility, vol. 52, no. 4, pp. 766–777, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Herbert, T.-H. Loh, I. Wassell, and J. Rigelsford, “On the analogy between vehicle and vehicle-like cavities with reverberation chambers,” IEEE Transactions on Antennas and Propagation, vol. 62, no. 12, pp. 6236–6245, 2014. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  10. X. Chen, P.-S. Kildal, C. Orlenius, and J. Carlsson, “Channel sounding of loaded reverberation chamber for over-the-air testing of wireless devices: coherence bandwidth versus average mode bandwidth and delay spread,” IEEE Antennas and Wireless Propagation Letters, vol. 8, pp. 678–681, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. X. Chen and P.-S. Kildal, “Theoretical derivation and measurements of the relationship between coherence bandwidth and RMS delay spread in reverberation chamber,” in Proceedings of the 3rd European Conference on Antennas and Propagation (EuCAP '09), pp. 2687–2690, Berlin, Germany, March 2009. View at Scopus
  12. K. A. Remley, S. J. Floris, H. A. Shah, and C. L. Holloway, “Static and dynamic propagation-channel impairments in reverberation chambers,” IEEE Transactions on Electromagnetic Compatibility, vol. 53, no. 3, pp. 589–599, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. J. L. Pinto and I. Darwazeh, “Error vector magnitude relation to magnitude and phase distortion in 8-PSK systems,” Electronics Letters, vol. 37, no. 7, pp. 437–438, 2001. View at Publisher · View at Google Scholar · View at Scopus
  14. V. A. Thomas, S. Kumar, S. Kalyani, and M. El-Hajjar, “Error vector magnitude analysis of fading SIMO channels relying on MRC reception,” IEEE Transactions on Communications, vol. 64, no. 4, pp. 1786–1797, 2016. View at Publisher · View at Google Scholar
  15. P. A. Bello, “Characterization of randomly time-variant linear channels,” IEEE Transactions on Communications Systems, vol. 11, no. 4, pp. 360–393, 1963. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Laurila, K. Kalliola, M. Toeltsch, K. Hugl, P. Vainikainen, and E. Bonek, “Wideband 3D characterization of mobile radio channels in urban environment,” IEEE Transactions on Antennas & Propagation, vol. 50, no. 2, pp. 233–243, 2002. View at Publisher · View at Google Scholar · View at Scopus
  17. X. Zhou, Z. Zhong, B. Zhang et al., “Experimental characterization and correlation analysis of indoor channels at 15 GHz,” International Journal of Antennas and Propagation, vol. 2015, Article ID 601835, 11 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  18. A. F. Molisch and M. Steinbauer, “Condensed parameters for characterizing wideband mobile radio channels,” International Journal of Wireless Information Networks, vol. 6, no. 3, pp. 133–154, 1999. View at Publisher · View at Google Scholar · View at Scopus
  19. D. A. Hill, M. T. Ma, A. R. Ondrejka, B. F. Riddle, M. L. Crawford, and R. T. Johnk, “Aperture excitation of electrically large, lossy cavities,” IEEE Transactions on Electromagnetic Compatibility, vol. 36, no. 3, pp. 169–178, 1994. View at Publisher · View at Google Scholar · View at Scopus
  20. IEC, “Electromagnetic compatibility (EMC)-part 4–21: testing and measurement techniques-reverberation chamber test methods,” Tech. Rep. IEC 61000-4-21, 2003. View at Google Scholar
  21. L. R. Arnaut, “Measurement uncertainty in reverberation chambers-I. Sample statistics,” NPL Report TQE 2, National Physical Laboratory, Teddington, UK, 2008. View at Google Scholar
  22. A. Georgiadis, “Gain, phase imbalance, and phase noise effects on error vector magnitude,” IEEE Transactions on Vehicular Technology, vol. 53, no. 2, pp. 443–449, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. C. Jastrow, S. Priebe, B. Spitschan et al., “Wireless digital data transmission at 300 GHz,” Electronics Letters, vol. 46, no. 9, pp. 661–663, 2010. View at Publisher · View at Google Scholar · View at Scopus