Table of Contents Author Guidelines Submit a Manuscript
International Journal of Antennas and Propagation
Volume 2017 (2017), Article ID 7327398, 8 pages
https://doi.org/10.1155/2017/7327398
Research Article

3D Printed and Photonically Cured Graphene UHF RFID Tags on Textile, Wood, and Cardboard Substrates

1BioMediTech Institute and Faculty of Biomedical Sciences and Engineering, Tampere University of Technology, Tampere, Finland
2Microelectronics Research Unit, University of Oulu, Oulu, Finland
3School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA

Correspondence should be addressed to M. Akbari

Received 3 April 2017; Accepted 22 May 2017; Published 20 June 2017

Academic Editor: Yizhu Shen

Copyright © 2017 M. Akbari et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

M. Akbari, H. He, J. Juuti, M. M. Tentzeris, J. Virkki, and L. Ukkonen, “3D Printed and Photonically Cured Graphene UHF RFID Tags on Textile, Wood, and Cardboard Substrates,” International Journal of Antennas and Propagation, vol. 2017, Article ID 7327398, 8 pages, 2017. doi:10.1155/2017/7327398