Table of Contents Author Guidelines Submit a Manuscript
International Journal of Antennas and Propagation
Volume 2017, Article ID 7360329, 7 pages
https://doi.org/10.1155/2017/7360329
Research Article

Ka-Band Lightweight High-Efficiency Wideband 3D Printed Reflector Antenna

School of Electronic and Information Engineering, Beihang University, Beijing, China

Correspondence should be addressed to Yu Zhai; nc.ude.aaub@uyiahz

Received 29 September 2017; Revised 30 October 2017; Accepted 6 November 2017; Published 25 December 2017

Academic Editor: Yu Jian Cheng

Copyright © 2017 Yu Zhai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Yu Zhai, Ding Xu, and Yan Zhang, “Ka-Band Lightweight High-Efficiency Wideband 3D Printed Reflector Antenna,” International Journal of Antennas and Propagation, vol. 2017, Article ID 7360329, 7 pages, 2017. https://doi.org/10.1155/2017/7360329.