Table of Contents Author Guidelines Submit a Manuscript
International Journal of Antennas and Propagation
Volume 2017 (2017), Article ID 8715020, 8 pages
https://doi.org/10.1155/2017/8715020
Research Article

A Fast Finite-Difference Time Domain Simulation Method for the Source-Stirring Reverberation Chamber

1Department of Information and Communication Engineering, Harbin Engineering University, Harbin, Heilongjiang 150001, China
2College of Engineering and Computational Sciences, Colorado School of Mines, Golden, CO 80401, USA

Correspondence should be addressed to Chongyi Yue; nc.ude.uebrh@iygnohceuy

Received 19 December 2016; Accepted 13 February 2017; Published 8 March 2017

Academic Editor: Safieddin Safavi-Naeini

Copyright © 2017 Wenxing Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Q. Xu, Y. Huang, S. Yuan, L. Xing, and Z. Tian, “Two alternative methods to measure the radiated emission in a reverberation chamber,” International Journal of Antennas and Propagation, vol. 2016, Article ID 5291072, 7 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. J. Anguera, A. Andújar, M.-C. Huynh, C. Orlenius, C. Picher, and C. Puente, “Advances in antenna technology for wireless handheld devices,” International Journal of Antennas and Propagation, vol. 2013, Article ID 838364, 25 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. IEC, “Electromagnetic compatibility (EMC)—part 4-21: testing and measurement techniques—reverberation chamber test methods,” IEC 61000-4-21, 2011. View at Google Scholar
  4. P. Corona, J. Ladbury, and G. Latmiral, “Reverberation-chamber research-then and now: a review of early work and comparison with current understanding,” IEEE Transactions on Electromagnetic Compatibility, vol. 44, no. 1, pp. 87–94, 2002. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. Huang and D. J. Edwards, “Novel reverberating chamber: the source-stirred chamber,” in Proceedings of the 8th International Conference on Electromagnetic Compatibility, September 1992. View at Scopus
  6. V. Mariani Primiani, P. Russo, and G. Cerri, “Experimental characterization of a reverberation chamber excited by the source stirring technique,” in Proceedings of the International Symposium on Electromagnetic Compatibility (EMC EUROPE '12), pp. 1–6, September 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. G. Cerri, C. D. Sanctis, V. M. Primiani, C. Monteverde, and P. Russo, “Array of antennas design for the source stirring technique,” in Proceedings of the 20th International Zurich Symposium on Electromagnetic Compatibility, pp. 105–108, IEEE, Zurich, Switzerland, January 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. W. X. Li, C. Y. Yue, and W. H. Yu, “Study on array source stirring reverberation chamber,” Applied Computational Electromagnetics Society Journal, vol. 29, no. 12, pp. 1067–1076, 2014. View at Google Scholar · View at Scopus
  9. K. Harima and Y. Yamanaka, “FDTD analysis on the effect of stirrers in a reverberation chamber,” in Proceedings of the 4th International Symposium on Electromagnetic Compatability, pp. 260–263, Tokyo, Japan, 1999. View at Publisher · View at Google Scholar
  10. J. S. Kim and R. Mittra, “Performance evaluation of a mode-stirred reverberation chamber using the finite difference time domain (FDTD) simulation,” in Proceedings of the Asia-Pacific Symposium on Electromagnetic Compatibility, pp. 173–176, Singapore, May 2012.
  11. F. Moglie and A. P. Pastore, “FDTD analysis of plane wave superposition to simulate susceptibility tests in reverberation chambers,” IEEE Transactions on Electromagnetic Compatibility, vol. 48, no. 1, pp. 195–202, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. G. Cerri, V. M. Primiani, and P. Russo, “Reverberation chamber field modeling for application to the source stirring technique,” in Proceedings of the Asia-Pacific International Symposium on Electromagnetic Compatibility (APEMC '10), pp. 536–539, IEEE, Beijing, China, April 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. G. Cerri, V. M. Primiani, C. Monteverde, and P. Russo, “A theoretical feasibility study of a source stirring reverberation chamber,” IEEE Transactions on Electromagnetic Compatibility, vol. 51, no. 1, pp. 3–11, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. F. Moglie, “Convergence of the reverberation chambers to the equilibrium analyzed with the finite-difference time-domain algorithm,” IEEE Transactions on Electromagnetic Compatibility, vol. 46, no. 3, pp. 469–476, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. C. L. Holloway, D. A. Hill, J. M. Ladbury, and G. Koepke, “Requirements for an effective reverberation chamber: unloaded or loaded,” IEEE Transactions on Electromagnetic Compatibility, vol. 48, no. 1, pp. 187–194, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. Y. Zhao, G. Wei, Y. Cui, L. Fan, X. Pan, and H. Wan, “Acceleration technique of modeling lossy reverberation chamber using FDTD method based on quality factor,” IEEE Antennas and Wireless Propagation Letters, vol. 14, pp. 686–689, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. G. Orjubin, F. Petit, E. Richalot, S. Mengué, and O. Picon, “Cavity losses modeling using lossless FDTD method,” IEEE Transactions on Electromagnetic Compatibility, vol. 48, no. 2, pp. 429–431, 2006. View at Publisher · View at Google Scholar · View at Scopus
  18. P. Bonnet, R. Vernet, S. Girard, and F. Paladian, “FDTD modelling of reverberation chamber,” Electronics Letters, vol. 41, no. 20, pp. 1101–1102, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. A. Z. Elsherbeni and V. Demir, The Finite-Difference Time-Domain Method for Electromagnetics with MATLAB Simulations, SciTech Publishing, Edison, NJ, USA, 2nd edition, 2016.