Table of Contents Author Guidelines Submit a Manuscript
International Journal of Antennas and Propagation
Volume 2018 (2018), Article ID 3241581, 7 pages
Research Article

Low-Cost Printed Flexible Antenna by Using an Office Printer for Conformal Applications

1Wireless Communication Centre, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
2Department of Electrical Engineering, Faculty of Engineering, Islamic University of Madinah, Al-Madinah, Saudi Arabia
3Department of Electrical Engineering, Mu’tah University, Mu’tah, Jordan
4Charles Sturt University, Bathurst, NSW, Australia
5Faculty of Engineering, Multimedia University, Cyberjaya, Malaysia

Correspondence should be addressed to Hassan Tariq Chattha; moc.liamtoh@34ahttahc

Received 24 August 2017; Revised 17 November 2017; Accepted 6 December 2017; Published 14 February 2018

Academic Editor: Xuejun Lu

Copyright © 2018 Kashif Nisar Paracha et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Kashif Nisar Paracha, Sharul Kamal Abdul Rahim, Hassan Tariq Chattha, Saqer Saleh Aljaafreh, Sabih ur Rehman, and Yew Chiong Lo, “Low-Cost Printed Flexible Antenna by Using an Office Printer for Conformal Applications,” International Journal of Antennas and Propagation, vol. 2018, Article ID 3241581, 7 pages, 2018. doi:10.1155/2018/3241581