Table of Contents Author Guidelines Submit a Manuscript
International Journal of Biomaterials
Volume 2012, Article ID 245727, 14 pages
http://dx.doi.org/10.1155/2012/245727
Research Article

Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting

1Department of Metallurgical and Materials Engineering, The University of Texas at El Paso, El Paso, TX 79968, USA
2W.M. Keck Center for 3D Innovation, The University of Texas at El Paso, El Paso, TX 79968, USA

Received 22 March 2012; Accepted 29 June 2012

Academic Editor: Mohamed Rahaman

Copyright © 2012 Lawrence E. Murr et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Lawrence E. Murr, Sara M. Gaytan, Edwin Martinez, Frank Medina, and Ryan B. Wicker, “Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting,” International Journal of Biomaterials, vol. 2012, Article ID 245727, 14 pages, 2012. https://doi.org/10.1155/2012/245727.