Table of Contents Author Guidelines Submit a Manuscript
International Journal of Biomaterials
Volume 2014 (2014), Article ID 313975, 12 pages
http://dx.doi.org/10.1155/2014/313975
Research Article

Pore Geometry Optimization of Titanium (Ti6Al4V) Alloy, for Its Application in the Fabrication of Customized Hip Implants

1Department of Aerospace Engineering and Applied Mechanics, Indian Institute of Engineering Science and Technology, Shibpur 711103, India
2Department of Civil Engineering, Indian Institute of Engineering Science & Technology, Shibpur, West Bengal, India

Received 3 June 2014; Revised 9 August 2014; Accepted 16 September 2014; Published 21 October 2014

Academic Editor: Rosalind Labow

Copyright © 2014 Sandipan Roy et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Sandipan Roy, Debojyoti Panda, Niloy Khutia, and Amit Roy Chowdhury, “Pore Geometry Optimization of Titanium (Ti6Al4V) Alloy, for Its Application in the Fabrication of Customized Hip Implants,” International Journal of Biomaterials, vol. 2014, Article ID 313975, 12 pages, 2014. doi:10.1155/2014/313975