Table of Contents Author Guidelines Submit a Manuscript
International Journal of Biomaterials
Volume 2017, Article ID 5093063, 11 pages
https://doi.org/10.1155/2017/5093063
Research Article

Intrinsic Osteoinductivity of Porous Titanium Scaffold for Bone Tissue Engineering

1Institute of Orthopaedic & Musculoskeletal Science, University College London, Royal National Orthopaedic Hospital, Stanmore HA7 4LP, UK
2State Key Laboratory for Manufacturing System Engineering, Xi’an Jiaotong University, Xi’an, Shanxi Province 710049, China

Correspondence should be addressed to Chaozong Liu; ku.ca.lcu@uil.gnozoahC

Received 5 May 2017; Accepted 7 June 2017; Published 26 July 2017

Academic Editor: Kheng-Lim Goh

Copyright © 2017 Maryam Tamaddon et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. R. Porter, T. T. Ruckh, and K. C. Popat, “Bone tissue engineering: a review in bone biomimetics and drug delivery strategies,” Biotechnology Progress, vol. 25, no. 6, pp. 1539–1560, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. P. Lichte, H. C. Pape, T. Pufe, P. Kobbe, and H. Fischer, “Scaffolds for bone healing: concepts, materials and evidence,” Injury, vol. 42, no. 6, pp. 569–573, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. V. Karageorgiou and D. Kaplan, “Porosity of 3D biomaterial scaffolds and osteogenesis,” Biomaterials, vol. 26, no. 27, pp. 5474–5491, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. P. Leng, Y.-Z. Wang, and H.-N. Zhang, “Repair of large osteochondral defects with mix-mosaicplasty in a goat model,” Orthopedics, vol. 36, no. 3, pp. e331–e336, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. V. I. Sikavitsas, J. S. Temenoff, and A. G. Mikos, “Biomaterials and bone mechanotransduction,” Biomaterials, vol. 22, no. 19, pp. 2581–2593, 2001. View at Publisher · View at Google Scholar · View at Scopus
  6. H. Petite, K. Vandamme, L. Monfoulet, and D. Logeart-Avramoglou, “Strategies for improving the efficacy of bioengineered bone constructs: A perspective,” Osteoporosis International, vol. 22, no. 6, pp. 2017–2021, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. A. K. Lynn, R. A. Brooks, W. Bonfield, and N. Rushton, “Repair of defects in articular joints. Prospects for material-based solutions in tissue engineering,” Journal of Bone and Joint Surgery - Series B, vol. 86, no. 8, pp. 1093–1099, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. T. Aigner and J. Stöve, “Collagens - Major component of the physiological cartilage matrix, major target of cartilage degeneration, major tool in cartilage repair,” Advanced Drug Delivery Reviews, vol. 55, no. 12, pp. 1569–1593, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. E. B. Hunziker, “Articular cartilage repair: basic science and clinical progress. A review of the current status and prospects,” Osteoarthritis and Cartilage, vol. 10, no. 6, pp. 432–463, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Martino, F. D'Angelo, I. Armentano, J. M. Kenny, and A. Orlacchio, “Stem cell-biomaterial interactions for regenerative medicine,” Biotechnology Advances, vol. 30, no. 1, pp. 338–351, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. T. L. Livingston, S. Gordon, and M. Archambault, Mesenchymal stem cells combined with biphasic calcium phosphate ceramics promote bone regeneration, Chapman Hall, UK, 2003.
  12. T. Albrektsson and C. Johansson, “Osteoinduction, osteoconduction and osseointegration,” European Spine Journal, vol. 10, no. 2, pp. S96–S101, 2001. View at Publisher · View at Google Scholar · View at Scopus
  13. J. S. Temenoff and A. G. Mikos, “Review: Tissue engineering for regeneration of articular cartilage,” Biomaterials, vol. 21, no. 5, pp. 431–440, 2000. View at Publisher · View at Google Scholar · View at Scopus
  14. D. Hutmacher, “Scaffolds in tissue engineering bone and cartilage,” Biomaterials, vol. 21, no. 24, pp. 2529–2543, 2000. View at Publisher · View at Google Scholar · View at Scopus
  15. E. S. Place, N. D. Evans, and M. M. Stevens, “Complexity in biomaterials for tissue engineering,” Nature Materials, vol. 8, no. 6, pp. 457–470, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. A. Yousefi, M. E. Hoque, R. G. Prasad, and N. Uth, “Current strategies in multiphasic scaffold design for osteochondral tissue engineering: a review,” Journal of Biomedical Materials Research Part A, vol. 103, no. 7, pp. 2460–2481, 2014. View at Publisher · View at Google Scholar
  17. P. B. Malafaya, G. A. Silva, and R. L. Reis, “Natural-origin polymers as carriers and scaffolds for biomolecules and cell delivery in tissue engineering applications,” Advanced Drug Delivery Reviews, vol. 59, no. 4-5, pp. 207–233, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. M. Chen, D. Q. S. Le, A. Baatrup et al., “Self-assembled composite matrix in a hierarchical 3-D scaffold for bone tissue engineering,” Acta Biomaterialia, vol. 7, no. 5, pp. 2244–2255, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. B. Dabrowski, W. Swieszkowski, D. Godlinski, and K. J. Kurzydlowski, “Highly porous titanium scaffolds for orthopaedic applications,” Journal of Biomedical Materials Research Part B Applied Biomaterials, vol. 95, no. 1, pp. 53–61, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. Wang, Y. Shen, Z. Wang, J. Yang, N. Liu, and W. Huang, “Development of highly porous titanium scaffolds by selective laser melting,” Materials Letters, vol. 64, no. 6, pp. 674–676, 2010. View at Publisher · View at Google Scholar · View at Scopus
  21. M. A. Lopez-Heredia, J. Sohier, C. Gaillard, S. Quillard, M. Dorget, and P. Layrolle, “Rapid prototyped porous titanium coated with calcium phosphate as a scaffold for bone tissue engineering,” Biomaterials, vol. 29, no. 17, pp. 2608–2615, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. G. E. Ryan, A. S. Pandit, and D. P. Apatsidis, “Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique,” Biomaterials, vol. 29, no. 27, pp. 3625–3635, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. K. Alvarez and H. Nakajima, “Metallic scaffolds for bone regeneration,” Materials, vol. 2, no. 3, pp. 790–832, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. P. H. Warnke, T. Douglas, P. Wollny et al., “Rapid prototyping: Porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering,” Tissue Engineering - Part C: Methods, vol. 15, no. 2, pp. 115–124, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. W. Xue, B. V. Krishna, A. Bandyopadhyay, and S. Bose, “Processing and biocompatibility evaluation of laser processed porous titanium,” Acta Biomaterialia, vol. 3, no. 6, pp. 1007–1018, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. L. Mullen, R. C. Stamp, W. K. Brooks, E. Jones, and C. J. Sutcliffe, “Selective laser melting: a regular unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications,” Journal of Biomedical Materials Research Part B Applied Biomaterials, vol. 89, no. 2, pp. 325–334, 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. F. Mangano, L. Chambrone, R. van Noort, C. Miller, P. Hatton, and C. Mangano, “Direct metal laser sintering titanium dental implants: a review of the current literature,” International Journal of Biomaterials, vol. 2014, Article ID 461534, 11 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Fujibayashi, M. Neo, H.-M. Kim, T. Kokubo, and T. Nakamura, “Osteoinduction of porous bioactive titanium metal,” Biomaterials, vol. 25, no. 3, pp. 443–450, 2004. View at Publisher · View at Google Scholar · View at Scopus
  29. A. Fukuda, M. Takemoto, and T. Saito, “Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting,” Acta Biomaterialia, vol. 7, no. 5, pp. 2327–2336, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. E. García-Gareta, J. Hua, J. C. Knowles, and G. W. Blunn, “Comparison of mesenchymal stem cell proliferation and differentiation between biomimetic and electrochemical coatings on different topographic surfaces,” Journal of Materials Science: Materials in Medicine, vol. 24, no. 1, pp. 199–210, 2013. View at Publisher · View at Google Scholar · View at Scopus
  31. J. P. Collier, V. A. Surprenant, M. B. Mayor, M. Wrona, R. E. Jensen, and H. P. Surprenant, “Loss of hydroxyapatite coating on retrieved, total hip components,” The Journal of Arthroplasty, vol. 8, no. 4, pp. 389–393, 1993. View at Publisher · View at Google Scholar
  32. O. Reikerås and R. B. Gunderson, “Failure of HA coating on a gritblasted acetabular cup 155 patients followed for 7-10 years,” Acta Orthopaedica Scandinavica, vol. 73, no. 1, pp. 104–108, 2002. View at Publisher · View at Google Scholar · View at Scopus
  33. F. A. Shah, M. Trobos, P. Thomsen, and A. Palmquist, “Commercially pure titanium (cp-Ti) versus titanium alloy (Ti6Al4V) materials as bone anchored implants - Is one truly better than the other?” Materials Science and Engineering C, vol. 62, pp. 960–966, 2016. View at Publisher · View at Google Scholar · View at Scopus
  34. L. A. Crawford, E. S. Powell, and I. A. Trail, “The fixation strength of scaphoid bone screws: An in vitro investigation using polyurethane foam,” Journal of Hand Surgery, vol. 37, no. 2, pp. 255–260, 2012. View at Publisher · View at Google Scholar · View at Scopus
  35. W. Suchanek and M. Yoshimura, “Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants,” Journal of Materials Research, vol. 13, pp. 94–117, 1998. View at Publisher · View at Google Scholar
  36. L. J. Gibson, “The mechanical behaviour of cancellous bone,” Journal of Biomechanics, vol. 18, no. 5, pp. 317–328, 1985. View at Publisher · View at Google Scholar · View at Scopus
  37. M. Martens, R. van Audekercke, P. Delport, P. de Meester, and J. C. Mulier, “The mechanical characteristics of cancellous bone at the upper femoral region,” Journal of Biomechanics, vol. 16, no. 12, pp. 971–983, 1983. View at Publisher · View at Google Scholar · View at Scopus
  38. B. Johnston, “High-strength fully porous biomaterials for bone replacement and their application to a total hip replacement,” in Department of Mechanical Engineering, McGill, Montreal, Canada, 2016. View at Google Scholar
  39. J. A. Grant, N. E. Bishop, N. Götzen, C. Sprecher, M. Honl, and M. M. Morlock, “Artificial composite bone as a model of human trabecular bone: The implant-bone interface,” Journal of Biomechanics, vol. 40, no. 5, pp. 1158–1164, 2007. View at Publisher · View at Google Scholar · View at Scopus
  40. C. Castellani, R. A. Lindtner, P. Hausbrandt et al., “Bone-implant interface strength and osseointegration: biodegradable magnesium alloy versus standard titanium control,” Acta Biomaterialia, vol. 7, no. 1, pp. 432–440, 2011. View at Publisher · View at Google Scholar · View at Scopus
  41. A. Barradas, H. Yuan, C. van Blitterswijk, and P. Habibovic, “Osteoinductive biomaterials: current knowledge of properties, experimental models and biological mechanisms,” European Cells and Materials, vol. 21, pp. 407–429, 2011. View at Publisher · View at Google Scholar
  42. P. Habibovic, Properties and clinical relevance of osteoinductive biomaterials, University of Twente, 2005.