Table of Contents Author Guidelines Submit a Manuscript
International Journal of Biomaterials
Volume 2018, Article ID 2598073, 7 pages
https://doi.org/10.1155/2018/2598073
Research Article

Simplified Surface Treatments for Ceramic Cementation: Use of Universal Adhesive and Self-Etching Ceramic Primer

Restorative Dentistry, Brazilian Dental Association, Goiânia 74325-110, Brazil

Correspondence should be addressed to Ana Paula R. Magalhães; moc.liamg@mdraluapana

Received 20 November 2018; Revised 17 December 2018; Accepted 18 December 2018; Published 31 December 2018

Academic Editor: Wen-Cheng Chen

Copyright © 2018 Heloísa A. B. Guimarães et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. U. S. Beier, I. Kapferer, D. Burtscher, and H. Dumfahrt, “Clinical performance of porcelain laminate veneers for up to 20 years,” The International Journal of Prosthodontics, vol. 25, no. 1, pp. 79–85, 2012. View at Google Scholar · View at Scopus
  2. S. Pieger, A. Salman, and A. S. Bidra, “Clinical outcomes of lithium disilicate single crowns and partial fixed dental prostheses: a systematic review,” The Journal of Prosthetic Dentistry, vol. 112, no. 1, pp. 22–30, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. M. N. Aboushelib and D. Sleem, “Microtensile bond strength of lithium disilicate ceramics to resin adhesives,” The Journal of Adhesive Dentistry, vol. 16, no. 6, pp. 547–552, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. J. R. Almeida, G. U. Schmitt, M. R. Kaizer, N. Boscato, and R. R. Moraes, “Resin-based luting agents and color stability of bonded ceramic veneers,” Journal of Prosthetic Dentistry, vol. 114, no. 2, pp. 272–277, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. T. Tian, J. K.-H. Tsoi, J. P. Matinlinna, and M. F. Burrow, “Aspects of bonding between resin luting cements and glass ceramic materials,” Dental Materials, vol. 30, no. 7, pp. e147–e162, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. G. B. Guarda, A. B. Correr, L. S. Gonçalves et al., “Effects of surface treatments, thermocycling, and cyclic loading on the bond strength of a resin cement bonded to a lithium disilicate glass ceramic,” Operative Dentistry, vol. 38, no. 2, pp. 208–217, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Della Bona, K. J. Anusavice, and J. A. A. Hood, “Effect of ceramic surface treatment on tensile bond strength to a resin cement,” International Journal of Prosthodontics, vol. 15, no. 3, pp. 248–253, 2002. View at Google Scholar · View at Scopus
  8. R. C. R. Colares, J. R. Neri, A. M. B. de Souza, K. M. D. F. Pontes, J. S. Mendonça, and S. L. Santiago, “Effect of surface pretreatments on the microtensile bond strength of lithium-disilicate ceramic repaired with composite resin,” Brazilian Dental Journal, vol. 24, no. 4, pp. 349–352, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. G. M. Iorizzo, F. Prete, B. Mazzanti, G. Timellini, R. Scotti, and P. Baldissara, “Effects of hydrofluoric acid etching on lithium disilicate,” Dental Materials, vol. 30, p. e24, 2014. View at Publisher · View at Google Scholar
  10. P. Kursoglu, P. F. K. Motro, and H. Yurdaguven, “Shear bond strength of resin cement to an acid etched and a laser irradiated ceramic surface,” The Journal of Advanced Prosthodontics, vol. 5, no. 2, pp. 98–103, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. J. P. Matinlinna, C. Y. K. Lung, and J. K. H. Tsoi, “Silane adhesion mechanism in dental applications and surface treatments: a review,” Dental Materials, vol. 34, no. 1, pp. 13–28, 2018. View at Publisher · View at Google Scholar · View at Scopus
  12. D. P. Lise, J. Perdigão, A. Van Ende, O. Zidan, and G. C. Lopes, “Microshear bond strength of resin cements to lithium disilicate substrates as a function of surface preparation,” Operative Dentistry, vol. 40, no. 5, pp. 524–532, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. N. Scotti, G. Cavalli, M. Gagliani, and L. Breschi, “New adhesives and bonding techniques. Why and when?” The international journal of esthetic dentistry, vol. 12, no. 4, pp. 524–535, 2017. View at Google Scholar · View at Scopus
  14. H.-Y. Lee, G.-J. Han, J. Chang, and H.-H. Son, “Bonding of the silane containing multi-mode universal adhesive for lithium disilicate ceramics,” Restorative Dentistry & Endodontics, vol. 42, no. 2, pp. 95–104, 2017. View at Publisher · View at Google Scholar
  15. V. K. Kalavacharla, N. C. Lawson, L. C. Ramp, and J. O. Burgess, “Influence of etching protocol and silane treatment with a universal adhesive on lithium disilicate bond strength,” Operative Dentistry, vol. 40, no. 4, pp. 372–378, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Özcan, A. Allahbeickaraghi, and M. Dündar, “Possible hazardous effects of hydrofluoric acid and recommendations for treatment approach: A review,” Clinical Oral Investigations, vol. 16, no. 1, pp. 15–23, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. H. M. El-Damanhoury and M. D. Gaintantzopoulou, “Self-etching ceramic primer versus hydrofluoric acid etching: Etching efficacy and bonding performance,” Journal of Prosthodontic Research, vol. 62, no. 1, pp. 75–83, 2018. View at Publisher · View at Google Scholar · View at Scopus
  18. F. S. Siqueira, R. S. Alessi, A. F. Cardenas, C. Kose, S. C. Souza Pinto, and M. C. Bandeca, “New single-bottle ceramic primer: 6-month case report and laboratory performance,” The Journal of Contemporary Dental Practice, vol. 17, no. 12, pp. 1033–1039, 2016. View at Google Scholar
  19. J. L. Román-Rodríguez, J. A. Perez-Barquero, E. Gonzalez-Angulo, A. Fons-Font, and J. L. Bustos-Salvador, “Bonding to silicate ceramics: Conventional technique compared with a simplified technique,” Journal of Clinical and Experimental Dentistry, vol. 9, no. 3, pp. e384–e386, 2017. View at Publisher · View at Google Scholar
  20. J. Tribst, L. Anami, M. Özcan, M. Bottino, R. Melo, and G. Saavedra, “Self-etching Primers vs Acid Conditioning: Impact on Bond Strength Between Ceramics and Resin Cement,” Operative Dentistry, vol. 43, no. 4, pp. 372–379, 2018. View at Publisher · View at Google Scholar
  21. G. Lopes, J. Perdigão, D. Baptista, and A. Ballarin, “Does a Self-Etching Ceramic Primer Improve Bonding to Lithium Disilicate Ceramics? Bond Strengths and FESEM Analyses,” Operative Dentistry, 2018. View at Publisher · View at Google Scholar
  22. M. Prado, C. Prochnow, A. M. E. Marchionatti, P. Baldissara, L. F. Valandro, and V. F. Wandsher, “Ceramic surface treatment with a single-component primer: Resin adhesion to glass ceramics,” The Journal of Adhesive Dentistry, vol. 20, no. 2, pp. 99–105, 2018. View at Google Scholar
  23. C. M. Ramos, P. F. Cesar, R. F. Lia Mondelli, A. S. Tabata, J. De Souza Santos, and A. F. Sanches Borges, “Bond strength and Raman analysis of the zirconia-feldspathic porcelain interface,” Journal of Prosthetic Dentistry, vol. 112, no. 4, pp. 886–894, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. A. Attia and M. Kern, “Influence of cyclic loading and luting agents on the fracture load of two all-ceramic crown systems,” Journal of Prosthetic Dentistry, vol. 92, no. 6, pp. 551–556, 2004. View at Publisher · View at Google Scholar · View at Scopus
  25. C. P. Gré, R. C. de Ré Silveira, S. Shibata, C. T. R. Lago, and L. C. C. Vieira, “Effect of silanization on microtensile bond strength of different resin cements to a lithium disilicate glass ceramic,” Journal of Contemporary Dental Practice, vol. 17, no. 2, pp. 149–153, 2016. View at Publisher · View at Google Scholar · View at Scopus
  26. T. Yavuz and O. Eraslan, “The effect of silane applied to glass ceramics on surface structure and bonding strength at different temperatures,” The Journal of Advanced Prosthodontics, vol. 8, no. 2, pp. 75–84, 2016. View at Publisher · View at Google Scholar · View at Scopus
  27. C. S. Garboza, S. B. Berger, R. D. Guiraldo et al., “Influence of surface treatments and adhesive systems on lithium disilicate microshear bond strength,” Brazilian Dental Journal, vol. 27, no. 4, pp. 452–457, 2016. View at Publisher · View at Google Scholar · View at Scopus
  28. C. Chen, H. Xie, X. Song, M. F. Burrow, G. Chen, and F. Zhang, “Evaluation of a commercial primer for bonding of zirconia to two different resin composite cements,” The Journal of Adhesive Dentistry, vol. 16, no. 2, pp. 169–176, 2014. View at Google Scholar
  29. S. S. Scherrer, P. F. Cesar, and M. V. Swain, “Direct comparison of the bond strength results of the different test methods: a critical literature review,” Dental Materials, vol. 26, no. 2, pp. e78–e93, 2010. View at Publisher · View at Google Scholar · View at Scopus
  30. P. H. DeHoff, K. J. Anusavice, and Z. Wang, “Three-dimensional finite element analysis of the shear bond test,” Dental Materials, vol. 11, no. 2, pp. 126–131, 1995. View at Publisher · View at Google Scholar · View at Scopus
  31. A. M. Cardenas, F. Siqueira, V. Hass et al., “Effect of MDP-containing Silane and Adhesive Used Alone or in Combination on the Long-term Bond Strength and Chemical Interaction with Lithium Disilicate Ceramics,” The Journal of Adhesive Dentistry, vol. 19, no. 3, pp. 203–212, 2017. View at Google Scholar · View at Scopus
  32. A. F. Moro, A. B. Ramos, G. M. Rocha, and C. d. Perez, “Effect of prior silane application on the bond strength of a universal adhesive to a lithium disilicate ceramic,” The Journal of Prosthetic Dentistry, vol. 118, pp. 666–671, 2017. View at Publisher · View at Google Scholar
  33. F. Murillo-Gómez, F. A. Rueggeberg, and M. F. De Goes, “Short- and long-term bond strength between resin cement and glass-ceramic using a silane-containing universal adhesive,” Operative Dentistry, vol. 42, no. 5, pp. 514–525, 2017. View at Publisher · View at Google Scholar · View at Scopus
  34. S. K. Lyann, K. Takagaki, T. Nikaido, M. Uo, M. Ikeda, and A. Sadr, “Effect of different surface treatmens on the tensile bond strength to lithium disilicate ceramics,” The Journal of Adhesive Dentistry, vol. 20, no. 3, pp. 261–268, 2018. View at Google Scholar
  35. M. Ozcan and C. A. Volpato, “Surface conditioning protocol for the adhesion of resin-based materials to glassy matrix ceramics: How to condition and why?” The Journal of Adhesive Dentistry, vol. 17, pp. 292-293, 2015. View at Google Scholar
  36. J. L. Ferracane, “Resin composite—state of the art,” Dental Materials, vol. 27, no. 1, pp. 29–38, 2011. View at Publisher · View at Google Scholar · View at Scopus
  37. F. W. Machado, M. Bossardi, T. D. S. Ramos, L. L. Valente, E. A. Münchow, and E. Piva, “Application of resin adhesive on the surface of a silanized glass fiber-reinforced post and its effect on the retention to root dentin,” Journal of Endodontics, vol. 41, no. 1, pp. 106–110, 2015. View at Publisher · View at Google Scholar · View at Scopus
  38. R. R. Braga, J. B. C. Meira, L. C. C. Boaro, and T. A. Xavier, “Adhesion to tooth structure: a critical review of ‘macro’ test methods,” Dental Materials, vol. 26, no. 2, pp. e38–e49, 2010. View at Publisher · View at Google Scholar · View at Scopus
  39. M. A. C. Sinhoreti, S. Consani, M. F. De Goes, L. C. Sobrinho, and J. C. Knowles, “Influence of loading types on the shear strength of the dentin-resin interface bonding,” Journal of Materials Science: Materials in Medicine, vol. 12, no. 1, pp. 39–44, 2001. View at Publisher · View at Google Scholar · View at Scopus