Table of Contents Author Guidelines Submit a Manuscript
International Journal of Biomaterials
Volume 2019, Article ID 3806504, 21 pages
https://doi.org/10.1155/2019/3806504
Review Article

Surface Activation and Pretreatments for Biocompatible Metals and Alloys Used in Biomedical Applications

Department of Chemistry, University of North Texas, 1155 Union Circle #30507, Denton, TX 76203, USA

Correspondence should be addressed to Teresa D. Golden; ude.tnu@nedlogt

Received 30 November 2018; Revised 21 April 2019; Accepted 7 May 2019; Published 2 June 2019

Academic Editor: Vijaya Kumar Rangari

Copyright © 2019 Vivian Huynh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. Kokubo, “Surface chemistry of bioactive glass-ceramics,” Journal of Non-Crystalline Solids, vol. 120, no. 1–3, pp. 138–151, 1990. View at Publisher · View at Google Scholar · View at Scopus
  2. M. P. Ferraz, F. J. Monteiro, and C. M. Manuel, “Hydroxyapatite nanoparticles: a review of preparation methodologies,” Journal of Applied Biomaterials & Functional Materials, vol. 2, pp. 74–80, 2004. View at Google Scholar
  3. M. Ascencio, M. Pekguleryuz, and S. Omanovic, “An investigation of the corrosion mechanisms of WE43Mg alloy in a modified simulated body fluid solution: The effect of electrolyte renewal,” Corrosion Science, vol. 91, pp. 297–310, 2015. View at Publisher · View at Google Scholar
  4. X. Zhao, L. Yang, Y. Zuo, and J. Xiong, “Hydroxyapatite coatings on titanium prepared by electrodeposition in a modified simulated body fluid,” Chinese Journal of Chemical Engineering, vol. 17, no. 4, pp. 667–671, 2009. View at Publisher · View at Google Scholar
  5. P. C. Rath, L. Besra, B. P. Singh, and S. Bhattacharjee, “Titania/hydroxyapatite bi-layer coating on Ti metal by electrophoretic deposition: Characterization and corrosion studies,” Ceramics International, vol. 38, no. 4, pp. 3209–3216, 2012. View at Publisher · View at Google Scholar
  6. M. Leena, D. Rana, T. J. Webster, and M. Ramalingam, “Accelerated synthesis of biomimetic nano hydroxyapatite using simulated body fluid,” Materials Chemistry and Physics, vol. 180, pp. 166–172, 2016. View at Publisher · View at Google Scholar
  7. N. Eliaz, S. Shmueli, I. Shur, D. Benayahu, D. Aronov, and G. Rosenman, “The effect of surface treatment on the surface texture and contact angle of electrochemically deposited hydroxyapatite coating and on its interaction with bone-forming cells,” Acta Biomaterialia, vol. 5, no. 8, pp. 3178–3191, 2009. View at Publisher · View at Google Scholar
  8. A. El Hadad, E. Peón, F. García-Galván et al., “Biocompatibility and corrosion protection behaviour of hydroxyapatite sol-gel-derived coatings on Ti6Al4V alloy,” Materials, vol. 10, no. 2, p. 94, 2017. View at Publisher · View at Google Scholar
  9. R. I. M. Asri, W. S. W. Harun, M. A. Hassan, S. A. C. Ghani, and Z. Buyong, “A review of hydroxyapatite-based coating techniques: Sol-gel and electrochemical depositions on biocompatible metals,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 57, pp. 95–108, 2016. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. Parcharoen, P. Kajitvichyanukul, S. Sirivisoot, and P. Termsuksawad, “Hydroxyapatite electrodeposition on anodized titanium nanotubes for orthopedic applications,” Applied Surface Science, vol. 311, pp. 54–61, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. G. Manivasagam, D. Dhinasekaran, and A. Rajamanickam, “Biomedical implants: corrosion and its prevention—a review,” Recent Patents on Corrosion Science, vol. 2, no. 1, pp. 40–54, 2010. View at Publisher · View at Google Scholar
  12. Q. Yuan, L. K. Sahu, N. A. D'Souza, and T. D. Golden, “Synthesis of hydroxyapatite coatings on metal substrates using a spincasting technique,” Materials Chemistry and Physics, vol. 116, no. 2-3, pp. 523–526, 2009. View at Publisher · View at Google Scholar
  13. S. Kannan, A. Balamurugan, and S. Rajeswari, “H2SO4 as a passivating medium on the localised corrosion resistance of surgical 316L SS metallic implant and its effect on hydroxyapatite coatings,” Electrochimica Acta, vol. 49, no. 15, pp. 2395–2403, 2004. View at Publisher · View at Google Scholar
  14. J. E. Gray-Munro and M. Strong, “The mechanism of deposition of calcium phosphate coatings from solution onto magnesium alloy AZ31,” Journal of Biomedical Materials Research Part A, vol. 90, no. 2, pp. 339–350, 2009. View at Publisher · View at Google Scholar
  15. Q. Yuan and T. D. Golden, “Electrochemical study of hydroxyapatite coatings on stainless steel substrates,” Thin Solid Films, vol. 518, no. 1, pp. 55–60, 2009. View at Publisher · View at Google Scholar
  16. J. E. Gray-Munro, C. Seguin, and M. Strong, “Influence of surface modification on the in vitro corrosion rate of magnesium alloy AZ31,” Journal of Biomedical Materials Research Part A, vol. 91, no. 1, pp. 221–230, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. K. H. Park, S. Kim, M. Hwang, H. Song, and Y. Park, “Pulse electrodeposition of hydroxyapatite/chitosan coatings on titanium substrate for dental implant,” Colloid and Polymer Science, vol. 295, no. 10, pp. 1843–1849, 2017. View at Publisher · View at Google Scholar
  18. M. İ. Coşkun, İ. H. Karahan, Y. Yücel, and T. D. Golden, “Computer-assisted optimization of electrodeposited hydroxyapatite coating parameters on medical alloys,” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 47, no. 4, pp. 1828–1841, 2016. View at Publisher · View at Google Scholar
  19. K. Grandfield, A. Palmquist, S. Gonçalves et al., “Free form fabricated features on CoCr implants with and without hydroxyapatite coating in vivo: a comparative study of bone contact and bone growth induction,” Journal of Materials Science: Materials in Medicine, vol. 22, no. 4, pp. 899–906, 2011. View at Publisher · View at Google Scholar
  20. A. Kar, K. S. Raja, and M. Misra, “Electrodeposition of hydroxyapatite onto nanotubular TiO2 for implant applications,” Surface and Coatings Technology, vol. 201, no. 6, pp. 3723–3731, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. A. V. Zavgorodniy, O. Borrero-López, M. Hoffman, R. Z. LeGeros, and R. Rohanizadeh, “Mechanical stability of two-step chemically deposited hydroxyapatite coating on Ti substrate: Effects of various surface pretreatments,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 99, no. 1, pp. 58–69, 2011. View at Publisher · View at Google Scholar
  22. M. Geetha, A. K. Singh, R. Asokamani, and A. K. Gogia, “Ti based biomaterials, the ultimate choice for orthopaedic implants—a review,” Progress in Materials Science, vol. 54, no. 3, pp. 397–425, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. G. Wang, J. Li, K. Lv et al., “Surface thermal oxidation on titanium implants to enhance osteogenic activity and in vivo osseointegration,” Scientific Reports, vol. 6, no. 1, pp. 1–13, 2016. View at Publisher · View at Google Scholar
  24. J. Park, Y. Kim, J. Jang, T. Kwon, Y. Bae, and J. Suh, “Effects of phosphoric acid treatment of titanium surfaces on surface properties, osteoblast response and removal of torque forces,” Acta Biomaterialia, vol. 6, no. 4, pp. 1661–1670, 2010. View at Publisher · View at Google Scholar
  25. T. Hayakawa, M. Kawashita, and G. H. Takaoaka, “Coating of hydroxyapatite films on titanium substrates by electrodeposition under pulse current,” Journal of the Ceramic Society of Japan, vol. 116, no. 1349, pp. 68–73, 2008. View at Publisher · View at Google Scholar
  26. A. Nouri, P. D. Hodgson, and C. Wen, “Biomimetic porous titanium scaffolds for orthopedic and dental applications,” in Biomimetics Learning from Nature, pp. 415–451, InTech, 2010. View at Publisher · View at Google Scholar
  27. A. Yanovska, V. Kuznetsov, A. Stanislavov, S. Danilchenko, and L. Sukhodub, “Synthesis and characterization of hydroxyapatite-based coatings for medical implants obtained on chemically modified Ti6Al4V substrates,” Surface and Coatings Technology, vol. 205, no. 23-24, pp. 5324–5329, 2011. View at Publisher · View at Google Scholar
  28. M. Pan, X. Kong, Y. Cai, and J. Yao, “Hydroxyapatite coating on the titanium substrate modulated by a recombinant collagen-like protein,” Materials Chemistry and Physics, vol. 126, no. 3, pp. 811–817, 2011. View at Publisher · View at Google Scholar
  29. Y. Parcharoen, P. Termsuksawad, and S. Sirivisoot, “Improved bonding strength of hydroxyapatite on titanium dioxide nanotube arrays following alkaline pretreatment for orthopedic implants,” Journal of Nanomaterials, vol. 2016, Article ID 9143969, 13 pages, 2016. View at Publisher · View at Google Scholar
  30. D. M. Korotin, S. Bartkowski, E. Z. Kurmaev et al., “Surface characterization of titanium implants treated in hydrofluoric acid,” Journal of Biomaterials and Nanobiotechnology, vol. 3, no. 1, pp. 87–91, 2012. View at Publisher · View at Google Scholar
  31. M. Ueda, T. Kinoshita, M. Ikeda, and M. Ogawa, “Photo-induced formation of hydroxyapatite on TiO2 synthesized by a chemical–hydrothermal treatment,” Materials Science and Engineering C: Materials for Biological Applications, vol. 29, no. 7, pp. 2246–2249, 2009. View at Publisher · View at Google Scholar
  32. J. Park, Y. Lee, K. Kim, and K. Kim, “Bioactive calcium phosphate coating prepared on H2O2-treated titanium substrate by electrodeposition,” Surface and Coatings Technology, vol. 195, no. 2-3, pp. 252–257, 2005. View at Publisher · View at Google Scholar
  33. C. Yao, J. Lu, and T. J. Webster, “2 - Titanium and cobalt–chromium alloys for hips and knees,” Biomaterials & Artificial Organs, pp. 34–55, 2011. View at Publisher · View at Google Scholar
  34. M. Vera, Á. Colaccio, M. Rosenberger, C. Schvezov, and A. Ares, “Influence of the electrolyte concentration on the smooth TiO2 anodic coatings on Ti-6Al-4V,” Coatings, vol. 7, no. 3, pp. 39–11, 2017. View at Publisher · View at Google Scholar
  35. Z. X. Chen, Y. Takao, W. X. Wang, T. Matsubara, and L. M. Ren, “Surface characteristics and in vitro biocompatibility of titanium anodized in a phosphoric acid solution at different voltages,” Biomedical Materials, vol. 4, no. 6, Article ID 065003, pp. 1–8, 2009. View at Publisher · View at Google Scholar · View at Scopus
  36. L. Wang, M. Jin, Y. Zheng, Y. Guan, X. Lu, and J. Luo, “Nanotubular surface modification of metallic implants via electrochemical anodization technique,” International Journal of Nanomedicine, vol. 9, pp. 4421–4435, 2014. View at Publisher · View at Google Scholar
  37. Y. Yan, X. Zhang, Y. Huang, Q. Ding, and X. Pang, “Antibacterial and bioactivity of silver substituted hydroxyapatite/TiO2 nanotube composite coatings on titanium,” Applied Surface Science, vol. 314, pp. 348–357, 2014. View at Publisher · View at Google Scholar
  38. M. Pisarek, A. Roguska, L. Marcon, and M. Andrzejczuk, “Biomimetic and electrodeposited calcium-phosphates coatings on Ti-formation, surface characterization, biological response,” in Biomedical Engineering, pp. 3–46, InTech, 2012. View at Google Scholar
  39. S. E. Kim, J. H. Lim, S. C. Lee, S. Nam, H. Kang, and J. Choi, “Anodically nanostructured titanium oxides for implant applications,” Electrochimica Acta, vol. 53, no. 14, pp. 4846–4851, 2008. View at Publisher · View at Google Scholar
  40. J. M. Macak, H. Tsuchiya, L. Taveira, S. Aldabergerova, and P. Schmuki, “Smooth anodic TiO2 nanotubes,” Angewandte Chemie International Edition, vol. 44, no. 45, pp. 7463–7465, 2005. View at Publisher · View at Google Scholar · View at Scopus
  41. Z. J. Liu, X. Zhong, J. Walton, and G. E. Thompson, “Anodic film growth of titanium oxide using the 3-electrode electrochemical technique: Effects of oxygen evolution and morphological characterizations,” Journal of The Electrochemical Society, vol. 163, no. 3, pp. E75–E82, 2016. View at Publisher · View at Google Scholar · View at Scopus
  42. G. Strnad, C. Petrovan, O. Russu, and L. Jakab-Farkas, “TiO2 nanostructured surfaces for biomedical applications developed by electrochemical anodization,” IOP Conference Series: Materials Science and Engineering, vol. 161, Article ID 012051, 2016. View at Publisher · View at Google Scholar
  43. U. Gbureck, A. Masten, J. Probst, and R. Thull, “Tribochemical structuring and coating of implant metal surfaces with titanium oxide and hydroxyapatite layers,” Materials Science and Engineering C: Materials for Biological Applications, vol. 23, no. 3, pp. 461–465, 2003. View at Publisher · View at Google Scholar
  44. J. C. Balza, D. Zujur, L. Gil et al., “Sandblasting as a surface modification technique on titanium alloys for biomedical applications: abrasive particle behavior,” IOP Conference Series: Materials Science and Engineering, vol. 45, Article ID 012004, 2013. View at Publisher · View at Google Scholar
  45. D. Wei, Q. Du, S. Guo et al., “Structures, bonding strength and in vitro bioactivity and cytotoxicity of electrochemically deposited bioactive nano-brushite coating/TiO2 nanotubes composited films on titanium,” Surface and Coatings Technology, vol. 340, pp. 93–102, 2018. View at Publisher · View at Google Scholar · View at Scopus
  46. N. K. Rasheed, K. A. Hubeater, and A. F. hmood, “Improvement of corrosion resistance of dental alloys in oral environment at different temperatures by laser irradiation,” Australian Journal of Basic and Applied Sciences, vol. 10, pp. 162–170, 2016. View at Google Scholar
  47. M. Finšgar, A. P. Uzunalić, J. Stergar, L. Gradišnik, and U. Maver, “Novel chitosan/diclofenac coatings on medical grade stainless steel for hip replacement applications,” Scientific Reports, vol. 6, no. 1, pp. 1–17, 2016. View at Publisher · View at Google Scholar
  48. P. Schmuki, H. Hildebrand, A. Friedrich, and S. Virtanen, “The composition of the boundary region of MnS inclusions in stainless steel and its relevance in triggering pitting corrosion,” Corrosion Science, vol. 47, no. 5, pp. 1239–1250, 2005. View at Publisher · View at Google Scholar
  49. J. S. Noh, N. J. Laycock, W. Gao, and D. B. Wells, “Effects of nitric acid passivation on the pitting resistance of 316 stainless steel,” Corrosion Science, vol. 42, no. 12, pp. 2069–2084, 2000. View at Publisher · View at Google Scholar · View at Scopus
  50. Z. Yang, B. Kan, J. Li, Y. Su, L. Qiao, and A. A. Volinsky, “Pitting initiation and propagation of x70 pipeline steel exposed to chloride-containing environments,” Materials, vol. 10, no. 9, pp. 1–14, 2017. View at Publisher · View at Google Scholar
  51. T. Brajkovi, I. Juraga, and V. Šimunovi, “Influence of surface treatment on corrosion resistance of Cr-Ni steel,” Engineering Review, vol. 33, no. 2, pp. 129–134, 2013. View at Google Scholar · View at Scopus
  52. F. Lin, Y. Hsu, S. Lin, and J. Sun, “The effect of Ca/P concentration and temperature of simulated body fluid on the growth of hydroxyapatite coating on alkali-treated 316L stainless steel,” Biomaterials, vol. 23, no. 19, pp. 4029–4038, 2002. View at Publisher · View at Google Scholar
  53. P. Peled and D. Itzhak, “The surface composition of sintered stainless steel containing noble alloying elements exposed to a H2SO4 environment,” Corrosion Science, vol. 32, no. 1, pp. 83–90, 1991. View at Publisher · View at Google Scholar
  54. K. Prabakaran and S. Rajeswari, “Electrochemical, SEM and XPS investigations on phosphoric acid treated surgical grade type 316L SS for biomedical applications,” Journal of Applied Electrochemistry, vol. 39, no. 6, pp. 887–897, 2009. View at Publisher · View at Google Scholar · View at Scopus
  55. D. Gopi, D. Rajeswari, S. Ramya et al., “Enhanced corrosion resistance of strontium hydroxyapatite coating on electron beam treated surgical grade stainless steel,” Applied Surface Science, vol. 286, pp. 83–90, 2013. View at Publisher · View at Google Scholar
  56. N. Kirkland, J. Lespagnol, N. Birbilis, and M. Staiger, “A survey of bio-corrosion rates of magnesium alloys,” Corrosion Science, vol. 52, no. 2, pp. 287–291, 2010. View at Publisher · View at Google Scholar
  57. R. Hedayati, S. M. Ahmadi, K. Lietaert et al., “Fatigue and quasi-static mechanical behavior of bio-degradable porous biomaterials based on magnesium alloys,” Journal of Biomedical Materials Research Part A, vol. 106, no. 7, pp. 1798–1811, 2018. View at Publisher · View at Google Scholar
  58. A. H. M. Sanchez, B. J. C. Luthringer, F. Feyerabend, and R. Willumeit, “Mg and Mg alloys: How comparable are in vitro and in vivo corrosion rates? A review,” Acta Biomaterialia, vol. 13, pp. 16–31, 2015. View at Publisher · View at Google Scholar · View at Scopus
  59. P. Tian and X. Liu, “Surface modification of biodegradable magnesium and its alloys for biomedical applications,” Regenerative Biomaterials, vol. 2, no. 2, pp. 135–151, 2015. View at Publisher · View at Google Scholar
  60. G. Song, “Control of biodegradation of biocompatable magnesium alloys,” Corrosion Science, vol. 49, no. 4, pp. 1696–1701, 2007. View at Publisher · View at Google Scholar · View at Scopus
  61. M. Tomozawa and S. Hiromoto, “Microstructure of hydroxyapatite- and octacalcium phosphate-coatings formed on magnesium by a hydrothermal treatment at various pH values,” Acta Materialia, vol. 59, no. 1, pp. 355–363, 2011. View at Publisher · View at Google Scholar
  62. L. Xu, F. Pan, G. Yu, L. Yang, E. Zhang, and K. Yang, “In vitro and in vivo evaluation of the surface bioactivity of a calcium phosphate coated magnesium alloy,” Biomaterials, vol. 30, no. 8, pp. 1512–1523, 2009. View at Publisher · View at Google Scholar · View at Scopus
  63. Z. Grubač, M. Metikoš-Huković, and R. Babić, “Electrocrystallization, growth and characterization of calcium phosphate ceramics on magnesium alloys,” Electrochimica Acta, vol. 109, pp. 694–700, 2013. View at Publisher · View at Google Scholar
  64. X. N. Gu, W. Zheng, Y. Cheng, and Y. F. Zheng, “A study on alkaline heat treated Mg-Ca alloy for the control of the biocorrosion rate,” Acta Biomaterialia, vol. 5, no. 7, pp. 2790–2799, 2009. View at Publisher · View at Google Scholar · View at Scopus
  65. L. Li, J. Gao, and Y. Wang, “Evaluation of cyto-toxicity and corrosion behavior of alkali-heat-treated magnesium in simulated body fluid,” Surface and Coatings Technology, vol. 185, no. 1, pp. 92–98, 2004. View at Publisher · View at Google Scholar · View at Scopus
  66. H. Wang, S. Zhu, L. Wang, Y. Feng, X. Ma, and S. Guan, “Formation mechanism of Ca-deficient hydroxyapatite coating on Mg–Zn–Ca alloy for orthopaedic implant,” Applied Surface Science, vol. 307, pp. 92–100, 2014. View at Publisher · View at Google Scholar
  67. M. Pereda, C. Alonso, L. Burgos-Asperilla et al., “Corrosion inhibition of powder metallurgy Mg by fluoride treatments,” Acta Biomaterialia, vol. 6, no. 5, pp. 1772–1782, 2010. View at Publisher · View at Google Scholar
  68. B. Zhu, S. Wang, L. Wang, Y. Yang, J. Liang, and B. Cao, “Preparation of hydroxyapatite/tannic acid coating to enhance the corrosion resistance and cytocompatibility of AZ31 magnesium alloys,” Coatings, vol. 7, no. 7, p. 105, 2017. View at Publisher · View at Google Scholar
  69. S. A. Salman and M. Okido, “8 - Anodization of magnesium (Mg) alloys to improve corrosion resistance,” in Corrosion Prevention of Magnesium Alloys, pp. 197–231, Woodhead Publishing Limited, 2013. View at Publisher · View at Google Scholar
  70. T. S. N. S. Narayanan, I. S. Park, and M. H. Lee, “Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: prospects and challenges,” Progress in Materials Science, vol. 60, no. 1, pp. 1–71, 2014. View at Publisher · View at Google Scholar · View at Scopus
  71. X. Gu, N. Li, W. Zhou et al., “Corrosion resistance and surface biocompatibility of a microarc oxidation coating on a Mg–Ca alloy,” Acta Biomaterialia, vol. 7, no. 4, pp. 1880–1889, 2011. View at Publisher · View at Google Scholar
  72. Y. M. Wang, F. H. Wang, M. J. Xu, B. Zhao, L. X. Guo, and J. H. Ouyang, “Microstructure and corrosion behavior of coated AZ91 alloy by microarc oxidation for biomedical application,” Applied Surface Science, vol. 255, no. 22, pp. 9124–9131, 2009. View at Publisher · View at Google Scholar · View at Scopus
  73. X. P. Zhang, Z. P. Zhao, F. M. Wu, Y. L. Wang, and J. Wu, “Corrosion and wear resistance of AZ91D magnesium alloy with and without microarc oxidation coating in Hank's solution,” Journal of Materials Science, vol. 42, no. 20, pp. 8523–8528, 2007. View at Publisher · View at Google Scholar · View at Scopus
  74. M. F. F. A. Hamidi, W. S. W. Harun, M. Samykano et al., “A review of biocompatible metal injection moulding process parameters for biomedical applications,” Materials Science and Engineering C: Materials for Biological Applications, vol. 78, pp. 1263–1276, 2017. View at Publisher · View at Google Scholar · View at Scopus
  75. M. İbrahim Coşkun, İ. H. Karahan, Y. Yücel, and T. D. Golden, “Optimization of electrochemical step deposition for bioceramic hydroxyapatite coatings on CoCrMo implants,” Surface and Coatings Technology, vol. 301, pp. 42–53, 2016. View at Publisher · View at Google Scholar · View at Scopus
  76. B. Qian, K. Saeidi, L. Kvetková, F. Lofaj, C. Xiao, and Z. Shen, “Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting,” Dental Materials, vol. 31, no. 12, pp. 1435–1444, 2015. View at Publisher · View at Google Scholar
  77. M. Coşkun, İ. H. Karahan, and Y. Yücel, “Optimized electrodeposition concentrations for hydroxyapatite coatings on CoCrMo biomedical alloys by computational techniques,” Electrochimica Acta, vol. 150, pp. 46–54, 2014. View at Publisher · View at Google Scholar
  78. M. T. Mathew, M. J. Runa, M. Laurent, J. J. Jacobs, L. A. Rocha, and M. A. Wimmer, “Tribocorrosion behavior of CoCrMo alloy for hip prosthesis as a function of loads: A comparison between two testing systems,” Wear, vol. 271, no. 9-10, pp. 1210–1219, 2011. View at Publisher · View at Google Scholar · View at Scopus
  79. M. I. Coşkun, I. H. Karahan, and T. D. Golden, “Computer assisted corrosion analysis of hydroxyapatite coated CoCrMo biomedical alloys,” Surface and Coatings Technology, vol. 275, pp. e1–e9, 2015. View at Publisher · View at Google Scholar · View at Scopus
  80. S. Hamtaipour, S. Izman, and H. Hessam, “Evaluating the effect of pretreatment parameters on Co-Cr-Mo alloy prior to physical vapor deposition coating,” Jurnal Mekanikal, vol. 36, pp. 34–41, 2013. View at Google Scholar
  81. S. Izman, M. A. Hassan, M. R. Kadir et al., “Effect of pretreatment process on thermal oxidation of biomedical grade cobalt based alloy,” Advanced Materials Research, vol. 399-401, pp. 1564–1567, 2011. View at Publisher · View at Google Scholar
  82. L. Wang and J. Luo, “Preparation of hydroxyapatite coating on CoCrMo implant using an effective electrochemically-assisted deposition pretreatment,” Materials Characterization, vol. 62, no. 11, pp. 1076–1086, 2011. View at Publisher · View at Google Scholar
  83. M. Jin, S. Yao, L. Wang, Y. Qiao, and A. A. Volinsky, “Enhanced bond strength and bioactivity of interconnected 3D TiO2 nanoporous layer on titanium implants,” Surface and Coatings Technology, vol. 304, pp. 459–467, 2016. View at Publisher · View at Google Scholar
  84. Y. Wang, J. Tao, L. Wang, P. He, and T. Wang, “HA coating on titanium with nanotubular anodized TiO2 intermediate layer via electrochemical deposition,” Transactions of Nonferrous Metals Society of China, vol. 18, no. 3, pp. 631–635, 2008. View at Publisher · View at Google Scholar
  85. H. M. Ayu, S. Izman, R. Daud et al., “Surface modification on CoCrMo alloy to improve the adhesion strength of hydroxyapatite coating,” Procedia Engineering, vol. 184, pp. 399–408, 2017. View at Publisher · View at Google Scholar · View at Scopus
  86. B. Munirathinam, N. R. Jaladurgam, J. Magesh, R. Narayanan, J. M. Mol, and L. Neelakantan, “Improved corrosion protection of titanium implant material by crystallographic texturing of Sr doped calcium phosphate electrodeposits,” Thin Solid Films, vol. 675, pp. 115–121, 2019. View at Publisher · View at Google Scholar
  87. G. Ciobanu and M. Harja, “Cerium-doped hydroxyapatite/collagen coatings on titanium for bone implants,” Ceramics International, vol. 45, no. 2, pp. 2852–2857, 2019. View at Publisher · View at Google Scholar
  88. E. Hryha, E. Dudrova, and L. Nyborg, “On-line control of processing atmospheres for proper sintering of oxidation-sensitive PM steels,” Journal of Materials Processing Technology, vol. 212, no. 4, pp. 977–987, 2012. View at Publisher · View at Google Scholar
  89. Y.-L. Kuo and K. Kakehi, “Influence of powder surface contamination in the Ni-based superalloy alloy718 fabricated by selective laser melting and hot isostatic pressing,” Metals, vol. 7, no. 9, pp. 1–13, 2017. View at Google Scholar · View at Scopus
  90. S. Nagarajan and N. Rajendran, “Surface characterisation and electrochemical behaviour of porous titanium dioxide coated 316L stainless steel for orthopaedic applications,” Applied Surface Science, vol. 255, no. 7, pp. 3927–3932, 2009. View at Publisher · View at Google Scholar
  91. M. Poorraeisi and A. Afshar, “Synthesizing and comparing HA–TiO2 and HA–ZrO2 nanocomposite coatings on 316 stainless steel,” SN Applied Sciences, vol. 1, no. 2, article no. 155, 2019. View at Publisher · View at Google Scholar
  92. R. L. Teixeira, G. C. Godoy, and M. d. Pereira, “Calcium phosphate formation on alkali-treated titanium alloy and stainless steel,” Materials Research, vol. 7, no. 2, pp. 299–303, 2004. View at Publisher · View at Google Scholar
  93. R. I. M. Asri, W. S. W. Harun, M. Samykano et al., “Corrosion and surface modification on biocompatible metals: a review,” Materials Science and Engineering C: Materials for Biological Applications, vol. 77, pp. 1261–1274, 2017. View at Publisher · View at Google Scholar · View at Scopus
  94. W. Yu, R. Sun, Z. Guo et al., “Novel fluoridated hydroxyapatite/MAO composite coating on AZ31B magnesium alloy for biomedical application,” Applied Surface Science, vol. 464, pp. 708–715, 2019. View at Publisher · View at Google Scholar
  95. P. Zhang and Y. Zuo, “Relationship between porosity, pore parameters and properties of microarc oxidation film on AZ91D magnesium alloy,” Results in Physics, vol. 12, pp. 2044–2054, 2019. View at Publisher · View at Google Scholar
  96. Y. Lin, S. Cai, S. Jiang et al., “Enhanced corrosion resistance and bonding strength of Mg substituted β-tricalcium phosphate/Mg(OH)2 composite coating on magnesium alloys via one-step hydrothermal method,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 90, pp. 547–555, 2019. View at Publisher · View at Google Scholar
  97. V. DeLeon and T. D. Golden, “Effect of electrochemical parameters on the morphology and Ca/P ratios of deposited apatite coatings on metal and alloy substrates,” Journal of The Electrochemical Society, vol. 33, pp. 43–50, 2011. View at Google Scholar · View at Scopus
  98. M. C. Kuo and S. K. Yen, “The process of electrochemical deposited hydroxyapatite coatings on biomedical titanium at room temperature,” Materials Science and Engineering C: Materials for Biological Applications, vol. 20, no. 1-2, pp. 153–160, 2002. View at Publisher · View at Google Scholar · View at Scopus
  99. C. Wedemeyer, H. Jablonski, A. Mumdzic-Zverotic et al., “Laser-induced nanostructures on titanium surfaces ensure osseointegration of implants in rabbit femora,” Materialia, vol. 6, Article ID 100266, 2019. View at Publisher · View at Google Scholar
  100. M. R. Pantović Pavlović, S. G. Eraković, M. M. Pavlović, J. S. Stevanović, V. V. Panić, and N. L. Ignjatović, “Anaphoretical/oxidative approach to the in-situ synthesis of adherent hydroxyapatite/titanium oxide composite coatings on titanium,” Surface and Coatings Technology, vol. 358, pp. 688–694, 2019. View at Publisher · View at Google Scholar