Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2010, Article ID 412129, 7 pages
http://dx.doi.org/10.1155/2010/412129
Research Article

A Comparative Electrochemical Study of AZ31 and AZ91 Magnesium Alloy

1Department of Materials Science and Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
2Mining, Metallurgy and Petroleum Engineering Department, Faculty of Engineering, Al-Azhar University, Nasr City, Cairo 11371, Egypt
3Ecotopia Science Institute, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan

Received 8 October 2009; Revised 30 November 2009; Accepted 5 January 2010

Academic Editor: Jerzy A. Szpunar

Copyright © 2010 S. A. Salman et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [17 citations]

The following is the list of published articles that have cited the current article.

  • Yun-Il Choi, Salah Salman, K. Kuroda, and M. Okido, “Improvement in corrosion characteristics of AZ31 Mg alloy by square pulse anodizing between transpassive and active regions,” Corrosion Science, vol. 63, pp. 5–11, 2012. View at Publisher · View at Google Scholar
  • B. Reinhold, D. Bluecher, and M. Korte, “Challenge of joining and surface technologies for light weight constructions in automobile applications,” Materialwissenschaft Und Werkstofftechnik, vol. 44, no. 1, pp. 58–69, 2013. View at Publisher · View at Google Scholar
  • Zhan Yu, Dongying Ju, and Hongyang Zhao, “Effect of stress corrosion cracking at various strain rates on the electrochemical corrosion behavior of Mg-Zn-In-Sn alloy,” Journal of Environmental Sciences (China), vol. 25, no. 1, pp. S50–S53, 2013. View at Publisher · View at Google Scholar
  • Qiong Jiang, Qiang Miao, Fei Tong, Yi Xu, Bei-lei Ren, Zhi-mei Liu, and Zheng-jun Yao, “Electrochemical corrosion behavior of arc sprayed Al–Zn–Si–RE coatings on mild steel in 3.5% NaCl solution,” Transactions of Nonferrous Metals Society of China, vol. 24, no. 8, pp. 2713–2722, 2014. View at Publisher · View at Google Scholar
  • Y. Savguira, W. H. Liu, D. J. Miklas, T. H. North, and S. J. Thorpe, “Mass-Loss Testing in Magnesium AZ31 Friction Stir Spot Welds,” Corrosion, vol. 70, no. 8, pp. 858–866, 2014. View at Publisher · View at Google Scholar
  • Jianhong Dai, Yan Song, and Rui Yang, “Influences of alloying elements and oxygen on the stability and elastic properties of Mg17Al12,” Journal of Alloys and Compounds, vol. 595, pp. 142–147, 2014. View at Publisher · View at Google Scholar
  • Nv Nguyen Van Phuong, and Sungmo Moon, “The Effects of Surface Pre-Treatment Methods on the Structure and Corrosion Resistance of Zinc Phosphate Conversion Coatings on AZ31 Mg Alloy,” Science of Advanced Materials, vol. 6, no. 10, pp. 2210–2216, 2014. View at Publisher · View at Google Scholar
  • A. Castellanos, A. Altube, J.M. Vega, E. García-Lecina, J.A. Díez, and H.J. Grande, “Effect of different post-treatments on the corrosion resistance and tribological properties of AZ91D magnesium alloy coated PEO,” Surface and Coatings Technology, 2015. View at Publisher · View at Google Scholar
  • Emily K. Brooks, Menachem E. Tobias, Shuying Yang, Lawrence B. Bone, and Mark T. Ehrensberger, “Influence of MC3T3-E1 preosteoblast culture on the corrosion of a T6-treated AZ91 alloy,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2015. View at Publisher · View at Google Scholar
  • D. Dzhurinskiy, V. Leshchinsky, E. Strumban, E. Maeva, and R. G. Maev, “Protective coatings for mechanical aluminum-magnesium joints,” Surface Engineering, vol. 31, no. 10, pp. 740–746, 2015. View at Publisher · View at Google Scholar
  • Hualiang Huang, Guoan Zhang, Jiakuan Yang, Zhiquan Pan, and Xingpeng Guo, “Study of Flow-Assisted Corrosion of AZ91D Magnesium Alloy in Loop System Based on Array Electrode Technology,” Journal of Chemistry, vol. 2015, pp. 1–8, 2015. View at Publisher · View at Google Scholar
  • Han-Seung Lee, Jitendra Singh, Mohamed Ismail, and Chinmoy Bhattacharya, “Corrosion Resistance Properties of Aluminum Coating Applied by Arc Thermal Metal Spray in SAE J2334 Solution with Exposure Periods,” Metals, vol. 6, no. 3, pp. 55, 2016. View at Publisher · View at Google Scholar
  • Tso-Chang Wu, Yee-Hsien Ho, Sameehan S. Joshi, Ravi S. Rajamure, and Narendra B. Dahotre, “Microstructure and corrosion behavior of laser surface-treated AZ31B Mg bio-implant material,” Lasers in Medical Science, 2017. View at Publisher · View at Google Scholar
  • F.X. Wang, and B. Li, “Atomistic calculations of surface and interfacial energies of Mg17Al12–Mg system,” Journal of Magnesium and Alloys, 2018. View at Publisher · View at Google Scholar
  • Sennur Candan, and Ercan Candan, “Comparative study on corrosion behaviors of Mg-Al-Zn alloys,” Transactions of Nonferrous Metals Society of China, vol. 28, no. 4, pp. 642–650, 2018. View at Publisher · View at Google Scholar
  • Nguyen Van Phuong, Min-Sik Park, Chang Dong Yim, Bong Sun You, and Sungmo Moon, “Corrosion protection utilizing Ag layer on Cu coated AZ31 Mg alloy,” Corrosion Science, 2018. View at Publisher · View at Google Scholar
  • Fangxi Wang, and Bin Li, “Surface and Interfacial Energies of Mg17Al12–Mg System,” Magnesium Technology 2018, pp. 55–62, 2018. View at Publisher · View at Google Scholar