International Journal of Corrosion

Research Article

Corrosion Behavior of Fe40Al Alloy with Additions of Ti, Ag, and Cr in Molten KCl +

Table 3

Parameters used to simulate the EIS data for Fe-40Al-2.5Ti alloy.
Time (h) (Ohm cm2) (Ohm cm2) (Ohm cm−2s−n) (Ohm cm−2s−n) (Ohm cm2)
07.210.71.3 × 10−30.673.1 × 10−3 0.599057
59.246.85.6 × 10−30.432.5 × 10−30.514736
109.411.83.9 × 10−20.242.2 × 10−20.598016
151434.75.5 × 10−30.667.4 × 10−30.567784
201213.55.7 × 10−30.607.7 × 10−30.542369