Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2012 (2012), Article ID 368130, 8 pages
http://dx.doi.org/10.1155/2012/368130
Research Article

Evaluation of Corrosion Behavior of Galvanized Steel Treated with Conventional Conversion Coatings and a Chromate-Free Organic Inhibitor

1Faculty of Chemical Sciences, Universidad Autonoma de San Luis Potosi, Avenida Salvador Nava No. 6, 78290 San Luis Potosi, SLP, Mexico
2Institute of Metallurgy, Universidad Autonoma de San Luis Potosi, Avenida Sierra Leona No. 550, 78210 San Luis Potosi, SLP, Mexico
3Faculty of Engineering, Universidad Autonoma de San Luis Potosi, Avenida Salvador Nava No. 8, 78290 San Luis Potosi, SLP, Mexico

Received 1 June 2011; Accepted 29 August 2011

Academic Editor: Peter C. Okafor

Copyright © 2012 Laura A. Hernandez-Alvarado et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. X. G. Zhang, Corrosion and Electrochemistry of Zinc, Plenum Press, New York, NY, USA, 1996.
  2. J. F. McIntyre and R. J. Brent, “Tendencies of the pretreatment technology in next millennium,” Pinturas y Acabados Industriales, vol. 42, no. 261, pp. 36–44, 2000. View at Google Scholar
  3. R. G. Buchheit, S. B. Mamidipally, P. Schmutz, and H. Guan, “Active corrosion protection in Ce-modified hydrotalcite conversion coatings,” Corrosion, vol. 58, no. 1, pp. 3–14, 2002. View at Publisher · View at Google Scholar
  4. S. A. Furman, “Novel coating technology replaces chromate in zinc galvanizing process,” Materials Performance, vol. 49, no. 1, pp. 10–12, 2010. View at Google Scholar
  5. J. W. Bibber, “Chromium-free conversion coatings for zinc and its alloys,” Journal of Applied Surface Finishing, vol. 2, no. 4, pp. 273–275, 2009. View at Google Scholar
  6. T. Peng and R. Man, “Rare earth and silane as chromate replacers for corrosion protection on galvanized steel,” Journal of Rare Earths, vol. 27, no. 1, pp. 159–163, 2009. View at Publisher · View at Google Scholar
  7. A. D. King and J. R. Scully, “Sacrificial anode-based galvanic and barrier corrosion protection of 2024-T351 by a MG-rich primer and development of test methods for remaining life assessment,” Corrosion, vol. 67, no. 5, Article ID 055004, 22 pages, 2010. View at Publisher · View at Google Scholar
  8. M. G. Fontana, Corrosion Engineering, McGraw-Hill, Singapore, 3rd edition, 2008.
  9. M. Toga, P. Moyo, and D. J. Simbi, “Corrosion of galvanized steel in simulated mine water environments,” in Proceedings of the 15th International Corrosion Congress, paper 231, 9 pages, Granada, Spain, 2002.
  10. M. Sagiyama, A. Hiraya, and T. Watanabe, “Electrochemical behavior of electrodeposited zinc-iron alloys in 5%NaCl solution,” Journal of the Iron and Steel Institute of Japan, vol. 77, no. 2, pp. 244–250, 1991. View at Google Scholar
  11. R. L. Zeller and R. F. Savinell, “Interpretation of A.C. impedance response of chromated electrogalvanized steel,” Corrosion Science, vol. 26, no. 5, pp. 389–399, 1986. View at Google Scholar
  12. A. A. O. Magalhaes, I. C. P. Margarit, and O. R. Mattos, “Electrochemical characterization of chromate coatings on galvanized stell,” in Proceedings of the International Symposium on Electrochemical Impedance Spectroscopy (EIS '98), pp. 239–241, Rio de Janeiro, Brazil, 1998.
  13. F. Deflorian, V. B. Miskovic-Stankovic, P. L. Bonora, and L. Fedrizzi, “Degradation of epoxy coatings on phosphatized zinc-electroplated steel,” Corrosion, vol. 50, no. 6, pp. 438–446, 1994. View at Google Scholar
  14. C. Lin, T. Nguyen, and M. E. McKnight, “Relation between AC impedance data and degradation of coated steel. 1. Effects of surface roughness and contamination on the corrosion behavior of epoxy-coated steel,” Progress in Organic Coatings, vol. 20, no. 2, pp. 169–186, 1992. View at Google Scholar
  15. L. M. Callow and J. D. Scantlebury, “Electrochemical impedance on coated metal electrodes. Part1: Polarization effects,” JOCCA, vol. 64, no. 2, pp. 83–87, 1981. View at Google Scholar
  16. R. G. Buchheit and A. E. Hughes, “Chromate and chromate-free conversion coatings,” in Corrosion: Fundamentals, Testing and Protection, vol. 13A of ASM Handbook, pp. 720–35, ASM International, Materials Park, Ohio, USA, 2003. View at Google Scholar
  17. I. Suzuki, Corrosion-Resistant Coatings Technology, Marcel Dekker, New York, NY, USA, 1989.
  18. W. Zhang and R. G. Buchheit, “Effect of ambient aging on inhibition of oxygen reduction by chromate conversion coatings,” Corrosion, vol. 59, no. 4, pp. 356–362, 2003. View at Publisher · View at Google Scholar
  19. W. Feitknecht, “Studies on the influence of chemical factors on the corrosion of metals,” Chemistry and Industry, vol. 36, pp. 1101–1109, 1959. View at Google Scholar
  20. V. Kucera and E. Mattsson, “Atmospheric corrosion,” in Corrosion Mechanisms, F. Mansfeld, Ed., pp. 211–284, Marcel Dekker, New York, NY, USA, 1987. View at Google Scholar
  21. X. G. Zhang, Corrosion and Electrochemistry of Zinc, Plenum Press, New York, NY, USA, 1996.
  22. C. M. Rangel and L. F. Cruz, “Zinc dissolution in lisbon tap water,” Corrosion Science, vol. 33, no. 9, pp. 1479–1493, 1992. View at Publisher · View at Google Scholar
  23. V. Barranco, S. Feliu Jr., and S. Feliu, “EIS study of the corrosion behaviour of zinc-based coatings on steel in quiescent 3% NaCl solution. Part 1: directly exposed coatings,” Corrosion Science, vol. 46, no. 9, pp. 2203–2220, 2004. View at Publisher · View at Google Scholar