Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2012 (2012), Article ID 380217, 15 pages
http://dx.doi.org/10.1155/2012/380217
Review Article

Green Inhibitors for Corrosion Protection of Metals and Alloys: An Overview

Surface Engineering Division, CSIR-National Aerospace Laboratories, Bangalore 560037, India

Received 31 March 2011; Revised 17 June 2011; Accepted 17 June 2011

Academic Editor: Ali Y. El-Etre

Copyright © 2012 B. E. Amitha Rani and Bharathi Bai J. Basu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Bouklah, B. Hammouti, T. Benhadda, and M. Benkadour, “Thiophene derivatives as effective inhibitors for the corrosion of steel in 0.5 M H2SO4,” Journal of Applied Electrochemistry, vol. 35, no. 11, pp. 1095–1101, 2005. View at Google Scholar
  2. A. S. Fouda, A. A. Al-Sarawy, and E. E. El-Katori, “Pyrazolone derivatives as corrosion inhibitors for C-steel HCl solution,” Desalination, vol. 201, pp. 1–13, 2006. View at Google Scholar
  3. A. Fiala, A. Chibani, A. Darchen, A. Boulkamh, and K. Djebbar, “Investigations of the inhibition of copper corrosion in nitric acid solutions by ketene dithioacetal derivatives,” Applied Surface Science, vol. 253, no. 24, pp. 9347–9356, 2007. View at Google Scholar
  4. U. R. Evans, The Corrosion and Oxidation of Metals, Hodder Arnold, 1976.
  5. O. K. Abiola, N. C. Oforka, E. E. Ebenso, and N. M. Nwinuka, “Eco-friendly corrosion inhibitors: The inhibitive action of Delonix Regia extract for the corrosion of aluminium in acidic media,” Anti-Corrosion Methods and Materials, vol. 54, no. 4, pp. 219–224, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Kliskic, J. Radoservic, S. Gudic, and V. Katalinic, “Aqueous extract of Rosmarinus officinalis L. as inhibitor of Al-Mg alloy corrosion in chloride solution,” Journal of Applied Electrochemistry, vol. 30, no. 7, pp. 823–830, 2000. View at Google Scholar
  7. A. Y. El-Etre, “Natural honey as corrosion inhibitor for metals and alloys. I. Copper in neutral aqueous solution,” Corrosion Science, vol. 40, no. 11, pp. 1845–1850, 1998. View at Google Scholar
  8. A. Y. El-Etre, “Inhibition of aluminum corrosion using Opuntia extract,” Corrosion Science, vol. 45, no. 11, pp. 2485–2495, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. A. Y. El-Etre, “Khillah extract as inhibitor for acid corrosion of SX 316 steel,” Applied Surface Science, vol. 252, no. 24, pp. 8521–8525, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. E. E. Ebenso, U. J. Ibok, U. J. Ekpe et al., “Corrosion inhibition studies of some plant extracts on aluminium in acidic medium,” Transactions of the SAEST, vol. 39, no. 4, pp. 117–123, 2004. View at Google Scholar · View at Scopus
  11. E. E. Ebenso and U. J. Ekpe, “Kinetic study of corrosion and corrosion inhibition of mild steel in H2SO4 using Parica papaya leaves extract,” West African Journal of Biological and Applied Chemistry, vol. 41, pp. 21–27, 1996. View at Google Scholar
  12. U. J. Ekpe, E. E. Ebenso, and U. J. Ibok, “Inhibitory action of Azadirachta indica leaves extract on the corrosion of mild steel in H2SO4,” West African Journal of Biological and Applied Chemistry, vol. 37, pp. 13–30, 1994. View at Google Scholar
  13. F. Zucchi and I. H. Omar, “Plant extracts as corrosion inhibitors of mild steel in HCl solutions,” Surface Technology, vol. 24, no. 4, pp. 391–399, 1985. View at Google Scholar · View at Scopus
  14. S. A. Umoren, O. Ogbobe, I. O. Igwe, and E. E. Ebenso, “Inhibition of mild steel corrosion in acidic medium using synthetic and naturally occurring polymers and synergistic halide additives,” Corrosion Science, vol. 50, no. 7, pp. 1998–2006, 2008. View at Publisher · View at Google Scholar
  15. Y. J. Yee, Green inhibitors for corrosion control: a Study on the inhibitive effects of extracts of honey and rosmarinus officinalis L. (Rosemary), M.S. thesis, University of Manchester, Institute of Science and Technology, 2004.
  16. J. C. Chalchat, R. P. Garry, A. Michet, B. Benjilali, and J. L. Chabart, “Essential oils of Rosemary (Rosmarinus officinalis L.). The chemical composition of oils of various origins (Morocco, Spain, France),” Journal of Essential Oil Research, vol. 5, no. 6, pp. 613–618, 1993. View at Google Scholar
  17. E. El Ouariachi, J. Paolini, M. Bouklah et al., “Adsorption properties of Rosmarinus of ficinalis oil as green corrosion inhibitors on C38 steel in 0.5 M H2SO4,” Acta Metallurgica Sinica, vol. 23, no. 1, pp. 13–20, 2010. View at Google Scholar · View at Scopus
  18. A. O. Odiongenyi, S. A. Odoemelam, and N. O. Eddy, “Corrosion inhibition and adsorption properties of ethanol extract of Vernonia Amygdalina for the corrosion of mild steel in H2SO4,” Portugaliae Electrochimica Acta, vol. 27, no. 1, pp. 33–45, 2009. View at Google Scholar
  19. S. A. Umoren and E. E. Ebenso, “Studies of the anti-corrosive effect of Raphia hookeri exudate gum-halide mixtures for aluminium corrosion in acidic medium,” Pigment and Resin Technology, vol. 37, no. 3, pp. 173–182, 2008. View at Publisher · View at Google Scholar
  20. M. Abdallah, “Guar gum as corrosion inhibitor for carbon steel in sulphuric acid solutions,” Portugaliae Electrochimica Acta, vol. 22, pp. 161–175, 2004. View at Google Scholar
  21. P. C. Okafor, U. J. Ekpe, E. E. Ebenso, E. M. Umoren, and K. E. Leizou, “Inhibition of mild steel corrosion in acidic medium by Allium sativum extracts,” Bulletin of Electrochemistry, vol. 21, no. 8, pp. 347–352, 2005. View at Google Scholar
  22. P. C. Okafor and E. E. Ebenso, “Inhibitive action of Carica papaya extracts on the corrosion of mild steel in acidic media and their adsorption characteristics,” Pigment and Resin Technology, vol. 36, no. 3, pp. 134–140, 2007. View at Publisher · View at Google Scholar
  23. P. C. Okafor, V. I. Osabor, and E. E. Ebenso, “Eco-friendly corrosion inhibitors: Inhibitive action of ethanol extracts of Garcinia kola for the corrosion of mild steel in H2SO4 solutions,” Pigment and Resin Technology, vol. 36, no. 5, pp. 299–305, 2007. View at Publisher · View at Google Scholar
  24. P. C. Okafor, M. E. Ikpi, I. E. Uwah, E. E. Ebenso, U. J. Ekpe, and S. A. Umoren, “Inhibitory action of Phyllanthus amarus extracts on the corrosion of mild steel in acidic media,” Corrosion Science, vol. 50, no. 8, pp. 2310–2317, 2008. View at Publisher · View at Google Scholar
  25. A. Y. El-Etre and M. Abdallah, “Natural honey as corrosion inhibitor for metals and alloys. II. C-steel in high saline water,” Corrosion Science, vol. 42, no. 4, pp. 731–738, 2000. View at Google Scholar
  26. A. Chetouani, B. Hammouti, and M. Benkaddour, “Corrosion inhibition of iron in hydrochloric acid solution by jojoba oil,” Pigment and Resin Technology, vol. 33, no. 1, pp. 26–31, 2004. View at Google Scholar
  27. A. Bouyanzer and B. Hammouti, “A study of anti-corrosive effects of Artemisia oil on steel,” Pigment and Resin Technology, vol. 33, no. 5, pp. 287–292, 2004. View at Publisher · View at Google Scholar
  28. E. E. Oguzie, “Inhibition of acid corrosion of mild steel by Telfaria occidentalis extract,” Pigment and Resin Technology, vol. 34, no. 6, pp. 321–326, 2005. View at Publisher · View at Google Scholar
  29. E. E. Oguzie, “Studies on the inhibitive effect of Occimum viridis extract on the acid corrosion of mild steel,” Materials Chemistry and Physics, vol. 99, pp. 441–446, 2006. View at Google Scholar
  30. E. E. Oguzie, “Corrosion inhibition of aluminium in acidic and alkaline media by Sansevieria trifasciata extract,” Corrosion Science, vol. 49, no. 3, pp. 1527–1539, 2007. View at Google Scholar
  31. M. A. Bendahou, M. B. E. Benadellah, and B. B. Hammouti, “A study of rosemary oil as a green corrosion inhibitor for steel in 2 M H3PO4,” Pigment and Resin Technology, vol. 35, no. 2, pp. 95–100, 2006. View at Google Scholar
  32. M. G. Sethuraman and P. B. Raja, “Corrosion inhibition of mild steel by Datura metel in acidic medium,” Pigment and Resin Technology, vol. 34, no. 6, pp. 327–331, 2005. View at Publisher · View at Google Scholar
  33. N. O. Eddy, S. A. Odoemelam, and A. O. Odiongenyi, “Ethanol extract of musa species peels as a green corrosion inhibitor for mild steel: Kinetics, adsorption and thermodynamic considerations,” Electronic Journal of Environmental, Agricultural and Food Chemistry, vol. 8, no. 4, pp. 243–255, 2009. View at Google Scholar
  34. P. Deepa Rani and S. Selvaraj, “Inhibitive and adsorption properties of punica granatum extract on brass in acid media,” Journal of Phytology, vol. 2, no. 11, pp. 58–64, 2010. View at Google Scholar
  35. S. Rajendran, V. Ganga Sri, J. Arockiaselvi, and A. J. Amalraj, “Corrosion inhibition by plant extracts—an overview,” Bulletin of Electrochemistry, vol. 21, no. 8, pp. 367–377, 2005. View at Google Scholar
  36. K. Srivastava and P. Srivastava, “Studies on plant materials as corrosion inhibitors,” British Corrosion Journal, vol. 16, no. 4, pp. 221–223, 1981. View at Google Scholar
  37. R. M. Saleh, A. A. Ismail, and A. A. El Hosary, “corrosion inhibition by naturally occurring substances. vii. the effect of aqueous extracts of some leaves and fruit peels on the corrosion of steel, Al, Zn and Cu in acids,” British Corrosion Journal, vol. 17, no. 3, pp. 131–135, 1982. View at Google Scholar
  38. P. B. Raja and M. G. Sethuraman, “Natural products as corrosion inhibitor for metals in corrosive media—a review,” Materials Letters, vol. 62, no. 1, pp. 113–116, 2008. View at Publisher · View at Google Scholar
  39. J. H. Henriquez-Román, M. Sancy, M. A. Páez et al., “The influence of aniline and its derivatives on the corrosion behaviour of copper in acid solution,” Journal of Solid State Electrochemistry, vol. 9, no. 7, pp. 504–511, 2005. View at Publisher · View at Google Scholar
  40. A. A. El Hosary, R. M. Saleh, and A. M. Shams El Din, “Corrosion inhibition by naturally occurringsubstances-I. The effect of Hibiscus subdariffa (karkade) extract on the dissolution of Al and Zn,” Corrosion Science, vol. 12, no. 12, pp. 897–904, 1972. View at Google Scholar
  41. R. M. Saleh and A. M. Shams El Din, “Efficiency of organic acids and their anions in retarding the dissolution of aluminium,” Corrosion Science, vol. 12, no. 9, pp. 689–697, 1972. View at Google Scholar
  42. M. J. Sanghvi, S. K. Shuklan, A. N. Misra, M. R. Padh, and G. N. Mehta, “Inhibition of hydrochloric acid corrosion of mild steel by aid extracts of Embilica officianalis, Terminalia bellirica and Terminalia chebula,” Bulletin of Electrochemistry, vol. 13, no. 8-9, pp. 358–361, 1997. View at Google Scholar
  43. M. J. Shangvi, S. K. Shukla, A. N. Mishra, M. R. padh, and G. N. Mehta, “Corrosion inhibition of mild steel in hydrochloric acid by acid extracts of Sapindus Trifolianus, Acacia Concian and Trifla,” Transactions of the Metal Finishers Association of India, vol. 5, no. 3, pp. 143–147, 1996. View at Google Scholar
  44. A. Chetouani and B. Hammouti, “Corrosion inhibition of iron in hydrochloric acid solutions by naturally henna,” Bulletin of Electrochemistry, vol. 19, no. 1, pp. 23–25, 2003. View at Google Scholar
  45. B. Muller, W. Klager, and G. Kubitzki, “Metal chelates of citric acid as corrosion inhibitors for zinc pigment,” Corrosion Science, vol. 39, no. 8, pp. 1481–1485, 1997. View at Google Scholar
  46. A. Bouyanzer, L. Majidi, and B. Hammouti, “Effect of eucalyptus oil on the corrosion of steel in 1M HCl,” Bulletin of Electrochemistry, vol. 22, no. 7, pp. 321–324, 2006. View at Google Scholar
  47. A. Y. El-Etre, “Natural onion juice as inhibitor for zinc corrosion,” Bulletin of Electrochemistry, vol. 22, no. 2, pp. 75–80, 2006. View at Google Scholar
  48. I. Radojcic, K. Berković, S. Kovač, and J. Vorkapić-Furač, “Natural honey and black radish juice as tin corrosion inhibitors,” Corrosion Science, vol. 50, no. 5, pp. 1498–1504, 2008. View at Google Scholar
  49. A. Y. El-Etre, M. Abdallah, and Z. E. El-Tantawy, “Corrosion inhibition of some metals using lawsonia extract,” Corrosion Science, vol. 47, no. 2, pp. 385–395, 2005. View at Google Scholar
  50. S. A. Umoren, I. B. Obot, and E. E. Ebenso, “Corrosion inhibition of aluminium using exudate gum from Pachylobus edulis in the presence of halide ions in HCl,” E-Journal of Chemistry, vol. 5, no. 2, pp. 355–364, 2008. View at Google Scholar
  51. N. O. Eddy and E. E. Ebenso, “Adsorption and inhibitive properties of ethanol extracts of Musa sapientum peels as a green corrosion inhibitor for mild steel in H2SO4,” African Journal of Pure and Applied Chemistry, vol. 2, no. 6, pp. 046–054, 2008. View at Google Scholar
  52. S. Lyon, “A natural way to stop corrosion,” Nature, vol. 427, no. 406, p. 407, 2004. View at Google Scholar
  53. E. E. Oguzie, K. L. Iyeh, and A. I. Onuchukwu, “Inhibition of mild steel corrosion in acidic media by aqueous extracts from Garcinia kola seed,” Bulletin of Electrochemistry, vol. 22, no. 2, pp. 63–68, 2006. View at Google Scholar
  54. R. M. Saldo, A. A. Ismail, and A. A. El Hosary, “Corrosion Inhibition by naturally occurring substances,” British Corrosion Journal, vol. 17, no. 3, pp. 131–135, 1990. View at Google Scholar
  55. E. E. Oguzie, “Corrosion inhibitive effect and adsorption bBehaviour of Hibiscus Sabdariffa extract on mild steel in acidic media,” Portugaliae Electrochimica Acta, vol. 26, pp. 303–314, 2008. View at Google Scholar
  56. E. E. Oguzie, “Corrosion inhibitive effect and adsorption behaviour of Hibiscus sabdariffa extract on mild steel in acidic media,” Portugaliae Electrochimica Acta, vol. 26, no. 3, pp. 303–314, 2008. View at Google Scholar
  57. H. W. Shi, F. C. Liu, E. H. Han, and M. C. Sun, “Investigation on a sol-gel coating containing inhibitors on 2024-T3 aluminum alloy,” Chinese Journal of Aeronautics, vol. 19, pp. S106–S112, 2006. View at Google Scholar
  58. G. D. Davis, “The Use of Extracts of Tobacco Plants as Corrosion Inhibitors,” http://www.electrochem.Org/dl/ma/202/pdfs/0340.PDF.
  59. A. Y. El-Etre, “Inhibition of acid corrosion of aluminum using vanillin,” Corrosion Science, vol. 43, no. 6, pp. 1031–1039, 2001. View at Google Scholar
  60. W. A. Badawy, F. M. Allhara, and A. S. ElAzab, “Electrochemical behaviour and corrosion inhibition of Al, Al-6061 and Al-Cu in neutral aqueous solutions,” Corrosion Science, vol. 41, no. 4, pp. 709–727, 1999. View at Google Scholar
  61. B. Müller, “Amino and polyamino acids as corrosion inhibitors for aluminium and zinc pigments,” Pigment and Resin Technology, vol. 31, no. 2, pp. 84–87, 2002. View at Google Scholar
  62. M. Kliskic, J. Radosevi, and S. Gudic, “Pyridine and its derivatives as inhibitors of aluminium corrosion in chloride solution,” Journal of Applied Electrochemistry, vol. 27, no. 6, pp. 947–952, 1997. View at Google Scholar
  63. R. Solmaz, G. Kardaş, B. Yazici, and M. Erbil, “Citric acid as natural corrosion inhibitor for aluminium protection,” Corrosion Engineering Science and Technology, vol. 43, no. 2, pp. 186–191, 2008. View at Publisher · View at Google Scholar
  64. Z. Sibel, “The effects of benzoic acid in chloride solutions on the corrosion of iron and aluminum,” Turkish Journal of Chemistry, vol. 26, no. 3, pp. 403–408, 2002. View at Google Scholar
  65. K. Berkovic, S. Kovac, and J. Vorkapic-Furac, “Natural compounds as environmentally friendly corrosion inhibitors of aluminium,” Acta Alimentaria, vol. 33, no. 3, pp. 237–247, 2004. View at Google Scholar
  66. Y. Tao, X. Zhang, and Z. Gu, “The inhibition of corrosion of aluminum in acid environment byin situ electrocoagulation of polybutadienoic acid,” Wuhan University Journal of Natural Sciences, vol. 3, no. 2, pp. 221–225, 1998. View at Google Scholar
  67. B. Müller and M. Kurfeß, “Saccharide und deren Derivate als Korrosionsinhibitoren für Aluminiumpigmente in wäßrigen Medien,” Materials and Corrosion, vol. 44, no. 9, pp. 373–378, 2004. View at Google Scholar
  68. G. O. Avwiri and F. O. Igho, “Inhibitive action of Vernonia amygdalina on the corrosion of aluminium alloys in acidic media,” Materials Letters, vol. 57, no. 22-23, pp. 3705–3711, 2003. View at Publisher · View at Google Scholar
  69. S. Manish Kumar, K. Sudesh, R. Ratnani, and S. P. Mathur, “Corrosion inhibition of Aluminium by extracts of Prosopis cineraria in acidic media,” Bulletin of Electrochemistry, vol. 22, no. 2, pp. 69–74, 2006. View at Google Scholar
  70. A. A. Hossary, M. M. Gauish, and R. M. Saleh, “Corrosion inhibitor formulations from coal-tar distillation products for acid cleaning of steel in HCl,” in Proceedings of the 2nd International Symposium on Industrial and Oriented Basic Electrochemistry, pp. 6–18, SAEST, CECRI, Madras, India, 1980.
  71. R. A. Tupikov, Y. G. Dragunov, I. L. Kharina, and D. S. Zmienko, “Protection of carbon steels against atmospheric corrosion in a wet tropical climate using gas-plasma metallization with aluminum,” Protection of Metals, vol. 44, no. 7, pp. 673–682, 2008. View at Publisher · View at Google Scholar
  72. P. Arora, T. Jain, and S. P. Mathur, Chemistry, vol. 1, p. 766, 2005.
  73. M. A. Quraishi, D. K. Yadav, and I. Ahamad, “Green approach to corrosion inhibition by black pepper extract in hydrochloric acid solution,” Open Corrosion Journal, vol. 2, pp. 56–60, 2009. View at Google Scholar
  74. N. Lahhit, A. Bouyanzer, J.-M. Desjobert et al., “Fennel (Foeniculum vulgare) essential oil as green corrosion Inhibitor of carbon steel in hydrochloric acid solution,” Portugaliae Electrochimica Acta, vol. 29, no. 2, pp. 127–138, 2011. View at Google Scholar
  75. E. E. Oguzie, “Corrosion inhibition of mild steel in hydrochloric acid solution by methylene blue dye,” Materials Letters, vol. 59, no. 8-9, pp. 1076–1079, 2005. View at Publisher · View at Google Scholar
  76. A. Zarrouk, I. Warad, B. Hammouti, A. Dafali, S. S. Al-Deyab, and N. Benchat, “The effect of temperature on the corrosion of Cu/HNO3 in the Presence of organic inhibitor: Part-2,” International Journal of Electrochemical Science, vol. 5, no. 10, pp. 1516–1526, 2010. View at Google Scholar
  77. K. P. Vinod Kumar, M. S. Narayanan Pillai, and G. Rexin Thusnavis, “Pericarp of the fruit of garcinia mangostana as corrosion inhibitor for mild steel in hydrochloric acid medium,” Portugaliae Electrochimica Acta, vol. 28, no. 6, pp. 373–383, 2010. View at Google Scholar
  78. H. A. Jung, B. N. Su, W. J. Keller, R. G. Mehta, and A. D. Kinghorn, “Antioxidant xanthones from the pericarp of Garcinia mangostana (Mangosteen),” Journal of Agricultural and Food Chemistry, vol. 54, no. 6, pp. 2077–2082, 2006. View at Publisher · View at Google Scholar · View at PubMed
  79. I. B. Obot, N. O. Obi-Egbedi, S. A. Umoren, and E. E. Ebenso, “Synergistic and antagonistic effects of anions and ipomoea invulcrata as green corrosion inhibitor for aluminium dissolution in acidic medium,” International Journal of Electrochemical Science, vol. 5, no. 7, pp. 994–1007, 2010. View at Google Scholar
  80. I. B. Obot and N. O. Obi-Egbedi, “Ipomoea involcrata as an ecofriendly inhibitor for aluminium in alkaline medium,” Portugaliae Electrochimica Acta, vol. 27, no. 4, pp. 517–524, 2009. View at Google Scholar
  81. I. B. Obot and N. O. Obi-Egbedi , “An interesting and efficient green corrosion inhibitor for aluminium from extracts of Chlomolaena odorata L. in acidic solution,” Journal of Applied Electrochemistry, vol. 40, no. 11, pp. 1977–1983, 2010. View at Google Scholar
  82. N. O. Eddy, P. A. Ekwumemgbo, and P. A. P. Mamza, “Ethanol extract of Terminalia catappa as a green inhibitor for the corrosion of mild steel in H2SO4,” Green Chemistry Letters and Reviews, vol. 2, no. 4, pp. 223–231, 2009. View at Publisher · View at Google Scholar
  83. F. A. de Souza and A. Spinelli, “Caffeic acid as a green corrosion inhibitor for mild steel,” Corrosion Science, vol. 51, no. 3, pp. 642–649, 2008. View at Google Scholar
  84. O. K. Abiola, J. O. E. Otaigbe, and O. J. Kio, “Gossipium hirsutum L. extracts as green corrosion inhibitor for aluminum in NaOH solution,” Corrosion Science, vol. 51, no. 8, pp. 1879–1881, 2009. View at Publisher · View at Google Scholar
  85. F. Tirbonod and C. Fiaud, “Inhibition of the corrosion of aluminium alloys by organic dyes,” Corrosion Science, vol. 18, no. 2, pp. 139–149, 1978. View at Google Scholar
  86. J. D. Talati and J. M. Daraji, “Inhibition of corrosion of B26S aluminium in phosphoric acid by some azo dyes,” Journal of the Indian Chemical Society, vol. 68, no. 2, pp. 67–72, 1991. View at Google Scholar
  87. P. Gupta, R. S. Chaudhary, T. K. G. Namboodhiri, B. Prakash, and B. B. Prasad, “Effect of mixed inhibitors on dezincification and corrosion of 63/37 brass in 1% sulfuric acid,” Corrosion, vol. 40, no. 1, pp. 33–36, 1984. View at Google Scholar
  88. P. B. Tandel and B. N. Oza, “Performance of some dyestuffs as inhibitors during corrosion of mild-steel in binary acid mixtures (HCl + HNO3),” Journal of the Electrochemical Society of India, vol. 49, pp. 49–128, 2000. View at Google Scholar
  89. M. L. Zheludkevich, R. Serra, M. F. Montemor, and M. G. S. Ferreira, “Oxide nanoparticle reservoirs for storage and prolonged release of the corrosion inhibitors,” Electrochemistry Communications, vol. 7, no. 8, pp. 836–840, 2005. View at Publisher · View at Google Scholar
  90. V. V. Torres, R. S. Amado, C. Faia de Sá et al., “Inhibitory action of aqueous coffee ground extracts on the corrosion of carbon steel in HCl solution,” Corrosion Science, vol. 53, no. 7, pp. 2385–2392, 2011. View at Google Scholar
  91. G. G. Geesey, “Microbial exopolymers: ecological and econimic considerations,” American Society Microbiology News, vol. 48, pp. 9–14, 1982. View at Google Scholar
  92. I. B. Beech and C. C. Gaylarde, “Recent advances in the study of biocorrosion—an overview,” Revista de Microbiologia, vol. 30, no. 3, pp. 177–190, 1999. View at Google Scholar
  93. P. S. Guiamet and S. G. Gomez De Saravia, “Laboratory studies of biocorrosion control using traditional and environmentally friendly biocides: an overview,” Latin American Applied Research, vol. 35, no. 4, pp. 295–300, 2005. View at Google Scholar
  94. M. F. Montemor, W. Trabelsi, M. Zheludevich, and M. G. S. Ferreira, “Modification of bis-silane solutions with rare-earth cations for improved corrosion protection of galvanized steel substrates,” Progress in Organic Coatings, vol. 57, no. 1, pp. 67–77, 2006. View at Publisher · View at Google Scholar
  95. A. Pepe, M. Aparicio, S. Ceré, and A. Durán, “Preparation and characterization of cerium doped silica sol-gel coatings on glass and aluminum substrates,” Journal of Non-Crystalline Solids, vol. 348, pp. 162–171, 2004. View at Publisher · View at Google Scholar
  96. X. W. Yu, C. N. Cao, Z .M. Yao, Z. Derui, and Y. Zhongda, “Corrosion behavior of rare earth metal (REM) conversion coatings on aluminum alloy LY12,” Materials Science and Engineering A, vol. 284, no. 1-2, pp. 56–63, 2000. View at Google Scholar
  97. A. N. Khramov, N. N. Voevodin, V. N. Balbyshev, and M. S. Donley, “Hybrid organo-ceramic corrosion protection coatings with encapsulated organic corrosion inhibitors,” Thin Solid Films, vol. 447-448, pp. 549–557, 2004. View at Publisher · View at Google Scholar
  98. E. M. Sherif and S. M. Park, “Effects of 1,4-naphthoquinone on aluminum corrosion in 0.50 M sodium chloride solutions,” Electrochimica Acta, vol. 51, no. 7, pp. 1313–1321, 2006. View at Publisher · View at Google Scholar
  99. M. S. Donley, R. A. Mantz, A. N. Khramov, V. N. Balbyshev, L. S. Kasten, and D. J. Gaspar, “The self-assembled nanophase particle (SNAP) process: a nanoscience approach to coatings,” Progress in Organic Coatings, vol. 47, no. 3-4, pp. 401–415, 2003. View at Publisher · View at Google Scholar
  100. D. V. Andreeva, D. Fix, H. Möhwald, and D. G. Shchukin, “Self-healing anticorrosion coatings based on pH-sensitive polyelectrolyte/inhibitor sandwichlike nanostructures,” Advanced Materials, vol. 20, no. 14, pp. 2789–2794, 2008. View at Publisher · View at Google Scholar
  101. M. L. Zheludkevich, D. G. Shchukin, K. A. Yasakau, H. Möhwald, and M. G. S. Ferreira, “Anticorrosion coatings with self-healing effect based on nanocontainers impregnated with corrosion inhibitor,” Chemistry of Materials, vol. 19, no. 3, pp. 402–411, 2007. View at Publisher · View at Google Scholar
  102. V. DeGiorgi, “Corrosion basics and computer modeling,” in Industrial Applications of the BEM, chapter 2, pp. 47–79, 1986. View at Google Scholar
  103. H. Sun, P. Ren, and J. R. Fried, “The compass force field: parameterization and validation for polyphosphazenes,” Computational and Theoretical Polymer, vol. 8, pp. 229–246, 1998. View at Google Scholar
  104. N. G. Zamani, J. F. Porter, and A. A. Mufti, “Survey of computational efforts in the field of corrosion engineering,” International Journal for Numerical Methods in Engineering, vol. 23, no. 7, pp. 1295–1311, 1986. View at Google Scholar
  105. R. S. Munn, “A review of the development of Computational Corrosion analysis for special corrosion modelling through its maturity in the Mid 1980’s-Computer modelling in Corrosion,” ASTM STP 1154 American Study for Testing and Materials, Philadelphia, pp 215-228, 1991.
  106. K. F. Khaled, “Molecular simulation, quantum chemical calculations and electrochemical studies for inhibition of mild steel by triazoles,” Electrochimica Acta, vol. 53, no. 9, pp. 3484–3492, 2008. View at Google Scholar
  107. F. J. Presuel-Moreno, H. Wang, M. A. Jakab, R. G. Kelly, and J. R. Scully, “Computational modeling of active corrosion inhibitor release from an Al-Co-Ce metallic coating,” Journal of the Electrochemical Society, vol. 153, no. 11, Article ID 002611JES, pp. B486–B498, 2006. View at Publisher · View at Google Scholar
  108. Pradip and B. Rai, “Design of tailor-made surfactants for industrial applications using a molecular modelling approach,” Colloids and Surfaces A, vol. 205, no. 1-2, pp. 139–148, 2002. View at Google Scholar
  109. K. F. Khaled and M. A. Amin, “Computational and electrochemical investigation for corrosion inhibition of nickel in molar nitric acid by piperidines,” Journal of Applied Electrochemistry, vol. 38, no. 11, pp. 1609–1621, 2008. View at Google Scholar
  110. K. F. Khaled and M. A. Amin, “Electrochemical and molecular dynamics simulation studies on the corrosion inhibition of aluminum in molar hydrochloric acid using some imidazole derivatives,” Journal of Applied Electrochemistry, vol. 39, no. 12, pp. 2553–2568, 2009. View at Publisher · View at Google Scholar