Research Article
Corrosion Behaviour of AZ and ZA Magnesium Alloys in Alkaline Chloride Media
Table 1
Chemical composition (wt%)* of the magnesium alloys used.
| Alloy | Al | Zn | Ca | Sr | Mn | Si | Fe | Cu | Ni | Mg |
| AZ91D | 9.00 | 0.67 | — | — | 0.33 | 0.010 | 0.005 | 0.030 | 0.002 | Bal. | AZ91E | 8.70 | 0.70 | — | — | 0.26 | 0.200 | 0.005 | 0.015 | 0.001 | Bal. | ZA104 | 3.69 | 9.73 | — | — | 0.25 | 0.015 | 0.030 | <0.001 | 0.001 | Bal. | ZAC10403 | 3.78 | 10.5 | 0.31 | — | 0.03 | 0.001 | 0.003 | <0.001 | 0.002 | Bal. | ZACS1040305 | 4.12 | 11.7 | 0.31 | 0.54 | 0.35 | 18 ppm | 189 ppm | 2 ppm | 2 ppm | Bal. |
|
|
Throughout the text, the percentage of elements and solution concentration is expressed in weight percent.
|