Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2012, Article ID 478508, 14 pages
http://dx.doi.org/10.1155/2012/478508
Research Article

Determination of Susceptibility to Intergranular Corrosion of UNS 31803 Type Duplex Stainless Steel by Electrochemical Reactivation Method: A Comparative Study

1Metallurgical and Materials Engineering Department, METU, 06800 Çankaya, Ankara, Turkey
2Mechanical Engineering Department, Faculty of Engineering, Atılım University, 06836 Incek, Ankara, Turkey

Received 19 July 2012; Revised 14 September 2012; Accepted 28 September 2012

Academic Editor: W. Ke

Copyright © 2012 Mehmet Emin Arıkan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Wensley and C. Reid, “Duplex stainless steels in the pulp and paper industry,” in Proceedings of the Duplex Stainless Steels, J. Charles and S. Bernhardsson, Eds., vol. 1 of Les Editions de Physique, pp. 1099–1110, 1992.
  2. J. Husbands and P. K. Whitkraft, “CORROSION/91,” Paper 171, NACE, Houston, Tex, USA, 1991. View at Google Scholar
  3. D. J. A. Fruytier, in Duplex Stainless Steels '91, J. Charles and S. Bernhardsson, Eds., Les Editions de Physique, p. 499, 1992.
  4. P. Jolly, Bulletin du Cercle d'Etudes des Metaux, vol. XII-5, no. 5, p. 317, 1973.
  5. D. Y. Kobayashi and S. Wolynec, “Evaluation of the low corrosion resistant phase formed during the sigma phase precipitation in duplex stainless steels,” Materials Research, vol. 2, no. 4, p. 239, 1999. View at Google Scholar
  6. J. S. Kim and H. S. Kwon, “Effects of tungsten on corrosion and kinetics of sigma phase formation of 25% chromium duplex stainless steels,” Corrosion, vol. 55, no. 5, pp. 512–521, 1999. View at Publisher · View at Google Scholar
  7. G. M. Gordon, “Physical Metallurgy of Fe-Cr-Ni Alloys,” in Stress Corrosion Cracking and Hydrogen Embrittlement Iron Base Alloys, R. W. Staehle, Ed., pp. 893–945, NACE, Houston, Tex, USA, 1977. View at Google Scholar
  8. E. O. Hall and S. H. Algie, “The Sigma phase,” Metallurgical Reviews, vol. 11, pp. 61–88, 1966. View at Google Scholar
  9. T. A. Debold, “Duplex stainless steel-microstructure and properties,” Journal of metals, vol. 41, no. 3, pp. 12–15, 1989. View at Google Scholar · View at Scopus
  10. S. D. Brandi and A. F. Padilha, in Proceedings of 2nd Brazilian Seminars on Stainless Steels-(INOX '90), pp. 135–152, ABM, Sao Paulo, Brazil, 1990.
  11. Y. Maehara, M. Koike, N. Jujiro, and T. Kunitake, Transactions of the Iron and Steel Institute of Japan, vol. 23, no. 3, p. 669, 1983.
  12. P. Jolly and J. Hochmann, “Structural changes in austenitic-ferritic stainless steel on holding between 600 and 1150 C,” Memoires et Etudes Scientifiques de la Revue de Metallurgie, vol. 70, no. 2, pp. 117–124, 1973. View at Google Scholar · View at Scopus
  13. J. M. Vitek and S. A. David, “Sigma phase transformation in austenitic stainless steels,” Welding Journal, vol. 65, no. 4, p. 106, 1986. View at Google Scholar · View at Scopus
  14. “Duplex stainless steel: a tale of two phases,” in Proceedings of the Duplex Stainless Steels Conference, H. D. Solomon, T. M. Devine, and R. A. Lula, Eds., p. 693, ASM, Metals Park, Ohio, USA, 1984.
  15. C. H. Shek, K. W. Wong, and J. K. Lai, “Review of temperature indicators and the use of duplex stainless steels for life assessment,” Materials Science and Engineering R, vol. 19, no. 5-6, pp. 153–200, 1997. View at Google Scholar
  16. M. E. Wilms, V. J. Gadgil, J. M. Krougman, and B. H. Kolster, “Effect of σ-phase precipitation at 800°C on the mechanical properties of a high alloyed duplex stainless steel,” Materials at High Temperatures, vol. 9, no. 3, pp. 160–166, 1991. View at Google Scholar · View at Scopus
  17. T. H. Chen and J. R. Yang, Materials Science and Engineering A, vol. 11, p. 28, 2001.
  18. N. Lopez, M. Cid, and M. Puiggali, “Influence of σ-phase on mechanical properties and corrosion resistance of duplex stainless steels,” Corrosion Science, vol. 41, no. 8, pp. 1615–1631, 1999. View at Publisher · View at Google Scholar · View at Scopus
  19. R. Francis, “Discussion on: influence of Sigma phase on general and pitting corrosion resistance of 2205 duplex stainless steel by J H Potgieter,” British Corrosion Journal, vol. 27, no. 4, pp. 319–320, 1992. View at Google Scholar
  20. F. Egan, Stainless Steel World, vol. 9, no. 10, p. 61, 1997.
  21. R. N. Gunn, The Twi Journal, vol. 7, no. 1, pp. 5–45, 1998.
  22. J. E. Truman and K. R. Pirt, in Duplex Stainless Steel, R. A. Lula, Ed., pp. 113–142, ASM, Metals Park, Ohio, USA, 1983.
  23. K. N. Adhe, V. Kain, K. Madangopal, and H. S. Gadiyar, “Influence of sigma-phase formation on the localized corrosion behavior of a duplex stainless steel,” Journal of Materials Engineering and Performance, vol. 5, no. 4, pp. 500–506, 1996. View at Google Scholar · View at Scopus
  24. M. E. Wilms, V. J. Gadgil, J. M. Krougman, and F. P. Ijsseling, “The effect of σ-phase precipitation at 800°C on the corrosion resistance in sea-water of a high alloyed duplex stainless steel,” Corrosion Science, vol. 36, no. 5, pp. 871–881, 1994. View at Google Scholar · View at Scopus
  25. ASTM A262-02: Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels.
  26. ASTM G108-94: Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels.
  27. M. E. Arikan and M. Doruk, “Determination of susceptibility to intergranular corrosion of UNS 31803 type duplex stainless steel by electrochemical reactivation method,” Turkish Journal of Engineering and Environmental Sciences, vol. 32, no. 6, pp. 323–335, 2008. View at Google Scholar · View at Scopus
  28. M. E. Arikan, R. Arikan, and M. Doruk, “Determination of susceptibility to intergranular corrosion of UNS 31803 type duplex stainless steel by electrochemical reactivation method,” International Journal of Corrosion, vol. 2012, Article ID 651829, 10 pages, 2012. View at Publisher · View at Google Scholar
  29. ASTM A923-03: Standard Test Methods for Detecting Detrimental Intermetallic Phase In Duplex Austenitic / Ferritic Stainless Steels.
  30. A. P. Majidi and M. A. Streicher, “Potentiodynamic reactivation method for detecting sensitization in alsl 304 and 304L stainless steels,” Corrosion, vol. 40, no. 8, pp. 393–408, 1984. View at Google Scholar · View at Scopus
  31. A. P. Majidi and M. A. Streicher, Paper presented at NACE, CORROSION/84, no. 261, 1984.
  32. “Duplex stainless steel: a tale of two phases,” in Proceedings of the Duplex Stainless Steels, H. D. Solomon, T. M. Devine, and R. A. Lula, Eds., p. 693, Metals Park, Ohio, USA, 1984.
  33. E. L. Hall and C. L. Briant, “Chromium depletion in the vicinity of carbides in sensitized austenitic stainless steels,” Metallurgical and Materials Transactions A, vol. 15, no. 5, pp. 793–811, 1984. View at Publisher · View at Google Scholar
  34. R. N. Wright, in Toughness of Ferritic Stainless Steels, R. A. Rula, Ed., vol. 706, p. 2, ASTM-Special Technical Publication, West Conshohocken, Pa, USA, 1979.
  35. C. J. Park and H. S. Kwon, “Effects of aging at 475°C on corrosion properties of tungsten-containing duplex stainless steels,” Corrosion Science, vol. 44, no. 12, pp. 2817–2830, 2002. View at Publisher · View at Google Scholar · View at Scopus
  36. A. Legat and V. Dolecek, “Chaotic analysis of electrochemical noise measured on stainless steel,” Journal of the Electrochemical Society, vol. 142, no. 6, pp. 1851–1858, 1995. View at Google Scholar · View at Scopus