Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2012, Article ID 760284, 9 pages
http://dx.doi.org/10.1155/2012/760284
Research Article

Deposition of Cerium-Based Conversion Coatings on Aluminum Alloy 380

Materials Research Center and Department of Materials Science and Engineering, Missouri University of Science & Technology, Rolla, MO 65409, USA

Received 11 May 2012; Revised 18 July 2012; Accepted 23 July 2012

Academic Editor: Ingrid Milošev

Copyright © 2012 Ci Lin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. G. Kaufman and E. L. Rooy, Aluminum Alloy Castings: Properties, Processes, and Applications, American Society for Materials International, Materials Park, Ohio, USA, 2004.
  2. J. E. Hatch and Aluminum:, Properties and Physical Metallurgy, American Society for Materials International, Materials Park, Ohio, USA, 1984.
  3. J. R. Davis, Corrosion of Aluminum and Aluminum Alloys, American Society for Materials International, Materials Park, Ohio, USA, 1999.
  4. E. H. Hollingsworth and H. Y. Hunsicker, Corrosion, vol. 13 of ASM Handbook, American Society for Materials International, Materials Park, Ohio, USA, 1990.
  5. S. S. Wise, J. H. C. Schuler, A. L. Holmes et al., “Comparison of two particulate hexavalent chromium compounds: barium chromate is more genotoxic than lead chromate in human lung cells,” Environmental and Molecular Mutagenesis, vol. 44, no. 2, pp. 156–162, 2004. View at Publisher · View at Google Scholar · View at Scopus
  6. http://www.osha.gov/SLTC/hexavalentchromium/index.html.
  7. H. J. Gibb, P. S. J. Lees, P. F. Pinsky, and B. C. Rooney, “Lung cancer among workers in chromium chemical production,” American Journal of Industrial Medicine, vol. 38, no. 2, pp. 115–126, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. R. G. Buchheit and A. E. Hughes, “Chromate and chromate-free conversion coatings,” in Corrosion: Fundamentals, Testing and Protection, vol. 13A of ASM Handbook, pp. 720–735, American Society for Materials International, Materials Park, Ohio, USA, 2003. View at Google Scholar
  9. B. Meyers and S. Lynn, Surface Engineering, vol. 5 of ASM Handbook, American Society for Materials International, Materials Park, Ohio, USA, 1990.
  10. D. Zhao, J. Sun, L. Zhang, Y. Tan, and J. Li, “Corrosion behavior of rare earth cerium based conversion coating on aluminum alloy,” Journal of Rare Earths, vol. 28, no. 1, pp. 371–374, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. G. R. Salazar-Banda, S. R. Moraes, A. J. Motheo, and S. A. S. MacHado, “Anticorrosive cerium-based coatings prepared by the sol-gel method,” Journal of Sol-Gel Science and Technology, vol. 52, no. 3, pp. 415–423, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. B. R. W. Hinton, D. R. Arnott, and N. E. Ryan, “Cerium conversion coatings for the corrosion protection of aluminum,” Materials Forum, vol. 9, no. 3, pp. 162–173, 1986. View at Google Scholar · View at Scopus
  13. B. R. W. Hinton, “Corrosion inhibition with rare earth metal salts,” Journal of Alloys and Compounds, vol. 180, no. 1-2, pp. 15–25, 1992. View at Google Scholar · View at Scopus
  14. D. K. Heller, Phosphate post-treatment of cerium-based conversion coatings on Al 2024-T3 [Ph.D. dissertation], Missouri University of Science and Technology, 2010.
  15. S. Joshi, E. A. Kulp, W. G. Fahrenholtz, and M. J. O'Keefe, “Dissolution of cerium from cerium-based conversion coatings on Al 7075-T6 in 0.1M NaCl solutions,” Corrosion Science, vol. 60, pp. 290–295, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Geng, W. R. Pinc, P. Yu et al., “Influence of cleaning on the deposition rate of cerium based conversion coatings on Al alloy 2024-T3,” Journal of Applied Surface Finishing, vol. 2, no. 4, pp. 276–282, 2007. View at Google Scholar
  17. W. Pinc, S. Geng, M. O'Keefe, W. Fahrenholtz, and T. O'Keefe, “Effects of acid and alkaline based surface preparations on spray deposited cerium based conversion coatings on Al 2024-T3,” Applied Surface Science, vol. 255, no. 7, pp. 4061–4065, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. D. K. Heller, W. G. Fahrenholtz, and M. J. O'Keefe, “The effect of post-treatment time and temperature on cerium-based conversion coatings on Al 2024-T3,” Corrosion Science, vol. 52, no. 2, pp. 360–368, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. W. Pinc, P. Yu, M. O'Keefe, and W. Fahrenholtz, “Effect of gelatin additions on the corrosion resistance of cerium based conversion coatings spray deposited on Al 2024-T3,” Surface and Coatings Technology, vol. 203, no. 23, pp. 3533–3540, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. B. F. Rivera, B. Y. Johnson, M. J. O'Keefe, and W. G. Fahrenholtz, “Deposition and characterization of cerium oxide conversion coatings on aluminum alloy 7075-T6,” Surface and Coatings Technology, vol. 176, no. 3, pp. 349–356, 2003. View at Publisher · View at Google Scholar · View at Scopus
  21. S. Geng, P. Yu, M. J. O'Keefe, W. G. Fahrenholtz, and T. J. O'Keefe, “Screening study of spray solution parameters for depositing cerium-based conversion coatings on Al alloy 2024-T3,” Journal of Applied Electrochemistry, vol. 40, no. 3, pp. 551–559, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. B. R. W. Hinton and L. Wilson, “The corrosion inhibition of zinc with cerous chloride,” Corrosion Science, vol. 29, no. 8, pp. 967–985, 1989. View at Google Scholar · View at Scopus
  23. S. A. Hayes, P. Yu, T. J. O'Keefe, M. J. O'Keefe, and J. O. Stoffer, “The phase stability of cerium species in aqueous systems. I. E-pH diagram for the Ce-HClO4-H2O system,” Journal of the Electrochemical Society, vol. 149, no. 12, pp. C623–C630, 2002. View at Publisher · View at Google Scholar · View at Scopus
  24. F. H. Scholes, C. Soste, A. E. Hughes, S. G. Hardin, and P. R. Curtis, “The role of hydrogen peroxide in the deposition of cerium-based conversion coatings,” Applied Surface Science, vol. 253, no. 4, pp. 1770–1780, 2006. View at Publisher · View at Google Scholar · View at Scopus
  25. P. Zoltowski, “The error function for fitting of models to immittance data,” Journal of Electroanalytical Chemistry, vol. 178, no. 1, pp. 11–19, 1984. View at Google Scholar · View at Scopus
  26. J. R. Dygas and M. W. Breiter, “Variance of errors and elimination of outliers in the least squares analysis of impedance spectra,” Electrochimica Acta, vol. 44, no. 24, pp. 4163–4174, 1999. View at Google Scholar · View at Scopus
  27. C. S. Lin and S. K. Fang, “Formation of cerium conversion coatings on AZ31 magnesium alloys,” Journal of the Electrochemical Society, vol. 152, no. 2, pp. B54–B59, 2005. View at Publisher · View at Google Scholar · View at Scopus
  28. B. L. Treu, S. Joshi, W. R. Pinc, M. J. O'Keefe, and W. G. Fahrenholtz, “Characterization of localized surface states of Al 7075-T6 during deposition of cerium-based conversion coatings,” Journal of the Electrochemical Society, vol. 157, no. 8, pp. C282–C287, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. P. S. Jones, P. Yu, W. R. Pinc, M. J. O'Keefe, W. G. Fahrenholtz, and T. J. O'Keefe, “Spray deposition of cerium oxide-based conversion coatings on Al 2024-T3,” International Journal of Applied Ceramic Technology, vol. 5, no. 1, pp. 63–73, 2008. View at Publisher · View at Google Scholar · View at Scopus