Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2014, Article ID 564163, 11 pages
http://dx.doi.org/10.1155/2014/564163
Research Article

Corrosion of Steel in High-Strength Self-Compacting Concrete Exposed to Saline Environment

1Building and Construction Engineering Department, University of Technology, Alsinaa Street, 12906 Baghdad, Iraq
2Building Research Center, Royal Scientific Society (RSS), Al-Jubaiha, Amman 11941, Jordan
3Scientific Research Center, Applied Science Sector, Royal Scientific Society, Al-Jubaiha, Amman 11941, Jordan
4Conformity and Quality Institutional Company, Abdul Hameed Badees Street 45, Shmeisani, Amman 11121, Jordan

Received 9 January 2014; Accepted 6 April 2014; Published 23 April 2014

Academic Editor: Flavio Deflorian

Copyright © 2014 Hana A. Yousif et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Raupach and P. Schiesbl, “Macrocell sensor systems for monitoring of the corrosion risk of the reinforcement in concrete structures,” NDT & E International, vol. 34, no. 6, pp. 435–442, 2001. View at Publisher · View at Google Scholar · View at Scopus
  2. J. P. Broomfield, Corrosion of Steel in Concrete: Understanding, Investigation and Repair, Taylor & Francis, London, UK, 2nd edition, 2007.
  3. P. K. Mehta and P. J. Monteiro, Concrete: Microstructure, Properties, and Materials, McGraw-Hill, New York, NY, USA, 3rd edition, 2006.
  4. K. H. Khayat, “Workability, testing, and performance of self-consolidating concrete,” ACI Materials Journal, vol. 96, no. 3, pp. 346–353, 1999. View at Google Scholar · View at Scopus
  5. ACI Committee 222, “Corrosion of metals in concrete,” ACI Manual of Concrete Practice, Part 1, American Concrete Institute, Farmington Hills, Mich, USA, 2000. View at Google Scholar
  6. W. Zhu and P. J. M. Bartos, “Permeation properties of self-compacting concrete,” Cement and Concrete Research, vol. 33, no. 6, pp. 921–926, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. T. A. Saylev and R. Francois, “Quality of steel-concrete interface and corrosion of reinforcing steel,” Cement and Concrete Research, vol. 33, no. 9, pp. 1407–1415, 2003. View at Publisher · View at Google Scholar
  8. S. Assie, G. Escadeillas, and V. Waller, “Estimates of self-compacting concrete “potential” durability,” Construction and Building Materials, vol. 21, no. 10, pp. 1909–1917, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Yazici, “The effect of silica fume and high-volume class C fly ash on mechanical properties, chloride penetration and freeze–thaw resistance of self-compacting concrete,” Construction and Building Materials, vol. 22, no. 4, pp. 456–462, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Safiuddin, J. S. West, and K.A. Soudki, “Durability performance of self-consolidating concrete,” Journal of Applied Sciences Research, vol. 4, no. 12, pp. 1834–1840, 2008. View at Google Scholar
  11. M. A. Safan, “Performance of beams made of low-cost self-compacting concrete in an aggressive environment,” Acta Polytechnica, vol. 51, no. 5, pp. 120–130, 2011. View at Google Scholar · View at Scopus
  12. H. F. Dehwah, “Corrosion resistance of self-compacting concrete incorporated quarry dust powder, silica fume and fly ash,” Construction and Building Materials, vol. 37, pp. 277–282, 2012. View at Publisher · View at Google Scholar
  13. M. Uysal, K. Yilmaz, and M. Ipek, “The effect of mineral admixtures on mechanical properties, chloride ion permeability and impermeability of self-compacting concrete,” Construction and Building Materials, vol. 27, no. 1, pp. 263–270, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Hassan, M. Hossain, and M. Lachemi, “Corrosion resistance of self-consolidating concrete in full-scale reinforced beams,” Cement and Concrete Composites, vol. 31, no. 1, pp. 29–38, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. H. Yu, X. Shi, W. H. Hartt, and B. Lu, “Laboratory investigation of reinforcement corrosion initiation and chloride threshold content for self-compacting concrete,” Cement and Concrete Research, vol. 40, no. 10, pp. 1507–1516, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. American Society for Testing and Materials, ASTM C150: Standard Specification for Portland Cement, ASTM, Philadelphia, Pa, USA, 2002.
  17. American Society for Testing and Materials, ASTM C1240: Standard Specification for Silica Fume Used in Cementitious Mixtures, ASTM, Philadelphia, Pa, USA, 2005.
  18. American Society for Testing and Materials, ASTM C494: Standard Specification for Chemical Admixture for Concrete, ASTM, Philadelphia, Pa, USA, 2001.
  19. American Society for Testing and Materials, ASTM C33: Standard Specification for Concrete Aggregate, ASTM, Philadelphia, Pa, USA, 2003.
  20. The European Guidelines for Self Compacting Concrete, Specification, Production and Use, 2005.
  21. American Society for Testing and Materials, ASTM C143: Standard Test Method for Slump of Hydraulic Cement Concrete, ASTM, Philadelphia, Pa, USA, 2000.
  22. American Society for Testing and Materials, ASTM C1611: Standard Test Method for Slump Flow of Self-Consolidating Concrete, ASTM, Philadelphia, Pa, USA, 2005.
  23. American Society for Testing and Materials, ASTM C1621: Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring, ASTM, Philadelphia, Pa, USA, 2009.
  24. EFNARC, “Specification and guidelines for self-compacting concrete,” European Federation Dedicated to Specialist Construction Chemicals and Concrete Systems, 2002.
  25. American Society for Testing and Materials, ASTM C39/C39M: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM, Philadelphia, Pa, USA, 2001.
  26. American Society for Testing and Materials, ASTM C876: Standard Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete, ASTM, Philadelphia, Pa, USA, 1999.
  27. P. Rodriguez, E. Ramirez, and J. A. Gonzalez, “Methods for studying corrosion in reinforced concrete,” Magazine of Concrete Research, vol. 46, no. 167, pp. 81–90, 1994. View at Google Scholar · View at Scopus
  28. C. Andrade, J. Gulikers, R. Polder, and M. Raupach, “Half-cell potential measurements-potential mapping on reinforced concrete structures,” Materials and Structures, vol. 36, pp. 461–471, 2003. View at Google Scholar
  29. C. Andrade and C. Alonso, “Corrosion rate monitoring in the laboratory and on-site,” Construction and Building Materials, vol. 10, no. 5, pp. 315–328, 1996. View at Publisher · View at Google Scholar · View at Scopus
  30. M. Stern and A. Geary, “Electrochemical polarization-theoretical analysis of the shape of polarization curves,” Journal of the Electrochemical Society, vol. 104, no. 1, pp. 56–63, 1957. View at Google Scholar
  31. H. Arup, Corrosion of Reinforcement in Concrete Construction, Society of Chemical Industry, London, UK, 1983.
  32. R. D. Browne, M. P. Geoghegan, and A. F. Baker, “Analysis of structural condition from durability results,” in Corrosion of Reinforcement in Concrete Construction, A. P. Crane, Ed., Ellis Horwood, London, UK, 1983. View at Google Scholar
  33. C. L. Page and J. Havdahl, “Electrochemical monitoring of corrosion of steel in microsilica cement pastes,” Materials and Structures, vol. 18, no. 1, pp. 41–47, 1985. View at Publisher · View at Google Scholar · View at Scopus
  34. P. Lambert, C. L. Page, and P. R. W. Vassie, “Investigations of reinforcement corrosion. 2. Electrochemical monitoring of steel in chloride-contaminated concrete,” Materials and Structures, vol. 24, no. 5, pp. 351–358, 1991. View at Publisher · View at Google Scholar · View at Scopus
  35. J. A. Grubb, J. Blunt, C. P. Ostertag, and T. M. Devine, “Effect of steel microfibers on corrosion of steel reinforcing bars,” Cement and Concrete Research, vol. 37, no. 7, pp. 1115–1126, 2007. View at Publisher · View at Google Scholar · View at Scopus
  36. M. R. Rixom, Concrete Admixtures: Use and Applications, Construction Press, Lancaster, UK, 1977.
  37. P. C. Kreiger, “Plasticizers and dispersing admixtures,” in Proceedings of the Concrete International Admixtures (CI '80), pp. 1–17, London, UK, 1980.