Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2014 (2014), Article ID 595040, 7 pages
http://dx.doi.org/10.1155/2014/595040
Research Article

Corrosion Effects on the Strength Properties of Steel Fibre Reinforced Concrete Containing Slag and Corrosion Inhibitor

VIT University, Vellore, Tamil Nadu 632 014, India

Received 30 June 2014; Revised 24 October 2014; Accepted 25 October 2014; Published 17 November 2014

Academic Editor: Ramazan Solmaz

Copyright © 2014 Sivakumar Anandan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Otieno, H. Beushausen, and M. Alexander, “Effect of chemical composition of slag on chloride penetration resistance of concrete,” Cement and Concrete Composites, vol. 46, pp. 56–64, 2014. View at Publisher · View at Google Scholar · View at Scopus
  2. S. Teng, T. Y. D. Lim, and B. Sabet Divsholi, “Durability and mechanical properties of high strength concrete incorporating ultra fine ground granulated blast-furnace slag,” Construction and Building Materials, vol. 40, pp. 875–881, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. M. O'Connell, C. McNally, and M. G. Richardson, “Performance of concrete incorporating GGBS in aggressive wastewater environments,” Construction and Building Materials, vol. 27, no. 1, pp. 368–374, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. P. Pipilikaki, M. Katsioti, and J. L. Gallias, “Performance of limestone cement mortars in a high sulfates environment,” Construction and Building Materials, vol. 23, no. 2, pp. 1042–1049, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. C. D. Atiş and O. Karahan, “Properties of steel fiber reinforced fly ash concrete,” Construction and Building Materials, vol. 23, no. 1, pp. 392–399, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. S. Pavía and E. Condren, “Study of the durability of OPC versus GGBS concrete on exposure to silage effluent,” Journal of Materials in Civil Engineering, vol. 20, no. 4, pp. 313–320, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Oner and S. Akyuz, “An experimental study on optimum usage of GGBS for the compressive strength of concrete,” Cement and Concrete Composites, vol. 29, no. 6, pp. 505–514, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. Building Research Establishment, BRE Special Digest 1: Concrete in Aggressive Ground. Part 1: Assessing the Aggressive Chemical Environment, BRE, 2nd edition, 2003.
  9. ACI Committee, “Protection of metals in concrete against corrosion,” ACI 222R-01, American concrete Institute, Farmington Hills, Mich, USA, 2001. View at Google Scholar
  10. S. U. Al-Dulaijan, M. Maslehuddin, M. M. Al-Zahrani, A. M. Sharif, M. Shameem, and M. Ibrahim, “Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate,” Cement and Concrete Composites, vol. 25, no. 4-5, pp. 429–437, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. G. J. Osborne, “Durability of Portland blast-furnace slag cement concrete,” Cement and Concrete Composites, vol. 21, no. 1, pp. 11–21, 1999. View at Publisher · View at Google Scholar · View at Scopus
  12. R. S. Gollop and H. F. W. Taylor, “Microstructural and microanalytical studies of sulfate attack. V. Comparison of different slag blends,” Cement and Concrete Research, vol. 26, no. 7, pp. 1029–1044, 1996. View at Publisher · View at Google Scholar · View at Scopus
  13. V. Pavlík and S. Unčík, “The rate of corrosion of hardened cement pastes and mortars with additive of silica fume in acids,” Cement and Concrete Research, vol. 27, no. 11, pp. 1731–1745, 1997. View at Publisher · View at Google Scholar · View at Scopus
  14. N. de Belie, H. J. Verselder, B. de Blaere, D. van Nieuwenburg, and R. Verschoore, “Influence of the cement type on the resistance of concrete to feed acids,” Cement and Concrete Research, vol. 26, no. 11, pp. 1717–1725, 1996. View at Publisher · View at Google Scholar · View at Scopus
  15. E. K. Attiogbe and S. H. Rizkalla, “Response of concrete to sulfuric acid attack,” ACI Materials Journal, vol. 85, no. 6, pp. 481–488, 1988. View at Google Scholar · View at Scopus
  16. BIS (Bureau of Indian Standards), IS 383: Specification for Coarse and Finer Aggregates from Natural Sources for Concrete, Bureau of Indian Standards, New Delhi, India, 1970.
  17. BIS (Bureau of Indian Standards), IS 10262-2009: Concrete Mix Proportioning—Guidelines, New Delhi, India, 2009.