Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2016, Article ID 1025261, 9 pages
http://dx.doi.org/10.1155/2016/1025261
Research Article

Electrochemical and Microstructural Analysis of FeS Films from Acidic Chemical Bath at Varying Temperatures, pH, and Immersion Time

1Department of Mechanical Engineering, Faculty of Engineering and Applied Science, Memorial University of Newfoundland, St. John’s, NL, Canada A1B 3X5
2Department of Process Engineering, Faculty of Engineering and Applied Science, Memorial University of Newfoundland, St. John’s, NL, Canada A1B 3X5

Received 10 March 2016; Revised 30 June 2016; Accepted 21 July 2016

Academic Editor: Yu Zuo

Copyright © 2016 Ladan Khaksar et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [2 citations]

The following is the list of published articles that have cited the current article.

  • Ladan Khaksar, and John Shirokoff, “Effect of Elemental Sulfur and Sulfide on the Corrosion Behavior of Cr-Mo Low Alloy Steel for Tubing and Tubular Components in Oil and Gas Industry,” Materials, vol. 10, no. 4, pp. 430, 2017. View at Publisher · View at Google Scholar
  • Mehran Rafieazad, Jaffer Jaffer, Cong Cui, Xili Duan, and Ali Nasiri, “Nanosecond Laser Fabrication of Hydrophobic Stainless Steel Surfaces: The Impact on Microstructure and Corrosion Resistance,” Materials, vol. 11, no. 9, pp. 1577, 2018. View at Publisher · View at Google Scholar