Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2016, Article ID 5808372, 13 pages
http://dx.doi.org/10.1155/2016/5808372
Research Article

Experimental Investigation on Corrosion Effect on Mechanical Properties of Buried Metal Pipes

1School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, China
2School of Engineering, RMIT University, Melbourne, VIC 3001, Australia

Received 20 June 2016; Revised 5 August 2016; Accepted 8 August 2016

Academic Editor: Flavio Deflorian

Copyright © 2016 Yingbo Hou et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Li, B. Jiang, H. Zhao, and C. Tao, “Experimental study on internal corrosion of grey cast iron pipeline in water distribution,” Journal of Chemical Information and Modeling, vol. 53, article 160, 1989. View at Google Scholar
  2. J. M. Makar, “Preliminary analysis of failures in grey cast iron water pipes,” Engineering Failure Analysis, vol. 7, no. 1, pp. 43–53, 2000. View at Publisher · View at Google Scholar · View at Scopus
  3. National Water Commission Australia, National performance report 2009-10, http://archive.nwc.gov.au/__data/assets/pdf_file/0015/11265/NPR_urban.pdf.
  4. B. Rajani, S. McDonald, and G. Felio, “Water mains break data on different pipe materials for 1992 and 1993,” Report A-7019.1, National Research Council of Canada, Ottawa, Canada, 1995. View at Google Scholar
  5. H. Mohebbi and C. Q. Li, “Experimental investigation on corrosion of cast iron pipes,” International Journal of Corrosion, vol. 2011, Article ID 506501, 17 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. R. A. de Sena, I. N. Bastos, and G. M. Platt, “Theoretical and experimental aspects of the corrosivity of simulated soil solutions,” ISRN Chemical Engineering, vol. 2012, Article ID 103715, 6 pages, 2012. View at Publisher · View at Google Scholar
  7. C. Goulter, “An analysis of pipe breakage in urban water distribution networks,” Canadian Journal of Civil Engineering, vol. 12, no. 2, pp. 286–293, 1985. View at Publisher · View at Google Scholar
  8. M. L. Doleac, S. L. Lackey, and G. N. Bratton, “Prediction of time-to failure for buried cast iron pipe,” in Proceedings of the Annual Conference of the American Water Works Association (AWWA '80), pp. 31–38, Denver, Colo, USA, 1980. View at Scopus
  9. S. W. Dean Jr. and G. D. Grab, “Corrosion of carbon steel by concentrated sulfuric acid,” Materials Performance, vol. 24, no. 6, pp. 21–25, 1985. View at Google Scholar · View at Scopus
  10. D. K. O'Day, R. Weiss, S. Chiavari, and D. Blair, Water Main Evaluation for Rehabilitation/Replacement, American Water Works Association Research Foundation, Denver, Colo, USA, 1986.
  11. M. Randall-Smith, A. Russell, and R. Oliphant, Guidance Manual for the Structural Condition Assessment of the Trunk Mains, Water Research Centre, Swindon, UK, 1992.
  12. G. J. Kirmeyer, W. Richards, and C. D. Smith, An Assessment of Water Distribution Systems and Associated Research Needs, AWWA, 1994.
  13. L. Camarinopoulos, A. Chatzoulis, S. Frontistou-Yannas, and V. Kallidromitis, “Assessment of the time-dependent structural reliability of buried water mains,” Reliability Engineering and System Safety, vol. 65, no. 1, pp. 41–53, 1999. View at Publisher · View at Google Scholar · View at Scopus
  14. R. Sadiq, B. Rajani, and Y. Kleiner, “Probabilistic risk analysis of corrosion associated failures in cast iron water mains,” Reliability Engineering and System Safety, vol. 86, no. 1, pp. 1–10, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. Z. Panossian, N. L. de Almeida, R. M. F. de Sousa, G. de Souza Pimenta, and R. B. S. Marques, “Corrosion of carbon steel pipes and tanks by concentrated sulfuric acid: a review,” Corrosion Science, vol. 58, pp. 1–11, 2012. View at Publisher · View at Google Scholar
  16. L. A. Rossman, R. A. Brown, P. C. Singer, and J. R. Nuckols, “DBP formation kinetics in a simulated distribution system,” Water Research, vol. 35, no. 14, pp. 3483–3489, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. V. Chacker and J. D. Palmer, Eds., Effect of Soil Characteristic on Corrosion, ASTM Special Technical Publication, Ann Arbor, Mich, USA, 1989.
  18. T. M. Liu, Y. H. Wu, S. X. Luo, and C. Sun, “Effect of soil compositions on the electrochemical corrosion behavior of carbon steel in simulated soil solution. Einfluss der Erdbodenzusammensetzung auf das elektrochemische Verhalten von Kohlenstoffstählen in simulierten Erdbodenlösungen,” Materialwissenschaft und Werkstofftechnik, vol. 41, no. 4, pp. 228–233, 2010. View at Publisher · View at Google Scholar
  19. B. Rajani and Y. Kleiner, “Comprehensive review of structural deterioration of water mains: physically based models,” Urban Water, vol. 3, no. 3, pp. 151–164, 2001. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Li, R. Tang, J.-F. Liu, and J.-S. Liu, “The analysis of soil corrosion factors in long-distance oil pipeline,” Equipment Manufacturing, no. 9, pp. 31–33, 2012. View at Google Scholar
  21. C. Q. Li and S. T. Yang, “Stress intensity factors for high aspect ratio semi-elliptical internal surface cracks in pipes,” International Journal of Pressure Vessels and Piping, vol. 96-97, pp. 13–23, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. P. Marshall, The Residual Structural Properties of Cast Iron Pipes—Structural and Design Criteria for Linings for Water Mains, Water Industry Research, London, UK, 2001.
  23. S. K. Singh and A. K. Mukherjee, “Kinetics of mild steel corrosion in aqueous acetic acid solutions,” Journal of Materials Science and Technology, vol. 26, no. 3, pp. 264–269, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. H. Wu, T. M. Liu, S. X. Luo, and C. Sun, “Corrosion characteristics of Q235 steel in simulated Yingtan soil solutions,” Materialwissenschaft und Werkstofftechnik, vol. 41, no. 3, pp. 142–146, 2010. View at Publisher · View at Google Scholar
  25. ASTM E8M13, Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, 2013.
  26. ASTM-E1820, Standard Test Method for Measurement of Fracture Toughness, ASTM International, 2013.
  27. Z. Zhao, Y. Lu, and G. Sun, “Experimental measuring fracture toughness of Q235 steel by J integral,” Journal of Wuhan University of Technology, vol. 24, no. 4, pp. 111–112, 2002. View at Google Scholar
  28. D. Dong, X. Zhu, and X. Mei, “Abaqus Q235 simulation on fracture toughness of material Q235 based on flexibility determination method of Abaqus,” Computer Aided Engineering, vol. 21, no. 4, pp. 4–6, 2012. View at Google Scholar
  29. M. Wasim, C. Q. Li, D. J. Robert, and M. Mahmoodian, “Experimental investigation of factors influencing external corrosion of buried pipes,” in Proceedings of the 4th International Conference on Sustainability Construction Materials and Technologies (SCMT '16), Las Vegas, Nev, USA, August 2016.
  30. M. Yan, J. Wang, E. Han, and W. Ke, “Local environment under simulated disbonded coating on steel pipelines in soil solution,” Corrosion Science, vol. 50, no. 5, pp. 1331–1339, 2008. View at Publisher · View at Google Scholar · View at Scopus
  31. Z. Y. Liu, X. G. Li, C. W. Du, and Y. F. Cheng, “Local additional potential model for effect of strain rate on SCC of pipeline steel in an acidic soil solution,” Corrosion Science, vol. 51, no. 12, pp. 2863–2871, 2009. View at Publisher · View at Google Scholar · View at Scopus
  32. C. Q. Li, “Initiation of chloride-induced reinforcement corrosion in concrete structural members—experimentation,” ACI Structural Journal, vol. 98, no. 4, pp. 502–510, 2001. View at Google Scholar · View at Scopus
  33. F. Long, W. Zheng, C. Chen, Z. Xu, and Q. Han, “Influence of temperature, CO2 partial pressure, flow rate and pH value on uniform corrosion rate of X65 pipeline steel,” Corrosion and Protection, vol. 26, no. 7, pp. 290–294, 2005. View at Google Scholar
  34. ASTM G31-2012a, Standard Guide for Laboratory Immersion Corrosion Testing of Metals, ASTM International, 2012.
  35. L. L. Shreir, R. A. Jarman, and G. T. Burstein, Corrosion, Butterworth Heinemann, 2010.