Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2016 (2016), Article ID 9679134, 11 pages
http://dx.doi.org/10.1155/2016/9679134
Research Article

Adaptive Corrosion Protection System Using Continuous Corrosion Measurement, Parameter Extraction, and Corrective Loop

School of Engineering Science, Simon Fraser University, 8888 University Drive, Burnaby, BC, Canada V5A 1S6

Received 27 October 2015; Accepted 24 February 2016

Academic Editor: Michael J. Schütze

Copyright © 2016 Jasbir N. Patel et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Atkins and J. de Paula, Physical Chemistry for the Life Sciences, W. H. Freeman and Company, New York, NY, USA, 2005.
  2. M. G. Stewart and D. V. Rosowsky, “Structural safety and serviceability of concrete bridges subject to corrosion,” Journal of Infrastructure Systems, vol. 4, no. 4, pp. 146–155, 1998. View at Publisher · View at Google Scholar · View at Scopus
  3. J. S. Kong and D. M. Frangopol, “Life-cycle reliability-based maintenance cost optimization of deteriorating structures with emphasis on bridges,” Journal of Structural Engineering, vol. 129, no. 6, pp. 818–828, 2003. View at Publisher · View at Google Scholar · View at Scopus
  4. D. M. Frangopol, K.-Y. Lin, and A. C. Estes, “Reliability of reinforced concrete girders under corrosion attack,” Journal of Structural Engineering, vol. 123, no. 3, pp. 286–297, 1997. View at Publisher · View at Google Scholar · View at Scopus
  5. A. A. Torres-Acosta and M. Martínez-Madrid, “Residual life of corroding reinforced concrete structures in marine environment,” Journal of Materials in Civil Engineering, vol. 15, no. 4, pp. 344–353, 2003. View at Publisher · View at Google Scholar · View at Scopus
  6. D. M. Frangopol, K.-Y. Lin, and A. C. Estes, “Life-cycle cost design of deteriorating structures,” Journal of Structural Engineering, vol. 123, no. 10, pp. 1390–1401, 1997. View at Publisher · View at Google Scholar · View at Scopus
  7. C. G. Soares, Y. Garbatov, A. Zayed, and G. Wang, “Influence of environmental factors on corrosion of ship structures in marine atmosphere,” Corrosion Science, vol. 51, no. 9, pp. 2014–2026, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. H. P. Leckie and H. H. Uhlig, “Environmental factors affecting the critical potential for pitting in 18–8 stainless steel,” Journal of the Electrochemical Society, vol. 113, no. 12, pp. 1262–1267, 1966. View at Publisher · View at Google Scholar
  9. K. Suzumura and S.-I. Nakamura, “Environmental factors affecting corrosion of galvanized steel wires,” Journal of Materials in Civil Engineering, vol. 16, no. 1, pp. 1–7, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. J. J. S. Rodríguez, F. J. S. Hernández, and J. E. G. González, “The effect of environmental and meteorological variables on atmospheric corrosion of carbon steel, copper, zinc and aluminium in a limited geographic zone with different types of environment,” Corrosion Science, vol. 45, no. 4, pp. 799–815, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. L. V. Delinder, An Introduction to Corrosion, Corrosion Basics, NACE, Houston, Tex, USA, 1984.
  12. C. Chunan, “Corrosion electrochemistry,” Journal of Chemistry Industry, 1994. View at Google Scholar
  13. D. A. Vermilyea and C. S. Tedmon,, “A simple crevice corrosion theory,” Journal of the Electrochemical Society, vol. 117, no. 4, pp. 437–440, 1970. View at Publisher · View at Google Scholar
  14. Z. P. Bazant, “Physical model for steel corrosion in concrete sea structures—theory,” Journal of the Structural Division, vol. 105, no. 6, pp. 1137–1153, 1979. View at Google Scholar
  15. R. G. Kelly Jr., Electrochemical Techniques in Corrosion Science and Engineering, Mercel Dekker, Basel, Switzerland, 2003.
  16. G. A. Jacobson, Corrosion 101, NACE, Houston, Tex, USA, 2014, http://www.nace.org/.
  17. B. Wessling and J. Posdorfer, “Corrosion prevention with an organic metal (polyaniline): corrosion test results,” Electrochimica Acta, vol. 44, no. 12, pp. 2139–2147, 1999. View at Publisher · View at Google Scholar · View at Scopus
  18. E. Heitz, “Mechanistically based prevention strategies of flow-induced corrosion,” Electrochimica Acta, vol. 41, no. 4, pp. 503–509, 1996. View at Publisher · View at Google Scholar · View at Scopus
  19. C. Christodoulou, G. Glass, J. Webb, S. Austin, and C. Goodier, “Assessing the long term benefits of Impressed Current Cathodic Protection,” Corrosion Science, vol. 52, no. 8, pp. 2671–2679, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. H. Park, K. Y. Kim, and W. Choi, “Photoelectrochemical approach for metal corrosion prevention using a semiconductor photoanode,” Journal of Physical Chemistry B, vol. 106, no. 18, pp. 4775–4781, 2002. View at Publisher · View at Google Scholar · View at Scopus
  21. X. G. Zhang and E. M. Valeriote, “Galvanic protection of steel and galvanic corrosion of zinc under thin layer electrolytes,” Corrosion Science, vol. 34, no. 12, pp. 1957–1972, 1993. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Morcillo, R. Barajas, S. Feliu, and J. M. Bastidas, “A SEM study on the galvanic protection of zinc-rich paints,” Journal of Materials Science, vol. 25, no. 5, pp. 2441–2446, 1990. View at Publisher · View at Google Scholar · View at Scopus
  23. J. B. Bushman, Impressed Current Cathodic Protection System Design, Bushman & Associates, 2010.
  24. S. Szabó and I. Bakos, “Impressed current cathodic protection,” Corrosion Reviews, vol. 24, no. 1-2, pp. 39–62, 2006. View at Google Scholar · View at Scopus
  25. L. Y. Xu, X. Su, and Y. F. Cheng, “Effect of alternating current on cathodic protection on pipelines,” Corrosion Science, vol. 66, pp. 263–268, 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. S. D. Cramer, B. S. Covino Jr., S. J. Bullard et al., “Corrosion prevention and remediation strategies for reinforced concrete coastal bridges,” Cement and Concrete Composites, vol. 24, no. 1, pp. 101–117, 2002. View at Publisher · View at Google Scholar · View at Scopus
  27. R. W. Revie, Corrosion and Corrosion Control, John Wiley & Sons, Hoboken, NJ, USA, 2008.
  28. A. Oni, “Effects of cathodic overprotection on some mechanical properties of a dual-phase low-alloy steel in sea water,” Construction and Building Materials, vol. 10, no. 6, pp. 481–484, 1996. View at Publisher · View at Google Scholar · View at Scopus
  29. J. J. Chang, “A study of the bond degradation of rebar due to cathodic protection current,” Cement and Concrete Research, vol. 32, no. 4, pp. 657–663, 2002. View at Publisher · View at Google Scholar · View at Scopus
  30. S. Amami, C. Lemaitre, A. Laksimi, and S. Benmedakhene, “Characterization by acoustic emission and electrochemical impedance spectroscopy of the cathodic disbonding of Zn coating,” Corrosion Science, vol. 52, no. 5, pp. 1705–1710, 2010. View at Publisher · View at Google Scholar · View at Scopus
  31. P. Pedeferri, “Cathodic protection and cathodic prevention,” Construction and Building Materials, vol. 10, no. 5, pp. 391–402, 1996. View at Publisher · View at Google Scholar · View at Scopus
  32. Underground Storage Tank Branch and Mississippi Department of Environmental Quality, “Guidelines for the evaluation of underground storage tank cathodic protection systems,” July 2002, http://www.neiwpcc.org/neiwpcc_docs/MS%20DEQ%20Guidelines%20for%20the%20Evaluation%20of%20UST%20Cathodic%20Protection%20Systems.pdf.
  33. T. Kodama, K. Kimura, Y. Shinoda, and N. Mochizuki, “Determination of instant-off potential of cathodically protected reinforcing steel in concrete bridges located in coastal atmosphere,” in Proceedings of the CORROSION, NACE International, San Diego, Calif, USA, March 2006.
  34. L. V. Nielsen, K. V. Nielsen, B. Baumgarten, H. Breuning-Madsen, and H. Rosenberg, “AC induced corrosion in pipelines: detection, characterization and mitigation,” in Proceedings of the CORROSION, NACE International, New Orleans, La, USA, March-April 2004.
  35. F. Kajiyama and Y. Nakamura, “Effect of induced alternating current voltage on cathodically protected pipelines paralleling electric power transmission lines,” Corrosion, vol. 55, no. 2, pp. 200–205, 1999. View at Publisher · View at Google Scholar · View at Scopus
  36. J. Ansuini Frank and J. R. Dimond, “Field tests on an advanced cathodic protection coupon,” CORROSION/2005 paper 039, 2005. View at Google Scholar
  37. N. G. Thompson and J. A. Beavers, “Measurements of IR-drop free pipe-to-soil potentials on buried pipelines,” in The Measurement and Correction of Electrolyte Resistance in Electrochemical Tests, vol. 1056, p. 168, ASTM International, 1990. View at Google Scholar
  38. B. S. Jang and B. H. Oh, “Effects of non-uniform corrosion on the cracking and service life of reinforced concrete structures,” Cement and Concrete Research, vol. 40, no. 9, pp. 1441–1450, 2010. View at Publisher · View at Google Scholar · View at Scopus
  39. Y. Zhao, A. R. Karimi, H. S. Wong, B. Hu, N. R. Buenfeld, and W. Jin, “Comparison of uniform and non-uniform corrosion induced damage in reinforced concrete based on a Gaussian description of the corrosion layer,” Corrosion Science, vol. 53, no. 9, pp. 2803–2814, 2011. View at Publisher · View at Google Scholar · View at Scopus
  40. F. Mansfeld, “Tafel slopes and corrosion rates from polarization resistance measurements,” Corrosion, vol. 19, no. 10, pp. 397–402, 1973. View at Google Scholar
  41. Z. Shi, M. Liu, and A. Atrens, “Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation,” Corrosion Science, vol. 52, no. 2, pp. 579–588, 2010. View at Publisher · View at Google Scholar · View at Scopus
  42. A.-H. J. Al-Tayyib, Mohammed, and S. Khan, “Corrosion rate measurements of reinforcing steel in concrete by electrochemical techniques,” ACI Materials Journal, vol. 85, no. 3, pp. 172–177, 1988. View at Google Scholar
  43. E. McCafferty, “Validation of corrosion rates measured by the Tafel extrapolation method,” Corrosion Science, vol. 47, no. 12, pp. 3202–3215, 2005. View at Publisher · View at Google Scholar · View at Scopus
  44. F. Bentiss, M. Traisnel, L. Gengembre, and M. Lagrenée, “New triazole derivative as inhibitor of the acid corrosion of mild steel: electrochemical studies, weight loss determination, SEM and XPS,” Applied Surface Science, vol. 152, no. 3, pp. 237–249, 1999. View at Publisher · View at Google Scholar · View at Scopus