Influence of Hot-Dip Galvanised Coating Morphology on the Adhesion of Organic Coatings Depending on the Zinc Bath Pb Content and the Postgalvanising Cooling Method

<div>SEM micrographs of air-cooled sample surfaces: (a) Pb 1.2, (b) Pb 0.8, and (c) Pb 0.4.</div>

International Journal of Corrosion

fig4

Figure 4

Figure 4: Influence of Hot-Dip Galvanised Coating Morphology on the Adhesion of Organic Coatings Depending on the Zinc Bath Pb Content and the Postgalvanising Cooling Method 

Figure 4 | Influence of Hot-Dip Galvanised Coating Morphology on the Adhesion of Organic Coatings Depending on the Zinc Bath Pb Content and the Postgalvanising Cooling Method 