Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2018, Article ID 4853175, 15 pages
https://doi.org/10.1155/2018/4853175
Research Article

Effect of Deformation Structure and Annealing Temperature on Corrosion of Ultrafine-Grain Fe-Cr Alloy Prepared by Equal Channel Angular Pressing

Department of Mechanical Engineering, Doshisha University, Kyoto, Japan

Correspondence should be addressed to Muhammad Rifai; pj.ca.ahsihsod.liam@ammahumr

Received 16 January 2018; Accepted 28 February 2018; Published 11 April 2018

Academic Editor: Michael I. Ojovan

Copyright © 2018 Muhammad Rifai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Muhammad Rifai, Motohiro Yuasa, and Hiroyuki Miyamoto, “Effect of Deformation Structure and Annealing Temperature on Corrosion of Ultrafine-Grain Fe-Cr Alloy Prepared by Equal Channel Angular Pressing,” International Journal of Corrosion, vol. 2018, Article ID 4853175, 15 pages, 2018. https://doi.org/10.1155/2018/4853175.