Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2018, Article ID 4853175, 15 pages
https://doi.org/10.1155/2018/4853175
Research Article

Effect of Deformation Structure and Annealing Temperature on Corrosion of Ultrafine-Grain Fe-Cr Alloy Prepared by Equal Channel Angular Pressing

Department of Mechanical Engineering, Doshisha University, Kyoto, Japan

Correspondence should be addressed to Muhammad Rifai; pj.ca.ahsihsod.liam@ammahumr

Received 16 January 2018; Accepted 28 February 2018; Published 11 April 2018

Academic Editor: Michael I. Ojovan

Copyright © 2018 Muhammad Rifai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Z. Valiev, Y. Estrin, Z. Horita, T. G. Langdon, M. J. Zechetbauer, and Y. T. Zhu, “Producing bulk ultrafine-grained materials by severe plastic deformation,” JOM Journal of the Minerals, Metals and Materials Society, vol. 58, no. 4, pp. 33–39, 2006. View at Google Scholar
  2. R. Z. Valiev and T. G. Langdon, “Principles of equal-channel angular pressing as a processing tool for grain refinement,” Progress in Materials Science, vol. 51, no. 7, pp. 881–981, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. M. W. Grabski, “Mechanical properties of internal interfaces,” Le Journal de Physique Colloques, vol. 46, no. C4, pp. C4-567–C4-579, 1985. View at Publisher · View at Google Scholar
  4. R. Z. Valiev, V. Y. Gertsman, and O. A. Kaibyshev, “Grain boundary structure and properties under external influences,” Physica Status Solidi (a) – Applications and Materials Science, vol. 97, no. 1, pp. 11–56, 1986. View at Publisher · View at Google Scholar · View at Scopus
  5. K. Sieradzki and R. C. Newman, “A percolation model for passivation in stainless steels,” Journal of The Electrochemical Society, vol. 133, no. 9, pp. 1979-1980, 1986. View at Publisher · View at Google Scholar · View at Scopus
  6. S. Qian, R. C. Newman, R. A. Cottis, and K. Sieradzki, “Validation of a percolation model for passivation of Fe-Cr alloys: Two-dimensional computer simulations,” Journal of The Electrochemical Society, vol. 137, no. 2, pp. 435–439, 1990. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Rifai, H. Miyamoto, and H. Fujiwara, “Effects of strain energy and grain size on corrosion resistance of ultrafine grained Fe-20%Cr steels with extremely low C and N fabricated by ECAP,” International Journal of Corrosion, vol. 2015, Article ID 386865, 9 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. Z. J. Zheng, Y. Gao, Y. Gui, and M. Zhu, “Corrosion behaviour of nanocrystalline 304 stainless steel prepared by equal channel angular pressing,” Corrosion Science, vol. 54, no. 1, pp. 60–67, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. Y. Gui, Z. J. Zheng, and Y. Gao, “The bi-layer structure and the higher compactness of a passive film on nanocrystalline 304 stainless steel,” Thin Solid Films, vol. 599, pp. 64–71, 2016. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Pisarek, P. Kedzierzawski, T. Płociński, M. Janik-Czachor, and K. J. Kurzydłowski, “Characterization of the effects of hydrostatic extrusion on grain size, surface composition and the corrosion resistance of austenitic stainless steels,” Materials Characterization, vol. 59, no. 9, pp. 1292–1300, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Rifai, H. Miyamoto, and H. Fujiwara, “The Effect of ECAP Deformation Route on Microstructure, Mechanical and Electrochemical Properties of Low CN Fe-20% Cr Alloy,” Materials Sciences and Applications, vol. 5, no. 08, p. 568, 2014. View at Google Scholar
  12. S. S. Kumar, M. Vasanth, V. Singh, P. Ghosal, and T. Raghu, “An investigation of microstructural evolution in 304L austenitic stainless steel warm deformed by cyclic channel die compression,” Journal of Alloys and Compounds, vol. 699, pp. 1036–1048, 2017. View at Publisher · View at Google Scholar · View at Scopus
  13. S. V. Muley, A. N. Vidvans, G. P. Chaudhari, and S. Udainiya, “An assessment of ultra fine grained 316L stainless steel for implant applications,” Acta Biomaterialia, vol. 30, pp. 408–419, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. J. R. Weertman, “Hall-Petch strengthening in nanocrystalline metals,” Materials Science and Engineering: A Structural Materials: Properties, Microstructure and Processing, vol. 166, no. 1-2, pp. 161–167, 1993. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Rifai, H. Miyamoto, and H. Fujiwara, “Effect of ECAP deformation route on the degree of anisotropy of microstructure of extremely low CN Fe-20mass% Cr alloy,” Metals, vol. 4, no. 1, pp. 55–63, 2014. View at Google Scholar
  16. A. Belyakov, T. Sakai, H. Miura, R. Kaibyshev, and K. Tsuzaki, “Continuous recrystallization in austenitic stainless steel after large strain deformation,” Acta Materialia, vol. 50, no. 6, pp. 1547–1557, 2002. View at Publisher · View at Google Scholar · View at Scopus
  17. H. P. Leckie and H. H. Uhlig, “Environmental factors affecting the critical potential for pitting in 18–8 stainless steel,” Journal of The Electrochemical Society, vol. 113, no. 12, pp. 1262–1267, 1966. View at Publisher · View at Google Scholar
  18. J. Horvath and H. H. Uhlig, “Critical potentials for pitting corrosion of Ni, Cr-Ni, Cr-Fe, and related stainless steels,” Journal of the Electrochemical Society, vol. 115, no. 8, pp. 791–795, 1968. View at Google Scholar
  19. G. S. Frankel, “Pitting corrosion of metals: a review of the critical factors,” Journal of the Electrochemical Society, vol. 145, no. 6, pp. 2186–2198, 1998. View at Publisher · View at Google Scholar · View at Scopus
  20. R. K. Gupta and N. Birbilis, “The influence of nanocrystalline structure and processing route on corrosion of stainless steel: A review,” Corrosion Science, vol. 92, pp. 1–15, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. M. Naka, K. Hashimoto, and T. Masumoto, “Effect of metalloidal elements on corrosion resistance of amorphous iron-chromium alloys,” Journal of Non-Crystalline Solids, vol. 28, no. 3, pp. 403–413, 1978. View at Publisher · View at Google Scholar · View at Scopus
  22. R. K. Gupta, R. K. S. Raman, C. C. Koch, and B. S. Murty, “Effect of nanocrystalline structure on the corrosion of a Fe20Cr alloy,” International Journal of Electrochemical Science, vol. 8, no. 5, pp. 6791–6806, 2013. View at Google Scholar · View at Scopus
  23. R. S. Raman, R. K. Gupta, and C. C. Koch, “Resistance of nanocrystalline vis-à-vis microcrystalline Fe-Cr alloys to environmental degradation and challenges to their synthesis,” Philosophical Magazine, vol. 90, no. 23, pp. 3233–3260, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. R. K. Gupta, R. K. Singh Raman, and C. C. Koch, “Electrochemical characteristics of nano and microcrystalline Fe–Cr alloys,” Journal of Materials Science, vol. 47, no. 16, pp. 6118–6124, 2012. View at Publisher · View at Google Scholar · View at Scopus
  25. R. K. Gupta, R. K. Singh Raman, and C. C. Koch, “Fabrication and oxidation resistance of nanocrystalline Fe10Cr alloy,” Journal of Materials Science, vol. 45, no. 17, pp. 4884–4888, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. K. Asami, K. Hashimoto, and S. Shimodaira, “An XPS study of the passivity of a series of iron-chromium alloys in sulphuric acid,” Corrosion Science, vol. 18, no. 2, pp. 151–160, 1978. View at Publisher · View at Google Scholar · View at Scopus
  27. J. S. Noh, N. J. Laycock, W. Gao, and D. B. Wells, “Effects of nitric acid passivation on the pitting resistance of 316 stainless steel,” Corrosion Science, vol. 42, no. 12, pp. 2069–2084, 2000. View at Publisher · View at Google Scholar · View at Scopus
  28. C. O. Olsson and D. Landolt, “Passive films on stainless steels—chemistry, structure and growth,” Electrochimica Acta, vol. 48, no. 9, pp. 1093–1104, 2003. View at Publisher · View at Google Scholar · View at Scopus
  29. A. R. Brooks, C. R. Clayton, K. Doss, and Y. C. Lu, “On the role of Cr in the passivity of stainless steel,” Journal of The Electrochemical Society, vol. 133, no. 12, pp. 2459–2464, 1986. View at Publisher · View at Google Scholar
  30. I. O. Wallinder, J. Lu, S. Bertling, and C. Leygraf, “Release rates of chromium and nickel from 304 and 316 stainless steel during urban atmospheric exposure-A combined field and laboratory study,” Corrosion Science, vol. 44, no. 10, pp. 2303–2319, 2002. View at Publisher · View at Google Scholar · View at Scopus
  31. T. P. Hoar, “The production and breakdown of the passivity of metals,” Corrosion Science, vol. 7, no. 6, pp. 341–355, 1967. View at Publisher · View at Google Scholar · View at Scopus
  32. D. E. Williams, R. C. Newman, Q. Song, and R. G. Kelly, “Passivity breakdown and pitting corrosion of binary alloys,” Nature, vol. 350, no. 6315, pp. 216–219, 1991. View at Publisher · View at Google Scholar · View at Scopus
  33. R. A. Andrievski, “Review stability of nanostructured materials,” Journal of Materials Science, vol. 38, no. 7, pp. 1367–1375, 2003. View at Publisher · View at Google Scholar · View at Scopus
  34. C. C. Koch, “Structural nanocrystalline materials: an overview,” Journal of Materials Science, vol. 42, no. 5, pp. 1403–1414, 2007. View at Publisher · View at Google Scholar · View at Scopus
  35. Y. R. Kolobov, G. P. Grabovetskaya, M. B. Ivanov, A. P. Zhilyaev, and R. Z. Valiev, “Grain boundary diffusion characteristics of nanostructured nickel,” Scripta Materialia, vol. 44, no. 6, pp. 873–878, 2001. View at Publisher · View at Google Scholar · View at Scopus
  36. R. Würschum, S. Herth, and U. Brossmann, “Diffusion in nanocrystalline metals and alloys—a status report,” Advanced Engineering Materials, vol. 5, no. 5, pp. 365–372, 2003. View at Publisher · View at Google Scholar · View at Scopus