Experimental Investigation into Corrosion Effect on Mechanical Properties of High Strength Steel Bars under Dynamic Loadings

Table 5

Comparison of the results from J-C model and values from test.

Specimen	Test	J-C	Error	Test	J-C	Error
	(MPa)	(MPa)	(%)	(Mpa)	(MPa)	%
HS00-2	573.47	599.62	4.6	696.21	687.68	−1.2
HS00-10	592.31	620.77	4.8	706.9	699.01	−1.1
HS00-50	611.66	636.93	4.1	727.78	710.34	−2.4
HS05-10	562.26	558.49	−0.7	664.63	622.86	−6.3
HS15-10	503.18	478.34	−4.9	580.09	591.58	2.0
HS20-10	479.25	456.46	−4.8	557.17	552.93	−0.8
HS25-10	444.1	456.46	2.8	519.99	521.10	0.2
HS10-2	496.56	517.48	4.3	611.66	612.01	0.1
HS10-10	522.54	546.05	4.5	625.92	622.33	−0.6
HS10-50	528.14	565.95	7.2	644.77	632.65	−1.9

Note. (1) Error = (Value from the model − value from tests)/value from tests.