In the article entitled “Application of a New Method in Identifying the Sludge Deposits from Refineries and Gas Plants: A Case of Laboratory-Based Study” [1], Rasha A. Al-Ghamdi was missing from the authors’ list. Rasha A. Al-Ghamdi performed the separation of the inorganic materials part (non-hydrocarbon) from the hydrocarbon part for the complex sample such as sludge deposit collected from the NG line, where the methylene chloride was insoluble. Rasha A. Al-Ghamdi also conducted the materials characterization of hydrocarbon parts using both the thermal gravimetric analysis and gas chromatography mass spectrometry techniques. Additionally, Rasha A. Al-Ghamdi interpreted the results, e.g., type of hydrocarbon (i.e., hydrocarbon type was diesel with the C10–C27) and the amount of inorganic compound, water, and hydrocarbon content (3 wt% of inorganic compound, 25wt% of water, and 72wt% of hydrocarbon content). The corrected authors’ list is shown above.
Corrigendum | Open Access
Corrigendum to “Application of a New Method in Identifying the Sludge Deposits from Refineries and Gas Plants: A Case of Laboratory-Based Study”
Received22 May 2018
Accepted20 Jun 2018
Published01 Aug 2018
References
H. Sitepu and S. R. Zaidi, “Application of a new method in identifying the sludge deposits from refineries and gas plants: a case of laboratory-based study,” International Journal of Corrosion, Article ID 9047545, 7 pages, 2017.
View at: Publisher Site | Google Scholar
Copyright
Copyright © 2018 Husin Sitepu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.