Table of Contents
International Journal of Carbohydrate Chemistry
Volume 2015 (2015), Article ID 381242, 8 pages
http://dx.doi.org/10.1155/2015/381242
Research Article

Total Chlorine-Free Bleaching of Populus deltoides Kraft Pulp by Oxone

1Department of Pulp & Paper Industries, Faculty of Wood & Paper Engineering, Gorgan University of Agricultural Sciences and Natural Resources, Gorgan 49175-487, Iran
2Young Researchers and Elite Club, Islamic Azad University, Karaj Branch, Karaj 31485-313, Iran

Received 19 May 2015; Revised 30 July 2015; Accepted 30 July 2015

Academic Editor: J. F. Vliegenthart

Copyright © 2015 Mohsen Miri et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. López, M. J. Díaz, M. E. Eugenio, J. Ariza, A. Rodríguez, and L. Jiménez, “Optimization of hydrogen peroxide in totally chlorine free bleaching of cellulose pulp from olive tree residues,” Bioresource Technology, vol. 87, no. 3, pp. 255–261, 2003. View at Publisher · View at Google Scholar · View at Scopus
  2. B. Bujanovic, R. S. Reiner, S. A. Ralph, and R. H. Atalla, “Polyoxometalate delignification of birch kraft pulp and effect on residual lignin,” Journal of Wood Chemistry and Technology, vol. 31, no. 2, pp. 121–141, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. C. W. Dence and D. W. Reeve, Pulp Bleaching: Principles and Practice, Tappi Press, Atlanta, Ga, USA, 1996.
  4. E. Sjostrom, Wood Chemistry, Fundamentals and Applications, 1981.
  5. A. J. Ragauskas, K. M. Poll, and A. J. Cesternino, “Effect of xylanase pretreatment procedures for non-chlorine bleaching,” Technical Paper Series 482, Institute of Paper Science and Technology, Atlanta, Ga, USA, 1993. View at Google Scholar
  6. N. Yaqoob, K. Stack, and K. L. Nguyen, “TCF bleaching of Eucalypt kraft pulp with Oxone,” Appita Journal, vol. 63, no. 5, pp. 381–386, 2010. View at Google Scholar · View at Scopus
  7. E. L. Springer, “Delignification of wood and kraft pulp with peroxymonophosphoric acid,” Journal of Pulp and Paper Science, vol. 23, no. 12, pp. 582–584, 1997. View at Google Scholar · View at Scopus
  8. J. Bouchard, C. Maine, R. M. Berry, and D. S. Argyropoulos, “Kraft pulp bleaching using dimethyldioxirane: stability of the oxidants,” Canadian Journal of Chemistry, vol. 74, no. 2, pp. 232–237, 1996. View at Publisher · View at Google Scholar · View at Scopus
  9. DuPont Oxone, Monopersulfate Compound General Technical Attributes, DuPont, 2008, http://www.oxone.dupont.com/.
  10. E. L. Springer, “Potential uses for Peroxymonosulfste in pulping and bleaching,” in Proceedings of the 1989 and 1990 AIChe Forest Products Symposium : November 5–10, 1989, San Francisco, California; November 11–16, 1990, Chicago, Illinois. Atlanta, GA, pp. 113–120, TAPPI press, Atlanta, Ga, USA, 1992. View at Google Scholar
  11. E. L. Springer and J. D. McSweeny, “Bleaching kraft pulps with peroxymonosulfate and oxygen,” in Proceedings of the TAPPI Pulping Conference, pp. 453–457, 1993.
  12. M. N. Dafchahi and H. Resalati, “Evaluation of pre-hydrolyzed soda-AQ dissolving pulp from Populus deltoides using an ODED bleaching sequence,” BioResources, vol. 7, no. 3, pp. 3283–3292, 2012. View at Google Scholar · View at Scopus
  13. C. A. P. Primo and M. G. V. S. Carvalho, “Acid treatment applied to portuguese Eucalyptus globulus kraft pulp before bleaching: effect on quality and hexenuronic acids and metals contents,” in Proceedings of the 28th Eucepa Conference, pp. 281–283, Lisboa, Portugal, 2003.
  14. N. Yaqoob, K. Stack, K. J. Cheema, B. Mateen, and I. Rehman, “Oxidative delignification and bleaching of alkaline sulphite-anthraquinone wheat straw pulp,” Asian Journal of Chemistry, vol. 23, no. 7, pp. 2845–2851, 2011. View at Google Scholar · View at Scopus
  15. T. Vuorinen, J. Buchert, A. Teleman, and P. Fagerstrom, “Selective hydrolysis of hexenuronic acid groups and its application in ECF and TCF bleaching of Kraft pulps,” in Proceedings of the International Pulp Bleaching Conference, p. 43, TAPPI Press, Washington, DC, USA, April 1996.
  16. D. V. Evtuguin, A. I. D. Daniel, and C. Pascoal Neto, “Determination of hexenuronic acid and residual lignin in pulps by UV spectroscopy in cadoxen solutions,” Journal of Pulp and Paper Science, vol. 28, no. 6, pp. 189–192, 2002. View at Google Scholar · View at Scopus
  17. G. X. Pan, C. Thomson, and G. J. Leary, “Bleaching of high-yield lignocellulosic pulps with peroxygen reagents,” in Oxidative Delignification Chemistry, vol. 785 of ACS Symposium Series, chapter 9, pp. 163–181, ACS, Washington, DC, USA, 2001. View at Publisher · View at Google Scholar
  18. T. Rosenau, A. Potthast, P. Kosma, H. U. Suess, and N. Nimmerfroh, “Chromophores in aged hardwood pulp—their structure and degradation potential,” Holzforschung, vol. 61, pp. 656–661, 2007. View at Google Scholar
  19. P. Bajpai, “Environmentally benign approaches for pulp bleaching,” in Developments in Environmental Management, Elsevier, Amsterdam, The Netherlands, 1st edition, 2005. View at Google Scholar
  20. N. Yaqoob, I. Rehman, K. Chema, S. Hameed, and B. Mateen, “Environmental benign TCF bleaching sequences for AS/AQ wheat straw pulp,” United States Patent, Patent no: US 8, 080, 129 b2, 2011.
  21. H. U. Suess, K. Schmidt, and B. Hopf, “How to improve brightness stability of ECF bleached softwood and hardwood kraft pulp,” in Proceedings of the 58th Appita Annual Conference and Exhibition Incorporating the Pan Pacific Conference, pp. 493–499, Canberra, Australia, April 2004.
  22. J. L. Colodette, J. L. Gomide, D. L. Júnior, and C. Pedrazzi, “Effect of pulp delignification degree on fiber line performance and bleaching effluent load,” BioResources, vol. 2, no. 2, pp. 223–234, 2007. View at Google Scholar · View at Scopus
  23. P. E. G. Loureiro, E. F. Domingues, D. V. Evtuguin, and M. G. V. S. Carvalho, “ECF bleaching with a final hydrogen peroxide stage: impact on the chemical composition of Eucalyptus globulus kraft pulps,” BioResources, vol. 5, no. 4, pp. 2567–2580, 2010. View at Google Scholar · View at Scopus
  24. M. Ek, G. Gellerstedt, and G. Henriksson, Pulp and Paper Chemistry and Technology, Volume 2, Walter de Gruyter, Bremen, Germany, 1st edition, 2009.
  25. F. Zeinaly, J. Shakhes, M. D. Firozabadi, and A. Shakeri, “Hydrogen peroxide bleaching of CMP pulp using magnesium hydroxide,” BioResources, vol. 4, no. 4, pp. 1409–1416, 2009. View at Google Scholar · View at Scopus
  26. R. Berggren, Cellulose degradation in pulp fibers studied as changes in molar mass distributions [Ph.D. thesis], Department of Fibre and Polymer Technology, Royal Institute of Technology, Stockholm, Sweden, 2003.
  27. F. S. Chakar, L. Allison, A. J. Ragauskas, T. J. McDonough, and U. Sezgi, “Influence of hexenuronic acids on U.S. bleaching operations,” TAPPI Journal, vol. 83, no. 11, article 62, 2000. View at Google Scholar · View at Scopus