Table of Contents Author Guidelines Submit a Manuscript
International Journal of Chemical Engineering
Volume 2010 (2010), Article ID 106461, 28 pages
http://dx.doi.org/10.1155/2010/106461
Review Article

Recent Advances in Heat Transfer Enhancements: A Review Report

Thermal Engineering and Desalination Technology Department, King Abdulaziz University, P.O. Box 80204 Jeddah 21589, Saudi Arabia

Received 25 March 2010; Revised 25 June 2010; Accepted 25 June 2010

Academic Editor: Alfons Baiker

Copyright © 2010 M. Siddique et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. E. Bergles, Handbook of Heat Transfer, McGraw-Hill, New York, NY, USA, 3rd edition, 1998.
  2. A. E. Bergles, “The implications and challenges of enhanced heat tranfer for the chemical process industries,” Chemical Engineering Research and Design, vol. 79, no. 4, pp. 437–444, 2001. View at Publisher · View at Google Scholar · View at Scopus
  3. E. I. Nesis, A. F. Shatalov, and N. P. Karmatskii, “Dependence of the heat transfer coefficient on the vibration amplitude and frequency of a vertical thin heater,” Journal of Engineering Physics and Thermophysics, vol. 67, no. 1-2, pp. 696–698, 1994. View at Publisher · View at Google Scholar · View at Scopus
  4. J. K. Hagge and G. H. Junkhan, “Experimental study of a method of mechanical augmentation of convective heat transfer in air,” Tech. Rep. HTL3, ISU-ERI-Ames-74158, Iowa State University, Amsterdam, The Netherlands, 1975. View at Google Scholar
  5. H. M. Li, K. S. Ye, Y. K. Tan, and S. J. Deng, “Investigation on tube-side flow visualization, friction factors and heat transfer characteristics of helical-ridging tubes,” in Proceedings of the 7th International Heat Transfer Conference, vol. 3, pp. 75–80, Munich, Germany, 1982. View at Scopus
  6. J. A. Kohler and K. E. Staner, “High performance heat transfer surfaces,” in Handbook of Applied Thermal Design, E. C. Guyer, Ed., pp. 7.37–7.49, McGraw-Hill, New York, NY, USA, 1984. View at Google Scholar
  7. B. Arman and T. J. Rabas, “Disruption share effects on the performance of enhanced tubes with the separation and reattachment mechanism,” in Proceedings of the 28th National Heat Transfer Conference and Exhibition, vol. 202, pp. 67–75, August 1992. View at Scopus
  8. A. Amiri and K. Vafai, “Analysis of dispersion effects and non-thermal equilibrium, non-Darcian, variable porosity incompressible flow through porous media,” International Journal of Heat and Mass Transfer, vol. 37, no. 6, pp. 939–954, 1994. View at Google Scholar · View at Scopus
  9. A. A. Mohamad, “Heat transfer enhancements in heat exchangers fitted with porous media. Part I: constant wall temperature,” International Journal of Thermal Sciences, vol. 42, no. 4, pp. 385–395, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. Ding, H. Alias, D. Wen, and R. A. Williams, “Heat transfer of aqueous suspensions of carbon nanotubes (CNT nanofluids),” International Journal of Heat and Mass Transfer, vol. 49, no. 1-2, pp. 240–250, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. A.-R. A. Khaled and K. Vafai, “Flow and heat transfer inside thin films supported by soft seals in the presence of internal and external pressure pulsations,” International Journal of Heat and Mass Transfer, vol. 45, no. 26, pp. 5107–5115, 2002. View at Publisher · View at Google Scholar · View at Scopus
  12. A.-R. A. Khaled and K. Vafai, “Cooling enhancements in thin films supported by flexible complex seals in the presence ultrafine suspensions,” Journal of Heat Transfer, vol. 125, no. 5, pp. 916–925, 2003. View at Publisher · View at Google Scholar · View at Scopus
  13. A.-R. A. Khaled, “The role of expandable thermal systems in improving performance of thermal devices,” International Journal of Thermal Sciences, vol. 46, no. 4, pp. 413–418, 2007. View at Publisher · View at Google Scholar · View at Scopus
  14. A.-R. A. Khaled, “Heat transfer analysis through solar and rooted fins,” Journal of Heat Transfer, vol. 130, no. 7, Article ID 074503, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. W. M. Kays, “Pin-fin heat-exchanger surfaces,” Journal of Heat Transfer, vol. 77, pp. 471–483, 1955. View at Google Scholar
  16. D. O. Kern and A. D. Kraus, Extended Surface Heat Transfer, McGraw-Hill, New York, NY, USA, 1972.
  17. A. D. Kraus, “Sixty-five years of extended surface technology (1922–1987),” Applied Mechanical Review, vol. 41, pp. 621–364, 1988. View at Google Scholar
  18. P. J. Schenider, Conduction Heat Transfer, Addison Wesley, Reading, Mass, USA, 1955.
  19. A. D. Kraus, A. Aziz, and J. R. Welty, Extended Surface Heat Transfer, John Wiley & Sons, New York, NY, USA, 2001.
  20. S. Kakaç and H. Liu, Heat Exchangers: Selection, Rating, and Thermal Design, CRC Press, Boca Raton, Fla, USA, 2001.
  21. N. Sahiti, A. Lemouedda, D. Stojkovic, F. Durst, and E. Franz, “Performance comparison of pin fin in-duct flow arrays with various pin cross-sections,” Applied Thermal Engineering, vol. 26, no. 11-12, pp. 1176–1192, 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. J. C. Choi and S. D. Kim, “Heat-transfer characteristics of a latent heat storage system using MgCl2· 6H2O,” Energy, vol. 17, no. 12, pp. 1153–1164, 1992. View at Google Scholar · View at Scopus
  23. B. Horbaniuc, G. Dumitrascu, and A. Popescu, “Mathematical models for the study of solidification within a longitudinally finned heat pipe latent heat thermal storage system,” Energy Conversion and Management, vol. 40, no. 15, pp. 1765–1774, 1999. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. Zhang and A. Faghri, “Heat transfer enhancement in latent heat thermal energy storage system by using the internally finned tube,” International Journal of Heat and Mass Transfer, vol. 39, no. 15, pp. 3165–3173, 1996. View at Publisher · View at Google Scholar · View at Scopus
  25. F. Agyenim, P. Eames, and M. Smyth, “A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins,” Solar Energy, vol. 83, no. 9, pp. 1509–1520, 2009. View at Publisher · View at Google Scholar · View at Scopus
  26. A. Nuntaphan, T. Kiatsiriroat, and C. C. Wang, “Air side performance at low Reynolds number of cross-flow heat exchanger using crimped spiral fins,” International Communications in Heat and Mass Transfer, vol. 32, no. 1-2, pp. 151–165, 2005. View at Publisher · View at Google Scholar · View at Scopus
  27. R. M. Manglik and A. E. Bergles, “Swirl flow heat transfer and pressure drop with twisted-tape inserts,” Advances in Heat Transfer, vol. 36, article 183, 2002. View at Google Scholar
  28. A. Alebrahim and A. Bejan, “Constructal trees of circular fins for conductive and convective heat transfer,” International Journal of Heat and Mass Transfer, vol. 42, no. 19, pp. 3585–3597, 1999. View at Publisher · View at Google Scholar · View at Scopus
  29. M. Almogbel and A. Bejan, “Cylindrical trees of pin fins,” International Journal of Heat and Mass Transfer, vol. 43, no. 23, pp. 4285–4297, 2000. View at Google Scholar · View at Scopus
  30. A.-R. A. Khaled, “Heat transfer enhancement in hairy fin systems,” Applied Thermal Engineering, vol. 27, no. 1, pp. 250–257, 2007. View at Publisher · View at Google Scholar · View at Scopus
  31. A.-R. A. Khaled, “Maximizing heat transfer through joint fin systems,” Journal of Heat Transfer, vol. 128, no. 2, pp. 203–206, 2006. View at Publisher · View at Google Scholar · View at Scopus
  32. A.-R. A. Khaled, “Analysis of heat transfer through Bi-convection fins,” International Journal of Thermal Sciences, vol. 48, no. 1, pp. 122–132, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. S. Kiwan and M. A. Al-Nimr, “Using porous fins for heat transfer enhancement,” Journal of Heat Transfer, vol. 123, no. 4, pp. 790–795, 2001. View at Publisher · View at Google Scholar · View at Scopus
  34. A.-R. A. Khaled, “Investigation of heat transfer enhancement using permeable fins,” Journal of Heat Transfer, vol. 132, Article ID 034503, 2010. View at Publisher · View at Google Scholar · View at Scopus
  35. S. Al-Fahed, L. M. Chamra, and W. Chakroun, “Pressure drop and heat transfer comparison for both microfin tube and twisted-tape inserts in laminar flow,” Experimental Thermal and Fluid Science, vol. 18, no. 4, pp. 323–333, 1998. View at Publisher · View at Google Scholar · View at Scopus
  36. B. Shome and M. K. Jensen, “Experimental investigation of laminar flow and heat transfer in internally finned tubes,” Journal of Enhanced Heat Transfer, vol. 4, no. 1, pp. 53–70, 1996. View at Google Scholar · View at Scopus
  37. W. E. Hilding and C. H. Coogan, “Heat transfer and pressure loss measurements in internally finned tubes,” in Proceedings of ASME Symposium on Air Cooled Heat Exchangers, pp. 57–85, 1964.
  38. E. K. Kalinin and S. A. Yarkho, “The effect of Reynolds and Prandtl numbers on the effectiveness of heat transfer enhancement in pipes,” Inzhenerno-Fizicheskii Zhurnal, vol. 11, no. 4, pp. 426–431, 1966. View at Google Scholar
  39. Y. A. Vasilchenko and M. S. Barbaritskaya, “Resistance with non-isothermal fluid flow in tubes with longitudinal fins,” Thermal Engineering, vol. 16, no. 1, pp. 28–35, 1969. View at Google Scholar
  40. Y. A. Vasilchenko and M. S. Barbaritskaya, “Heat transfer in tubes with longitudinal fins,” Thermal Engineering, vol. 16, no. 1, pp. 105–109, 1969. View at Google Scholar
  41. A. E. Bergles, G. S. Brown, and W. D. Sinder, “Heat- transfer performance of internally finned tubes,” ASME Paper no. 71-HT-31, pp. 1–7, 1971. View at Scopus
  42. A. P. Watkinson, D. L. Miletti, and P. Tarassoff, “Turbulent heat transfer and pressure drop in internally finned tubes,” AIChE Symposium Series, vol. 69, no. 131, pp. 94–103, 1973. View at Google Scholar
  43. A. P. Watkinson, D. L. Miletti, and G. R. Kubanek, “Heat transfer and pressure drop of internally finned tubes in turbulent air flow,” ASHRAE Transactions, vol. 81, part 1, pp. 330–347, 1975, paper no. 2347. View at Google Scholar
  44. T. C. Carnavos, “Cooling air in turbulent flow with internally finned tubes,” in Proceedings of the 17th National Heat Transfer Conference, 1977, AIChE paper 4.
  45. T. C. Carnavos, “Heat transfer performance of internally finned tubes in turbulent flow,” Heat Transfer Engineering, vol. 1, no. 4, pp. 32–37, 1980. View at Google Scholar · View at Scopus
  46. R. D. Armstrong and A. E. Bergles, “Enhanced ceramic tubes for high temperature waste heat recovery,” Heat Transfer Laboratory Report HTL-1, Rensselaer Polytechnic Institute, 1989. View at Google Scholar
  47. M. B. Pate, Z. H. Ayub, and J. Kohler, “Heat exchangers for the air-conditioning and refrigeration industry,” in Compact Heat Exchangers—A Festschrift for A. L. London, R. K. Shah, A. D. Kraus, and D. Metzger, Eds., pp. 567–590, Hemisphere, Washington, DC, USA, 1990. View at Google Scholar
  48. T. S. Ravigururajan and T. J. Rabas, “Turbulent flow in integrally enhanced tubes, Part 1: comprehensive review and database development,” Heat Transfer Engineering, vol. 17, no. 2, pp. 19–29, 1996. View at Google Scholar · View at Scopus
  49. J. B. Copetti, M. H. Macagnan, D. De Souza, and R. de Césaro Oliveski, “Experiments with micro-fin tube in single phase,” International Journal of Refrigeration, vol. 27, no. 8, pp. 876–883, 2004. View at Publisher · View at Google Scholar · View at Scopus
  50. L. J. Brognaux, R. L. Webb, L. M. Chamra, and B. Y. Chung, “Single-phase heat transfer in micro-fin tubes,” International Journal of Heat and Mass Transfer, vol. 40, no. 18, pp. 4345–4357, 1997. View at Google Scholar · View at Scopus
  51. L. M. Schlager, M. B. Pate, and A. E. Bergles, “Heat transfer and pressure drop during evaporation and condensation of R22 in horizontal micro-fin tubes,” International Journal of Refrigeration, vol. 12, no. 1, pp. 6–14, 1989. View at Google Scholar · View at Scopus
  52. J. C. Khanpara, A. E. Bergles, and M. B. Pate, “Augmentation of R-113 in-tube evaporation with micro-fin tubes,” ASHRAE Transactions, vol. 92, part 2, pp. 506–524, 1986. View at Google Scholar
  53. J. C. Khanpara, M. B. Pate, and A. E. Bergles, “Local evaporation heat transfer in a smooth tube and a micro-fin tube using refrigerants 22 and 113,” in Proceedings of Boiling and Condensation in Heat Transfer Equipment, pp. 31–39, 1987, HTD-85. View at Scopus
  54. S. F. Al-Fahed, Z. H. Ayub, A. M. Al-Marafie, and B. M. Soliman, “Heat transfer and pressure drop in a tube with internal microfins under turbulent water flow conditions,” Experimental Thermal and Fluid Science, vol. 7, no. 3, pp. 249–253, 1993. View at Google Scholar · View at Scopus
  55. C. B. Chiou, C. C. Wang, and D. C. Lu, “Single-phase heat transfer and pressure drop characteristics of microfin tubes,” in Proceedings of the ASHRAE Annual Meeting, pp. 1041–1048, June 1995, no. SD-95-11-1. View at Scopus
  56. M. Huq, A. M. Aziz-ul Huq, and M. M. Rahman, “Experimental measurements of heat transfer in an internally finned tube,” International Communications in Heat and Mass Transfer, vol. 25, no. 5, pp. 619–630, 1998. View at Publisher · View at Google Scholar · View at Scopus
  57. M. K. Jensen and A. Vlakancic, “Experimental investigation of turbulent heat transfer and fluid flow in internally finned tubes,” International Journal of Heat and Mass Transfer, vol. 42, no. 7, pp. 1343–1351, 1999. View at Publisher · View at Google Scholar · View at Scopus
  58. R. L. Webb, R. Narayanamurthy, and P. Thors, “Heat transfer and friction characteristics of internal helical-rib roughness,” Journal of Heat Transfer, vol. 122, no. 1, pp. 134–142, 2000. View at Publisher · View at Google Scholar · View at Scopus
  59. H. S. Wang and J. W. Rose, “Prediction of effective friction factors for single-phase flow in horizontal microfin tubes,” International Journal of Refrigeration, vol. 27, no. 8, pp. 904–913, 2004. View at Publisher · View at Google Scholar · View at Scopus
  60. D. H. Han and K.-J. Lee, “Single-phase heat transfer and flow characteristics of micro-fin tubes,” Applied Thermal Engineering, vol. 25, no. 11-12, pp. 1657–1669, 2005. View at Publisher · View at Google Scholar · View at Scopus
  61. X.-W. Li, J.-A. Meng, and Z.-X. Li, “Experimental study of single-phase pressure drop and heat transfer in a micro-fin tube,” Experimental Thermal and Fluid Science, vol. 32, no. 2, pp. 641–648, 2007. View at Publisher · View at Google Scholar · View at Scopus
  62. G. J. Zdaniuk, L. M. Chamra, and D. Keith Walters, “Correlating heat transfer and friction in helically-finned tubes using artificial neural networks,” International Journal of Heat and Mass Transfer, vol. 50, no. 23-24, pp. 4713–4723, 2007. View at Publisher · View at Google Scholar · View at Scopus
  63. G. J. Zdaniuk, L. M. Chamra, and P. J. Mago, “Experimental determination of heat transfer and friction in helically-finned tubes,” Experimental Thermal and Fluid Science, vol. 32, no. 3, pp. 761–775, 2008. View at Publisher · View at Google Scholar · View at Scopus
  64. M. Siddique and M. Alhazmy, “Experimental study of turbulent single-phase flow and heat transfer inside a micro-finned tube,” International Journal of Refrigeration, vol. 31, no. 2, pp. 234–241, 2008. View at Publisher · View at Google Scholar · View at Scopus
  65. V. Gnielinski, “New equations for heat and mass transfer in turbulent pipe and channel flow,” International Chemical Engineering, vol. 16, pp. 359–368, 1976. View at Google Scholar
  66. S. E. Haaland, “Simple and explicit formulas for the friction factor in turbulent pipe flow,” Journal of Fluids Engineering, vol. 105, no. 1, pp. 89–90, 1983. View at Google Scholar · View at Scopus
  67. G. J. Zdaniuk, R. Luck, and L. M. Chamra, “Linear correlation of heat transfer and friction in helically-finned tubes using five simple groups of parameters,” International Journal of Heat and Mass Transfer, vol. 51, no. 13-14, pp. 3548–3555, 2008. View at Publisher · View at Google Scholar · View at Scopus
  68. R. L. Webb, “Single-phase heat transfer, friction, and fouling characteristics of three-dimensional cone roughness in tube flow,” International Journal of Heat and Mass Transfer, vol. 52, no. 11-12, pp. 2624–2631, 2009. View at Publisher · View at Google Scholar · View at Scopus
  69. W. Li and R. L. Webb, “Fouling in enhanced tubes using cooling tower water. Part II: combined particulate and precipitation fouling,” International Journal of Heat and Mass Transfer, vol. 43, no. 19, pp. 3579–3588, 2000. View at Publisher · View at Google Scholar · View at Scopus
  70. P. Bharadwaj, A. D. Khondge, and A. W. Date, “Heat transfer and pressure drop in a spirally grooved tube with twisted tape insert,” International Journal of Heat and Mass Transfer, vol. 52, no. 7-8, pp. 1938–1944, 2009. View at Publisher · View at Google Scholar · View at Scopus
  71. S. Kiwan and O. Zeitoun, “Natural convection in a horizontal cylindrical annulus using porous fins,” International Journal of Numerical Methods for Heat and Fluid Flow, vol. 18, no. 5, pp. 618–634, 2008. View at Publisher · View at Google Scholar · View at Scopus
  72. T. K. Aldoss, M. A. Al-Nimr, and M. A. Hader, “Using capsulated liquid metal fins for heat transfer enhancement,” Journal of Enhanced Heat Transfer, vol. 11, no. 2, pp. 151–160, 2004. View at Publisher · View at Google Scholar · View at Scopus
  73. D. F. Dipprey and R. H. Sabersky, “Heat and momentum transfer in smooth and rough tubes at various prandtl numbers,” International Journal of Heat and Mass Transfer, vol. 6, no. 5, pp. 329–353, 1963. View at Google Scholar · View at Scopus
  74. G. Lauriat and R. Ghafir, “Forced convective transfer in porous media,” in Handbook of Porous Media, K. Vafai and H. A. Hadim, Eds., Marcel Dekker, New York, NY, USA, 2000. View at Google Scholar
  75. J. Y. Jang and J. L. Chen, “Forced convection in a parallel plate channel partially filled with a high porosity medium,” International Communications in Heat and Mass Transfer, vol. 19, no. 2, pp. 263–273, 1992. View at Google Scholar · View at Scopus
  76. S. Chikh, A. Boumedien, K. Bouhadef, and G. Lauriat, “Analytical solution of non-Darcian forced convection in an annular duct partially filled with a porous medium,” International Journal of Heat and Mass Transfer, vol. 38, no. 9, pp. 1543–1551, 1995. View at Google Scholar · View at Scopus
  77. S. Chikh, A. Boumedien, K. Bouhadef, and G. Lauriat, “Non-Darcian forced convection analysis in an annulus partially filled with a porous material,” Numerical Heat Transfer A, vol. 28, no. 6, pp. 707–722, 1995. View at Google Scholar · View at Scopus
  78. M. A. Al-Nimr and M. K. Alkam, “Unsteady non-Darcian forced convection analysis in an annulus partially filled with a porous material,” Journal of Heat Transfer, vol. 119, no. 4, pp. 799–804, 1997. View at Google Scholar · View at Scopus
  79. M. K. Alkam and M. A. Al-Nimr, “Improving the performance of double-pipe heat exchangers by using porous substrates,” International Journal of Heat and Mass Transfer, vol. 42, no. 19, pp. 3609–3618, 1999. View at Publisher · View at Google Scholar · View at Scopus
  80. M. K. Alkam and M. A. Al-Nimr, “Transient non-Darcian forced convection flow in a pipe partially filled with a porous material,” International Journal of Heat and Mass Transfer, vol. 41, no. 2, pp. 347–356, 1998. View at Google Scholar · View at Scopus
  81. M. A. Al-Nimr and M. K. Alkam, “Unsteady non-Darcian fluid flow in parallel-plates channels partially filled with porous materials,” Heat and Mass Transfer, vol. 33, no. 4, pp. 315–318, 1998. View at Google Scholar · View at Scopus
  82. M. A. Al-Nimr and M. K. Alkam, “A modified tubeless solar collector partially filled with porous substrate,” Renewable Energy, vol. 13, no. 2, pp. 165–173, 1998. View at Google Scholar · View at Scopus
  83. M. K. Alkam, M. A. Al-Nimr, and M. O. Hamdan, “On forced convection in channels partially filled with porous substrates,” Heat and Mass Transfer, vol. 38, no. 4-5, pp. 337–342, 2002. View at Publisher · View at Google Scholar · View at Scopus
  84. M. O. Hamdan, M. A. Al-Nimr, and M. K. Alkam, “Enhancing forced convection by inserting porous substrate in the core of a parallel-plate channel,” International Journal of Numerical Methods for Heat and Fluid Flow, vol. 10, no. 5, pp. 502–517, 2000. View at Google Scholar · View at Scopus
  85. M. K. Alkam and M. A. Al-Nimr, “Solar collectors with tubes partially filled with porous substrates,” Journal of Solar Energy Engineering, vol. 121, no. 1, pp. 20–24, 1999. View at Google Scholar · View at Scopus
  86. J. L. Lage and A. Narasimhan, “Porous media enhanced forced convection fundamentals and applications,” in Handbook of Porous Media, K. Vafai and H. A. Hadim, Eds., Marcel Dekker, New York, NY, USA, 2000. View at Google Scholar
  87. H. R. P. G. Darcy, “Les Fontaines Publiques de la volle de Dijon,” Vector Dalmont, Paris, France, 1856.
  88. H. C. Brinkman, “A calculation of the viscous force exerted by a flowing fluid on a dense swarm of particles,” Applied Scientific Research, vol. 1, no. 1, pp. 27–34, 1949. View at Publisher · View at Google Scholar · View at Scopus
  89. H. C. Brinkman, “On the permeability of media consisting of closely packed porous particles,” Applied Scientific Research, vol. 1, no. 1, pp. 81–86, 1949. View at Publisher · View at Google Scholar · View at Scopus
  90. J. Bear and Y. Bachmat, Introduction to Modeling of Transport Phenomena in Porous Media, Kluwer Academic Publishers, Dodrecht, The Netherlands, 1990.
  91. K. Vafai and C. L. Tien, “Boundary and inertia effects on flow and heat transfer in porous media,” International Journal of Heat and Mass Transfer, vol. 24, no. 2, pp. 195–203, 1981. View at Google Scholar · View at Scopus
  92. A. Amiri and K. Vafai, “Transient analysis of incompressible flow through a packed bed,” International Journal of Heat and Mass Transfer, vol. 41, no. 24, pp. 4259–4279, 1998. View at Publisher · View at Google Scholar · View at Scopus
  93. B. Alazmi and K. Vafai, “Constant wall heat flux boundary conditions in porous media under local thermal non-equilibrium conditions,” International Journal of Heat and Mass Transfer, vol. 45, no. 15, pp. 3071–3087, 2002. View at Publisher · View at Google Scholar · View at Scopus
  94. A.-R. A. Khaled and K. Vafai, “The role of porous media in modeling flow and heat transfer in biological tissues,” International Journal of Heat and Mass Transfer, vol. 46, no. 26, pp. 4989–5003, 2003. View at Publisher · View at Google Scholar · View at Scopus
  95. K. Khanafer and K. Vafai, “Isothermal surface production and regulation for high heat flux applications utilizing porous inserts,” International Journal of Heat and Mass Transfer, vol. 44, no. 15, pp. 2933–2947, 2001. View at Publisher · View at Google Scholar · View at Scopus
  96. A. Marafie and K. Vafai, “Analysis of non-Darcian effects on temperature differentials in porous media,” International Journal of Heat and Mass Transfer, vol. 44, no. 23, pp. 4401–4411, 2001. View at Publisher · View at Google Scholar · View at Scopus
  97. C. W. Sohn and M. M. Chen, “Microconvective thermal conductivity in disperse two-phase mixtures as observed in a low velocity couette flow experiment,” Journal of Heat Transfer, vol. 103, no. 1, pp. 47–51, 1981. View at Google Scholar · View at Scopus
  98. A. S. Ahuja, “Augmentation of heat transport in laminar flow of polystyrene suspensions. I. Experiments and results,” Journal of Applied Physics, vol. 46, no. 8, pp. 3408–3416, 1975. View at Publisher · View at Google Scholar · View at Scopus
  99. A. S. Ahuja, “Augmentation of heat transport in laminar flow of polystyrene suspensions. II. Analysis of the data,” Journal of Applied Physics, vol. 46, no. 8, pp. 3417–3425, 1975. View at Publisher · View at Google Scholar · View at Scopus
  100. G. Hetsroni and R. Rozenblit, “Heat transfer to a liquid-solid mixture in a flume,” International Journal of Multiphase Flow, vol. 20, no. 4, pp. 671–689, 1994. View at Google Scholar · View at Scopus
  101. S. U. S. Choi, “Enhancing thermal conductivity of fluids with nanoparticles,” in Developments Applications of Non-Newtonian Flows, D. A. Siginer and H. P. Wang, Eds., vol. 231/MD-vol. 66, pp. 99–105, ASME, New York, NY, USA, 1995. View at Google Scholar
  102. P. Garg, J. L. Alvarado, C. Marsh, T. A. Carlson, D. A. Kessler, and K. Annamalai, “An experimental study on the effect of ultrasonication on viscosity and heat transfer performance of multi-wall carbon nanotube-based aqueous nanofluids,” International Journal of Heat and Mass Transfer, vol. 52, no. 21-22, pp. 5090–5101, 2009. View at Publisher · View at Google Scholar · View at Scopus
  103. H. Masuda, A. Ebata, K. Teramae, and N. Hishinuma, “Alteration of thermal conductivity and viscosity of liquid by dispersing ultra-fine particles (dispersion of c-Al2O3, SiO2 and TiO2 ultra-fine particles,” Netsu Bussei, vol. 4, pp. 227–233, 1993. View at Google Scholar
  104. J. A. Eastman, S. U. S. Choi, S. Li, L. J. Thompson, and S. Lee, “Enhanced thermal conductivity through the development of nanofluids,” in Proceedings of the Materials Research Society (MRS '96), Boston, Mass, USA, 1996.
  105. S. Lee, S. U.-S. Choi, S. Li, and J. A. Eastman, “Measuring thermal conductivity of fluids containing oxide nanoparticles,” Journal of Heat Transfer, vol. 121, no. 2, pp. 280–288, 1999. View at Google Scholar · View at Scopus
  106. Y. M. Xuan and Q. Li, “Heat transfer enhancement of nano-fluids,” International Journal of Heat Fluid Flow, vol. 21, pp. 58–64, 2000. View at Google Scholar
  107. P. Keblinski, S. R. Phillpot, S. U. S. Choi, and J. A. Eastman, “Mechanisms of heat flow in suspensions of nano-sized particles (nanofluids),” International Journal of Heat and Mass Transfer, vol. 45, no. 4, pp. 855–863, 2001. View at Publisher · View at Google Scholar · View at Scopus
  108. H. Xie, J. Wang, T. Xi, Y. Liu, F. Ai, and Q. Wu, “Thermal conductivity enhancement of suspensions containing nanosized alumina particles,” Journal of Applied Physics, vol. 91, no. 7, pp. 4568–4572, 2002. View at Publisher · View at Google Scholar · View at Scopus
  109. X. Wang, X. Xu, and S. U. S. Choi, “Thermal conductivity of nanoparticle-fluid mixture,” Journal of Thermophysics and Heat Transfer, vol. 13, no. 4, pp. 474–480, 1999. View at Google Scholar · View at Scopus
  110. B.-X. Wang, L.-P. Zhou, and X.-F. Peng, “A fractal model for predicting the effective thermal conductivity of liquid with suspension of nanoparticles,” International Journal of Heat and Mass Transfer, vol. 46, no. 14, pp. 2665–2672, 2003. View at Publisher · View at Google Scholar · View at Scopus
  111. D. Wen and Y. Ding, “Effective thermal conductivity of aqueous suspensions of carbon nanotubes (carbon nanotube nanofluids),” Journal of Thermophysics and Heat Transfer, vol. 18, no. 4, pp. 481–485, 2004. View at Google Scholar · View at Scopus
  112. S. K. Das, N. Putra, and W. Roetzel, “Pool boiling characteristics of nano-fluids,” International Journal of Heat and Mass Transfer, vol. 46, no. 5, pp. 851–862, 2003. View at Publisher · View at Google Scholar · View at Scopus
  113. S. K. Das, N. Putra, and W. Roetzel, “Pool boiling of nano-fluids on horizontal narrow tubes,” International Journal of Multiphase Flow, vol. 29, no. 8, pp. 1237–1247, 2003. View at Publisher · View at Google Scholar · View at Scopus
  114. S. K. Das, N. Putra, P. Thiesen, and W. Roetzel, “Temperature dependence of thermal conductivity enhancement for nanofluids,” Journal of Heat Transfer, vol. 125, no. 4, pp. 567–574, 2003. View at Publisher · View at Google Scholar · View at Scopus
  115. S. M. You, J. H. Kim, and K. H. Kim, “Effect of nanoparticles on critical heat flux of water in pool boiling heat transfer,” Applied Physics Letters, vol. 83, no. 16, pp. 3374–3376, 2003. View at Publisher · View at Google Scholar · View at Scopus
  116. P. Vassallo, R. Kumar, and S. D'Amico, “Pool boiling heat transfer experiments in silica-water nano-fluids,” International Journal of Heat and Mass Transfer, vol. 47, no. 2, pp. 407–411, 2004. View at Publisher · View at Google Scholar · View at Scopus
  117. D. Wen and Y. Ding, “Experimental investigation into the pool boiling heat transfer of aqueous based γ-alumina nanofluids,” Journal of Nanoparticle Research, vol. 7, no. 2-3, pp. 265–274, 2005. View at Publisher · View at Google Scholar · View at Scopus
  118. S. Lee and S. U. S. Choi, “Application of metallic nanoparticle suspensions in advanced cooling systems,” in Proceedings of the International Mechanical Engineering Congress and Exhibition, Atlanta, Ga, USA, 1996.
  119. B. C. Pak and Y. I. Cho, “Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particles,” Experimental Heat Transfer, vol. 11, no. 2, pp. 151–170, 1998. View at Google Scholar · View at Scopus
  120. Y. Xuan and W. Roetzel, “Conceptions for heat transfer correlation of nanofluids,” International Journal of Heat and Mass Transfer, vol. 43, no. 19, pp. 3701–3707, 2000. View at Publisher · View at Google Scholar · View at Scopus
  121. Q. Li and Y. Xuan, “Convective heat transfer and flow characteristics of Cu-water nanofluid,” Science in China E, vol. 45, no. 4, pp. 408–416, 2002. View at Google Scholar · View at Scopus
  122. Y. Xuan and Q. Li, “Investigation on convective heat transfer and flow features of nanofluids,” Journal of Heat Transfer, vol. 125, no. 1, pp. 151–155, 2003. View at Publisher · View at Google Scholar · View at Scopus
  123. K. Khanafer, K. Vafai, and M. Lightstone, “Buoyancy-driven heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids,” International Journal of Heat and Mass Transfer, vol. 46, no. 19, pp. 3639–3653, 2003. View at Publisher · View at Google Scholar · View at Scopus
  124. D. Wen and Y. Ding, “Experimental investigation into convective heat transfer of nanofluids at the entrance region under laminar flow conditions,” International Journal of Heat and Mass Transfer, vol. 47, no. 24, pp. 5181–5188, 2004. View at Publisher · View at Google Scholar · View at Scopus
  125. J. A. Eastman, S. U. S. Choi, S. Li, W. Yu, and L. J. Thompson, “Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles,” Applied Physics Letters, vol. 78, no. 6, pp. 718–720, 2001. View at Publisher · View at Google Scholar · View at Scopus
  126. F. J. Wasp, Solid-Liquid Slurry Pipeline Transportation, Trans Tech, Berlin, Germany, 1977.
  127. M.-S. Liu, M. C.-C. Lin, C. Y. Tsai, and C.-C. Wang, “Enhancement of thermal conductivity with Cu for nanofluids using chemical reduction method,” International Journal of Heat and Mass Transfer, vol. 49, no. 17-18, pp. 3028–3033, 2006. View at Publisher · View at Google Scholar · View at Scopus
  128. W. Yu and S. U. S. Choi, “The role of interfacial layers in the enhanced thermal conductivity of nanofluids: a renovated Maxwell model,” Journal of Nanoparticle Research, vol. 5, no. 1-2, pp. 167–171, 2003. View at Publisher · View at Google Scholar · View at Scopus
  129. J. Koo and C. Kleinstreuer, “A new thermal conductivity model for nanofluids,” Journal of Nanoparticle Research, vol. 6, no. 6, pp. 577–588, 2004. View at Publisher · View at Google Scholar · View at Scopus
  130. J. Koo and C. Kleinstreuer, “Laminar nanofluid flow in microheat-sinks,” International Journal of Heat and Mass Transfer, vol. 48, no. 13, pp. 2652–2661, 2005. View at Publisher · View at Google Scholar · View at Scopus
  131. R. L. Hamilton and O. K. Crosser, “Thermal conductivity of heterogeneous two-component systems,” Industrial and Engineering Chemistry Fundamentals, vol. 1, no. 3, pp. 187–191, 1962. View at Google Scholar · View at Scopus
  132. D. A. G. Bruggemen, “Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen, I. Dielektrizitatskonstanten und Leitfahigkeiten der Mischkorper aus isotropen substanzen,” Annalen der Physik, vol. 24, pp. 636–679, 1935. View at Google Scholar · View at Scopus
  133. S. M. S. Murshed, K. C. Leong, and C. Yang, “Enhanced thermal conductivity of TiO2—water based nanofluids,” International Journal of Thermal Sciences, vol. 44, no. 4, pp. 367–373, 2005. View at Publisher · View at Google Scholar · View at Scopus
  134. Q. Xue and W.-M. Xu, “A model of thermal conductivity of nanofluids with interfacial shells,” Materials Chemistry and Physics, vol. 90, no. 2-3, pp. 298–301, 2005. View at Publisher · View at Google Scholar · View at Scopus
  135. C. H. Chon, K. D. Kihm, S. P. Lee, and S. U. S. Choi, “Empirical correlation finding the role of temperature and particle size for nanofluid (Al2O3) thermal conductivity enhancement,” Applied Physics Letters, vol. 87, no. 15, Article ID 153107, 3 pages, 2005. View at Publisher · View at Google Scholar · View at Scopus
  136. R. Prasher, P. Bhattacharya, and P. E. Phelan, “Brownian-motion-based convective-conductive model for the effective thermal conductivity of nanofluids,” Journal of Heat Transfer, vol. 128, no. 6, pp. 588–595, 2006. View at Publisher · View at Google Scholar · View at Scopus
  137. S. P. Jang and S. U. S. Choi, “Effects of various parameters on nanofluid thermal conductivity,” Journal of Heat Transfer, vol. 129, no. 5, pp. 617–623, 2007. View at Publisher · View at Google Scholar · View at Scopus
  138. X.-Q. Wang and A. S. Mujumdar, “Heat transfer characteristics of nanofluids: a review,” International Journal of Thermal Sciences, vol. 46, no. 1, pp. 1–19, 2007. View at Publisher · View at Google Scholar · View at Scopus
  139. R. S. Vajjha and D. K. Das, “Experimental determination of thermal conductivity of three nanofluids and development of new correlations,” International Journal of Heat and Mass Transfer, vol. 52, no. 21-22, pp. 4675–4682, 2009. View at Publisher · View at Google Scholar · View at Scopus
  140. J. Buongiorno, “Convective transport in nanofluids,” Journal of Heat Transfer, vol. 128, no. 3, pp. 240–250, 2006. View at Publisher · View at Google Scholar · View at Scopus
  141. A. Mokmeli and M. Saffar-Avval, “Prediction of nanofluid convective heat transfer using the dispersion model,” International Journal of Thermal Sciences, vol. 49, no. 3, pp. 471–478, 2010. View at Publisher · View at Google Scholar · View at Scopus
  142. E. Pfautsch, Forced convection in nanofluids over a flat plate, M.S. thesis, Faculty of the Graduate School, University of Missouri, 2008.
  143. T. P. Cotter, “Theory of heat pipes,” Tech. Rep. La-3246- MS, Los Alamos, Science Laboratory, 1965. View at Google Scholar
  144. L. L. Vasiliev, “Heat pipes in modern heat exchangers,” Applied Thermal Engineering, vol. 25, no. 1, pp. 1–19, 2005. View at Publisher · View at Google Scholar · View at Scopus
  145. M. Shafahi, V. Bianco, K. Vafai, and O. Manca, “An investigation of the thermal performance of cylindrical heat pipes using nanofluids,” International Journal of Heat and Mass Transfer, vol. 53, no. 1–3, pp. 376–383, 2010. View at Publisher · View at Google Scholar · View at Scopus
  146. Y. H. Yau and M. Ahmadzadehtalatapeh, “A review on the application of horizontal heat pipe heat exchangers in air conditioning systems in the tropics,” Applied Thermal Engineering, vol. 30, no. 2-3, pp. 77–84, 2010. View at Publisher · View at Google Scholar · View at Scopus
  147. T. P. Cotter, “Principles and prospects of micro-heat pipe,” in Proceedings of the 5th International Heat Pipe Conference, vol. 4, pp. 328–332, Tsukuba, Japan, 1984.
  148. L. L. Vasiliev, “Micro and miniature heat pipes—electronic component coolers,” Applied Thermal Engineering, vol. 28, no. 4, pp. 266–273, 2008. View at Publisher · View at Google Scholar · View at Scopus
  149. C. B. Sobhan, R. L. Rag, and G. P. Peterson, “A review and comparative study of the investigations on micro heat pipes,” International Journal of Energy Research, vol. 31, no. 6-7, pp. 664–688, 2007. View at Publisher · View at Google Scholar · View at Scopus
  150. A. F. Khadrawi and M. A. Al-Nimr, “A simplistic way for cooling an intermittent operating internal combustion engine,” International Journal of Heat and Technology, vol. 26, no. 2, pp. 163–166, 2008. View at Google Scholar · View at Scopus
  151. K. Vafai and A.-R. A. Khaled, “Analysis of flexible microchannel heat sink systems,” International Journal of Heat and Mass Transfer, vol. 48, no. 9, pp. 1739–1746, 2005. View at Publisher · View at Google Scholar · View at Scopus
  152. A.-R. A. Khaled, “Analysis of heat transfer inside flexible thin-film channels with nonuniform height distributions,” Journal of Heat Transfer, vol. 129, no. 3, pp. 401–404, 2007. View at Publisher · View at Google Scholar · View at Scopus
  153. A.-R. A. Khaled and K. Vafai, “Analysis of thermally expandable flexible fluidic thin-film channels,” Journal of Heat Transfer, vol. 129, no. 7, pp. 813–818, 2007. View at Publisher · View at Google Scholar · View at Scopus
  154. T. J. Young and K. Vafai, “Convective cooling of a heated obstacle in a channel,” International Journal of Heat and Mass Transfer, vol. 41, no. 20, pp. 3131–3148, 1998. View at Publisher · View at Google Scholar · View at Scopus
  155. S. Acharya, R. G. Hibbs, Y. Chen, and D. E. Nikitopoulos, “Mass/heat transfer in a ribbed passage with cylindrical vortex generators: the effect of generator-rib spacing,” Journal of Heat Transfer, vol. 122, no. 4, pp. 641–652, 2000. View at Publisher · View at Google Scholar · View at Scopus
  156. C.-N. Lin and J.-Y. Jang, “Conjugate heat transfer and fluid flow analysis in fin-tube heat exchangers with wave-type vortex generators,” Journal of Enhanced Heat Transfer, vol. 9, no. 3-4, pp. 123–136, 2002. View at Publisher · View at Google Scholar · View at Scopus
  157. S. Tiwari, P. L. N. Prasad, and G. Biswas, “A numerical study of heat transfer in fin-tube heat exchangers using winglet-type vortex generators in common-flow down configuration,” Progress in Computational Fluid Dynamics, vol. 3, no. 1, pp. 32–41, 2003. View at Google Scholar · View at Scopus
  158. F. Dupont, C. Gabillet, and P. Bot, “Experimental study of the flow in a compact heat exchanger channel with embossed-type vortex generators,” Journal of Fluids Engineering, vol. 125, no. 4, pp. 701–709, 2003. View at Publisher · View at Google Scholar · View at Scopus
  159. J. E. O'Brien, M. S. Sohal, and P. C. Wallstedt, “Local heat transfer and pressure drop for finned-tube heat exchangers using oval tubes and vortex generators,” Journal of Heat Transfer, vol. 126, no. 5, pp. 826–835, 2004. View at Publisher · View at Google Scholar · View at Scopus
  160. Y.-L. Tsay, T. S. Chang, and J. C. Cheng, “Heat transfer enhancement of backward-facing step flow in a channel by using baffle installation on the channel wall,” Acta Mechanica, vol. 174, no. 1-2, pp. 63–76, 2005. View at Publisher · View at Google Scholar · View at Scopus
  161. A. Joardar and A. M. Jacobi, “Impact of leading edge delta-wing vortex generators on the thermal performance of a flat tube, louvered-fin compact heat exchanger,” International Journal of Heat and Mass Transfer, vol. 48, no. 8, pp. 1480–1493, 2005. View at Publisher · View at Google Scholar · View at Scopus
  162. M. H. Nasiruddin and K. Siddiqui, “Heat transfer augmentation in a heat exchanger tube using a baffle,” International Journal of Heat and Fluid Flow, vol. 28, no. 2, pp. 318–328, 2007. View at Publisher · View at Google Scholar · View at Scopus
  163. M. J. Lawson and K. A. Thole, “Heat transfer augmentation along the tube wall of a louvered fin heat exchanger using practical delta winglets,” International Journal of Heat and Mass Transfer, vol. 51, no. 9-10, pp. 2346–2360, 2008. View at Publisher · View at Google Scholar · View at Scopus
  164. L. H. Tang, M. Zeng, and Q. W. Wang, “Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns,” Experimental Thermal and Fluid Science, vol. 33, no. 5, pp. 818–827, 2009. View at Publisher · View at Google Scholar · View at Scopus
  165. E. M. Sparrow, J. E. Niethammer, and A. Chaboki, “Heat transfer and pressure drop characteristics of arrays of rectangular modules encountered in electronic equipment,” International Journal of Heat and Mass Transfer, vol. 25, no. 7, pp. 961–973, 1982. View at Google Scholar · View at Scopus
  166. E. M. Sparrow, A. A. Yanezmoreno, and D. R. Otis Jr., “Convective heat transfer response to height differences in an array of block-like electronic components,” International Journal of Heat and Mass Transfer, vol. 27, no. 3, pp. 469–473, 1984. View at Google Scholar · View at Scopus
  167. Y.-M. Chen and J.-M. Ting, “Ultra high thermal conductivity polymer composites,” Carbon, vol. 40, no. 3, pp. 359–362, 2002. View at Publisher · View at Google Scholar · View at Scopus
  168. M. Meis, F. Varas, A. Velázquez, and J. M. Vega, “Heat transfer enhancement in micro-channels caused by vortex promoters,” International Journal of Heat and Mass Transfer, vol. 53, no. 1–3, pp. 29–40, 2010. View at Publisher · View at Google Scholar · View at Scopus
  169. L. Sheik Ismail, R. Velraj, and C. Ranganayakulu, “Studies on pumping power in terms of pressure drop and heat transfer characteristics of compact plate-fin heat exchangers—a review,” Renewable and Sustainable Energy Reviews, vol. 14, no. 1, pp. 478–485, 2010. View at Publisher · View at Google Scholar · View at Scopus
  170. S. Eiamsa-ard, K. Wongcharee, P. Eiamsa-ard, and C. Thianpong, “Heat transfer enhancement in a tube using delta-winglet twisted tape inserts,” Applied Thermal Engineering, vol. 30, no. 4, pp. 310–318, 2010. View at Publisher · View at Google Scholar · View at Scopus
  171. G. Tanda, “Natural convective heat transfer in vertical channels with low-thermal-conductivity ribs,” International Journal of Heat and Fluid Flow, vol. 29, no. 5, pp. 1319–1325, 2008. View at Publisher · View at Google Scholar · View at Scopus
  172. A. Saidi and B. Sundén, “A numerical investigation of heat transfer enhancement in offset strip fin heat exchangers in self-sustained oscillatory flows,” International Journal of Numerical Methods for Heat and Fluid Flow, vol. 11, no. 7, pp. 699–717, 2001. View at Publisher · View at Google Scholar · View at Scopus
  173. B. A. Jubran, S. A. Swiety, and M. A. Hamdan, “Convective heat transfer and pressure drop characteristics of various array configurations to simulate the cooling of electronic modules,” International Journal of Heat and Mass Transfer, vol. 39, no. 16, pp. 3519–3529, 1996. View at Publisher · View at Google Scholar · View at Scopus
  174. T. J. Young and K. Vafai, “Convective flow and heat transfer in a channel containing multiple heated obstacles,” International Journal of Heat and Mass Transfer, vol. 41, no. 21, pp. 3279–3298, 1998. View at Google Scholar · View at Scopus
  175. M. K. Alkam, M. A. Al-Nimr, and M. O. Hamdan, “Enhancing heat transfer in parallel-plate channels by using porous inserts,” International Journal of Heat and Mass Transfer, vol. 44, no. 5, pp. 931–938, 2001. View at Publisher · View at Google Scholar · View at Scopus
  176. J. Ting and M. L. Lake, “Vapor grown carbon fiber reinforced aluminum composites with very high thermal conductivity,” Journal of Materials Research, vol. 10, no. 2, pp. 247–250, 1995. View at Google Scholar · View at Scopus
  177. K. Naito, J.-M. Yang, Y. Xu, and Y. Kagawa, “Enhancing the thermal conductivity of polyacrylonitrile- and pitch-based carbon fibers by grafting carbon nanotubes on them,” Carbon, vol. 48, no. 6, pp. 1849–1857, 2010. View at Publisher · View at Google Scholar · View at Scopus