Table of Contents Author Guidelines Submit a Manuscript
International Journal of Chemical Engineering
Volume 2014 (2014), Article ID 371853, 10 pages
http://dx.doi.org/10.1155/2014/371853
Research Article

Performance Assessment of Sintered Metal Fiber Filters in Fluid Catalytic Cracking Unit

1College of Mechanical and Transportation Engineering, China University of Petroleum, Beijing 102249, China
2College of Chemical Engineering, China University of Petroleum, Beijing 102249, China

Received 6 June 2014; Accepted 30 June 2014; Published 16 July 2014

Academic Editor: Donald L. Feke

Copyright © 2014 Liang Yang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Ito, T. Tanaka, and S. Kawamura, “Changes in pressure loss and face velocity of ceramic candle filters caused by reverse cleaning in hot coal gas filtration,” Powder Technology, vol. 100, no. 1, pp. 32–40, 1998. View at Publisher · View at Google Scholar · View at Scopus
  2. R. A. Newby, T. E. Lippert, M. A. Alvin, G. J. Burck, and Z. N. Sanjana, “Status of Westinghouse hot gas filters for coal and biomass power systems,” Journal of Engineering for Gas Turbines and Power, vol. 121, no. 3, pp. 401–408, 1999. View at Publisher · View at Google Scholar · View at Scopus
  3. D. H. Smith and G. Ahmadi, “Problems and progress in hot-gas filtration for pressurized fluidized bed combustion (PFBC) and integrated gasification combined cycle (IGCC),” Aerosol Science and Technology, vol. 29, no. 3, pp. 163–169, 1998. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Hajek and W. Peukert, “Experimental investigations with ceramic high-temperature filter media,” Filtration and Separation, vol. 33, no. 1, pp. 29–37, 1996. View at Publisher · View at Google Scholar · View at Scopus
  5. H. Sasatsu, N. Misawa, M. Shimizu, and R. Abe, “Predicting the pressure drop across hot gas filter (CTF) installed in a commercial size PFBC system,” Powder Technology, vol. 118, no. 1-2, pp. 58–67, 2001. View at Publisher · View at Google Scholar · View at Scopus
  6. J. P. K. Seville and R. Clift, Gas Cleaning in Demanding Applications, Edited by J. P. K. Seville, Blackie/Kluwer, London, UK, 1997.
  7. R. A. Meyers, Handbook of Petroleum Refining Processes, McGraw Hill, 2nd edition, 1996.
  8. V. Vasudevan, B. S. J. Kang, and E. K. Jonson, “A study on ash particle distribution characteristics of candle filter surface regeneration at room temperature,” US DOE grant No. DE-FC26-99FT40203, 2002.
  9. S. D. Sharma, M. Dolan, D. Park et al., “A critical review of syngas cleaning technologies—fundamental limitations and practical problems,” Powder Technology, vol. 180, no. 1-2, pp. 115–121, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. P. Kilgallon, N. J. Simms, J. E. Oakey, and I. Boxall, “Metallic filters for hot gas cleaning,” Tech. Rep. Coal R239, Power Generation Technology Center, Cranfield University, Cranfield, UK, 2004. View at Google Scholar
  11. D. B. Purchas and K. Sutherland, Handbook of Filter Media, Elsevier Advanced Technology, New York, NY, USA, 2nd edition, 2002.
  12. S. Jha, R. S. Sekellick, and K. L. Rubow, “Sintered metal hot gas filters,” in High Temperature Gas Cleaning, A. Dittler, G. Hemmer, and G. Kasper, Eds., vol. 2, p. 492, 1999. View at Google Scholar
  13. M. Heim, B. J. Mullins, H. Umhauer, and G. Kasper, “Performance evaluation of three optical particle counters with an efficient “multimodal’ calibration method,” Journal of Aerosol Science, vol. 39, no. 12, pp. 1019–1031, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. Q. Xu, Z. Ji, and L. Yang, “Performance assessment of high temperature flue gas on-line particle size analyzer,” CIESC Journal, vol. 63, no. 11, pp. 3506–3512, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. E. Schmidt and F. Löffler, “Preparation of dust cakes for microscopic examination,” Powder Technology, vol. 60, no. 2, pp. 173–177, 1990. View at Publisher · View at Google Scholar · View at Scopus
  16. X. Simon, D. Bémer, S. Calle, D. Thomas, and R. Régnier, “Description of the particle puff emitted downstream of different dust separators consecutive to pulse-jet cleaning,” Filtration, vol. 5, no. 1, pp. 52–61, 2005. View at Google Scholar
  17. J. Binnig, J. Meyer, and G. Kasper, “Origin and mechanisms of dust emission from pulse-jet cleaned filter media,” Powder Technology, vol. 189, no. 1, pp. 108–114, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. C. Tien and B. V. Ramarao, “Can filter cake porosity be estimated based on the Kozeny-Carman equation?” Powder Technology, vol. 237, pp. 233–240, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. E. Schmidt, “Experimental investigations into the compression of dust cakes deposited on filter media,” Filtration and Separation, vol. 32, no. 8, pp. 789–793, 1995. View at Publisher · View at Google Scholar · View at Scopus