Table of Contents Author Guidelines Submit a Manuscript
International Journal of Chemical Engineering
Volume 2017, Article ID 5361251, 10 pages
https://doi.org/10.1155/2017/5361251
Research Article

Reactive Extrusion of Polyethylene Terephthalate Waste and Investigation of Its Thermal and Mechanical Properties after Treatment

1Department of Chemistry, University of Sharjah, P.O. Box 27272, Sharjah, UAE
2College of Science and Engineering, Hamad Bin Khalifa University, P.O. Box 34110, Doha, Qatar

Correspondence should be addressed to Mahmoud A. Mohsin; ea.ca.hajrahs@nishomm

Received 6 October 2017; Accepted 6 November 2017; Published 23 November 2017

Academic Editor: Jose C. Merchuk

Copyright © 2017 Mahmoud A. Mohsin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Peplow, “The plastics revolution: how chemists are pushing polymers to new limits,” Nature, vol. 536, no. 7616, pp. 266–268, 2016. View at Publisher · View at Google Scholar
  2. S. R. Shukla and A. M. Harad, “Glycolysis of polyethylene terephthalate waste fibers,” Journal of Applied Polymer Science, vol. 97, no. 2, pp. 513–517, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. A. Stoski, M. F. Viante, C. S. Nunes, E. C. Muniz, M. L. Felsner, and C. A. P. Almeida, “Oligomer production through glycolysis of poly(ethylene terephthalate): effects of temperature and water content on reaction extent,” Polymer International, vol. 65, no. 9, pp. 1024–1030, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. A. M. Al-Sabagh, F. Z. Yehia, A.-M. M. F. Eissa et al., “Glycolysis of poly(ethylene terephthalate) catalyzed by the Lewis base ionic liquid [Bmim][OAc],” Industrial & Engineering Chemistry Research, vol. 53, no. 48, pp. 18443–18451, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. S. R. Shukla, V. Palekar, and N. Pingale, “Zeolite catalyzed glycolysis of polyethylene terephthalate bottle waste,” Journal of Applied Polymer Science, vol. 110, no. 1, pp. 501–506, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. R. V. Shah, V. S. Borude, and S. R. Shukla, “Recycling of PET waste using 3-amino-1-propanol by conventional or microwave irradiation and synthesis of bis-oxazin there from,” Journal of Applied Polymer Science, vol. 127, no. 1, pp. 323–328, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Khoonkari, A. H. Haghighi, Y. Sefidbakht, K. Shekoohi, and A. Ghaderian, “Chemical Recycling of PET Wastes with Different Catalysts,” International Journal of Polymer Science, vol. 2015, Article ID 124524, pp. 1–11, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. S. R. Shukla and A. M. Harad, “Aminolysis of polyethylene terephthalate waste,” Polymer Degradation and Stability, vol. 91, no. 8, pp. 1850–1854, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. F. Chen, Q. Zhou, R. Bu, F. Yang, and W. Li, “Kinetics of poly(ethylene terephthalate) fiber glycolysis in ethylene glycol,” Fibers and Polymers, vol. 16, no. 6, pp. 1213–1219, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. N. George and T. Kurian, “Recent developments in the chemical recycling of postconsumer poly(ethylene terephthalate) Waste,” Industrial & Engineering Chemistry Research, vol. 53, no. 37, pp. 14185–14198, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. Q. F. Yue, L. F. Xiao, M. L. Zhang, and X. F. Bai, “The glycolysis of poly(ethylene terephthalate) waste: Lewis acidic ionic liquids as high efficient catalysts,” Polymer, vol. 5, no. 4, pp. 1258–1271, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. S. H. Park and S. H. Kim, “Poly (ethylene terephthalate) recycling for high value added textiles,” Fashion and Textiles, vol. 1, no. 1, 2014. View at Publisher · View at Google Scholar
  13. A. Al-Sabagh, F. Yehia, G. Eshaq, A. Rabie, and A. ElMetwally, “Greener routes for recycling of polyethylene terephthalate,” Egyptian Journal of Petroleum, vol. 25, no. 1, pp. 53–64, 2016. View at Publisher · View at Google Scholar
  14. A. Ghaderian, A. H. Haghighi, F. A. Taromi, Z. Abdeen, A. Boroomand, and S. M.-R. Taheri, “Characterization of rigid polyurethane foam prepared from recycling of PET waste,” Periodica Polytechnica Chemical Engineering, vol. 59, no. 4, pp. 296–305, 2015. View at Publisher · View at Google Scholar
  15. A. Aguado, L. Martínez, L. Becerra et al., “Chemical depolymerisation of PET complex waste: Hydrolysis vs. glycolysis,” Journal of Material Cycles and Waste Management, vol. 16, no. 2, pp. 201–210, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. L. Bartolome, M. Imran, B. Gyoo, W. A, and D. Hyun, “Recent Developments in the Chemical Recycling of PET,” in Material Recycling - Trends and Perspectives, pp. 10–5772, InTech, 2012. View at Publisher · View at Google Scholar
  17. A. Koç, “Studying the utilization of plastic waste by chemical recycling method,” Open Journal of Applied Sciences, vol. 3, no. 7, pp. 413–420, 2013. View at Publisher · View at Google Scholar
  18. N. S. Todorov, M. F. Radenkov, and D. D. Todorova, “Utilization of crude glycerol and waste polyethylene terephthalate for production of alkyd resins,” Journal of Chemical Technology and Metallurgy, vol. 50, no. 3, pp. 240–248, 2015. View at Google Scholar · View at Scopus
  19. L. Zhang, J. Gao, J. Zou, and F. Yi, “Hydrolysis of poly(ethylene terephthalate) waste bottles in the presence of dual functional phase transfer catalysts,” Journal of Applied Polymer Science, vol. 130, no. 4, pp. 2790–2795, 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Chen, J. Lv, Y. Ji et al., “Alcoholysis of PET to produce dioctyl terephthalate by isooctyl alcohol with ionic liquid as cosolvent,” Polymer Degradation and Stability, vol. 107, pp. 178–183, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. H. Kurokawa, M.-A. Ohshima, K. Sugiyama, and H. Miura, “Methanolysis of polyethylene terephthalate (PET) in the presence of aluminium tiisopropoxide catalyst to form dimethyl terephthalate and ethylene glycol,” Polymer Degradation and Stability, vol. 79, no. 3, pp. 529–533, 2003. View at Publisher · View at Google Scholar · View at Scopus
  22. F. Liu, X. Cui, Z. Li, and X. Ge, in Proceedings of the 5th ISFR, pp. 272–276, Chengdu, China, 2009.
  23. C. N. Hoang and Y. H. Dang, “Aminolysis of poly(ethylene terephthalate) waste with ethylenediamine and characterization of a,u-diamine products,” Polymer Degradation and Stability, vol. 98, no. 3, pp. 697–708, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. N. E. Kamber, Y. Tsujii, K. Keets et al., “The Depolymerization of Poly(ethylene terephthalate) (PET) Using N-Heterocyclic Carbenes from Ionic Liquids,” Journal of Chemical Education, vol. 87, no. 5, pp. 519–521, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. M. Imran, B.-K. Kim, M. Han, B. G. Cho, and D. H. Kim, “Sub-and supercritical glycolysis of polyethylene terephthalate (PET) into the monomer bis(2-hydroxyethyl) terephthalate (BHET),” Polymer Degradation and Stability, vol. 95, no. 9, pp. 1685–1693, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. H. Wang, Y. Liu, Z. Li, X. Zhang, S. Zhang, and Y. Zhang, “Glycolysis of poly(ethylene terephthalate) catalyzed by ionic liquids,” European Polymer Journal, vol. 45, no. 5, pp. 1535–1544, 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. H. Yue, Y. Zhao, X. Ma, and J. Gong, “Ethylene glycol: properties, synthesis, and applications,” Chemical Society Reviews, vol. 41, no. 11, p. 4218, 2012. View at Publisher · View at Google Scholar
  28. S. K. Kanojiya, G. Shukla, S. Sharma et al., “Hydrogenation of Styrene Oxide to 2-Phenylethanol over Nanocrystalline Ni Prepared by Ethylene Glycol Reduction Method,” International Journal of Chemical Engineering, vol. 2014, Article ID 406939, 2014. View at Publisher · View at Google Scholar · View at Scopus
  29. A. N. A. S. A. A. Syariffuddeen, “Glycolysis of Poly (Ethylene Terephthalate) (PET) waste under conventional convection-conductive glycolysis,” International Journal of Engineering Research and Technology, 2012. View at Google Scholar
  30. V. Sharma, P. Shrivastava, and D. D. Agarwal, “Degradation of PET-bottles to monohydroxyethyl terephthalate (MHT) using ethylene glycol and hydrotalcite,” Journal of Polymer Research, vol. 22, no. 12, article no. 241, pp. 1–10, 2015. View at Publisher · View at Google Scholar · View at Scopus
  31. K. Ertas and G. Güçlü, “Alkyd resins synthesized from glycolysis products of waste PET,” Polymer—Plastics Technology and Engineering, vol. 44, no. 5, pp. 783–794, 2005. View at Publisher · View at Google Scholar · View at Scopus
  32. K. Gotoh, A. Yasukawa, and Y. Kobayashi, “Wettability characteristics of poly(ethylene terephthalate) films treated by atmospheric pressure plasma and ultraviolet excimer light,” Polymer Journal, vol. 43, no. 6, pp. 545–551, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. S. Makkam and W. Harnnarongchai, “Rheological and mechanical properties of recycled PET modified BY reactive extrusion,” in Proceedings of the Eco-Energy and Materials Science and Engineering, EMSES 2014, pp. 547–553, Thailand, December 2013. View at Publisher · View at Google Scholar · View at Scopus
  34. N. Dardmeh, A. Khosrowshahi, H. Almasi, and M. Zandi, “Study on Effect of the Polyethylene Terephthalate/Nanoclay Nanocomposite Film on the Migration of Terephthalic Acid into the Yoghurt Drinks Simulant,” Journal of Food Process Engineering, vol. 40, no. 1, Article ID e12324, 2017. View at Publisher · View at Google Scholar · View at Scopus
  35. Y. Zhu, Y. Wang, L. Sha, and J. Zhao, “Preparation of antimicrobial fabric using magnesium-based PET masterbatch,” Applied Surface Science, vol. 425, pp. 1101–1110, 2017. View at Publisher · View at Google Scholar
  36. M. Niu, X. Wang, Y. Yang et al., “The structure of microencapsulated carbon microspheres and its flame retardancy in poly(ethylene terephthalate),” Progress in Organic Coatings, vol. 95, pp. 79–84, 2016. View at Publisher · View at Google Scholar · View at Scopus
  37. A. Al-Mulla, “Enthalpy-entropy compensation in polyester degradation reactions,” International Journal of Chemical Engineering, Article ID 782346, 2012. View at Publisher · View at Google Scholar · View at Scopus
  38. W. D. Q. Lamas, J. C. F. Palau, and J. R. D. Camargo, “Waste materials co-processing in cement industry: Ecological efficiency of waste reuse,” Renewable & Sustainable Energy Reviews, vol. 19, pp. 200–207, 2013. View at Publisher · View at Google Scholar · View at Scopus
  39. R. Baidya, S. K. Ghosh, and U. V. Parlikar, “Co-processing of Industrial Waste in Cement Kiln – A Robust System for Material and Energy Recovery,” Procedia Environmental Sciences, vol. 31, pp. 309–317, 2016. View at Publisher · View at Google Scholar
  40. F. Welle, “Twenty years of PET bottle to bottle recycling—an overview,” Resources, Conservation & Recycling, vol. 55, no. 11, pp. 865–875, 2011. View at Publisher · View at Google Scholar · View at Scopus
  41. M. Mohsin, A. Hossin, and Y. Haik, “Thermal and mechanical properties of poly(vinyl alcohol) plasticized with glycerol,” Journal of Applied Polymer Science, vol. 122, no. 5, pp. 3102–3109, 2011. View at Publisher · View at Google Scholar · View at Scopus
  42. M. Mohsin, A. Hossin, and Y. Haik, “Thermomechanical properties of poly(vinyl alcohol) plasticized with varying ratios of sorbitol,” Materials Science and Engineering: A Structural Materials: Properties, Microstructure and Processing, vol. 528, no. 3, pp. 925–930, 2011. View at Publisher · View at Google Scholar · View at Scopus