Simulation of Multiphase Flow and Mixing in a Conveying Element of a Co-Rotating Twin-Screw Extruder by Using SPH

<div>Comparison of the particle distribution after 3 rotations between the results of case 3 and case 4 corresponding to 5 sections shown in Figure <a href="../fig8/">8</a> ((a) shows the results of case 3; (b) shows the results of case 4).</div>

International Journal of Chemical Engineering

fig13

Figure 13

Figure 13: Simulation of Multiphase Flow and Mixing in a Conveying Element of a Co-Rotating Twin-Screw Extruder by Using SPH 