Research Article
A Study of Success Rate of Miniscrew Implants as Temporary Anchorage Devices in Singapore
Table 2
Success rate of miniscrew implants at T1.
| | Success rate at T1 (%) | Number of 1st outcome successes/Total number | Unadjusted odds ratio (95% CI) | Unadjusted value | Adjusted odds ratio (95% CI) | Adjusted value |
| Overall success | 94.7 | 270/285 | | | | | Age at surgery | | | | 0.877 | | 0.251 | <20 years | 94.6 | 193/204 | 0.91 (0.28 to 2.95) | | 2.31 (0.55 to 9.62) | | ≥20 years | 95.1 | 77/81 | 1 | | 1 | | Gender | | | | 0.502 | | 0.288 | Female | 93.8 | 120/128 | 1 | | 2.01 (0.55 to 7.31) | | Male | 95.5 | 150/157 | 1.43 (0.50 to 4.05) | | 1 | | Sagittal skeletal malocclusion | | | | 0.421 | | | Class I | 92.6 | 87/94 | 1 | | | | Class II | 94.7 | 126/133 | 1.45 (0.43 to 4.82) | 1 | | | Class III | 100 | 36/36 | 6.26 (0.22 to 177.92) | 0.523 | | | Vertical skeletal malocclusion | | | | 0.918 | | 0.524 | High angle | 93.8 | 106/113 | 1 | | 1 | | Average | 95.1 | 97/102 | 1.28 (0.332 to 4.940) | 1 | 2.12 (0.55 to 8.18) | 0.276 | Low angle | 94.1 | 16/17 | 1.06 (0.09 to 12.50) | 1 | 2.38 (0.19 to 29.38) | 0.499 | Dental malocclusion | | | | 0.361 | | | Class I | 96.5 | 55/57 | 1 | | | | Class II Div. I | 93.4 | 155/166 | 0.61 (0.11 to 3.42) | 1 | | | Class III | 100 | 41/41 | 3.74 (0.09 to 164.50) | 0.554 | | | Class II Div. 2 | 87.5 | 7/8 | 0.23 (0.01 to 3.55) | 0.316 | | | Side of placement | | | | 0.928 | | | Left | 94.9 | 129/136 | 1.07 (0.34 to 3.41) | 1 | | | Midline | 100 | 4/4 | 0.56 (0.01 to 25.32) | 1 | | | Right | 94.5 | 137/145 | 1 | | | | Recipient jaw | | | | 0.290 | | 0.286 | Maxilla | 94.1 | 222/236 | 1 | | 1 | | Mandible | 98.0 | 48/49 | 3.03 (0.39 to 23.58) | | 3.40 (0.36 to 32.15) | | Site of placement | | | | 0.647 | | | Anterior region | 93.3 | 14/15 | 0.36 (0.03 to 4.96) | 1 | | | Posterior region | 93.4 | 169/181 | 0.50 (0.09 to 2.76) | 1 | | | Retromolar | 100 | 20/20 | 1.52 (0.03 to 70.74) | 1 | | | Palate | 97.1 | 67/69 | 1 | | | | Miniscrew implant type | | | | 0.606 | | 0.887 | AbsoAnchor | 92.6 | 25/27 | 1 | | 1 | | Vector TAS | 94.9 | 244/257 | 1.50 (0.32 to 7.04) | | 1.14 (0.19 to 6.85) | | Miniscrew length | | | | 0.001* | | 0.002* | 6-7 mm | 82.7 | 43/52 | 1 | | 1 | | 8 mm | 97.3 | 177/182 | 7.41 (2.01 to 27.38) | 0.001* | 11.88 (2.73 to 51.71) | 0.001* | 10–12 mm | 98.0 | 50/51 | 10.47 (0.94 to 116.31) | 0.058 | 10.50 (1.18 to 93.51) | 0.035 | Miniscrew diameter | | | | 0.601 | | | 1.3 mm | 92.9 | 26/28 | 0.30 (0.02 to 4.86) | 0.658 | | | 1.4 mm | 94.3 | 200/212 | 0.38 (0.04 to 4.02) | 0.714 | | | 2.0 mm | 97.8 | 44/45 | 1 | | | |
|
|
≤ 0.05.
|