Table of Contents Author Guidelines Submit a Manuscript
International Journal of Dentistry
Volume 2016 (2016), Article ID 9823025, 7 pages
http://dx.doi.org/10.1155/2016/9823025
Clinical Study

The Prosthetic Workflow in the Digital Era

1Department of Surgical and Morphological Science, University of Insubria, 21100 Varese, Italy
2Private Practice, Abbiategrasso, Milan, Italy
3Private Practice, 21100 Varese, Italy

Received 24 February 2016; Revised 28 June 2016; Accepted 26 September 2016

Academic Editor: Thomas Fortin

Copyright © 2016 Lidia Tordiglione et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Kugel, “Impression-taking: conventional methods remain steadfast as digital technology progresses,” Compendium of Continuing Education in Dentistry, vol. 35, no. 3, pp. 202–203, 2014. View at Google Scholar · View at Scopus
  2. M. Zimmermann, A. Mehl, W. H. Mörmann, and S. Reich, “Intraoral scanning systems—a current overview,” International Journal of Computerized Dentistry, vol. 18, no. 2, pp. 101–129, 2015. View at Google Scholar · View at Scopus
  3. K. Ueda, F. Beuer, M. Stimmelmayr, K. Erdelt, C. Keul, and J.-F. Güth, “Fit of 4-unit FDPs from CoCr and zirconia after conventional and digital impressions,” Clinical Oral Investigations, vol. 20, no. 2, pp. 283–289, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. T. Abdel-Azim, K. Rogers, E. Elathamna, A. Zandinejad, M. Metz, and D. Morton, “Comparison of the marginal fit of lithium disilicate crowns fabricated with CAD/CAM technology by using conventional impressions and two intraoral digital scanners,” Journal of Prosthetic Dentistry, vol. 114, no. 4, pp. 554–559, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. G. Pradíes, C. Zarauz, A. Valverde, A. Ferreiroa, and F. Martínez-Rus, “Clinical evaluation comparing the fit of all-ceramic crowns obtained from silicone and digital intraoral impressions based on wavefront sampling technology,” Journal of Dentistry, vol. 43, no. 2, pp. 201–208, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Ng, D. Ruse, and C. Wyatt, “A comparison of the marginal fit of crowns fabricated with digital and conventional methods,” Journal of Prosthetic Dentistry, vol. 112, no. 3, pp. 555–560, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. D. Ahrberg, H. C. Lauer, M. Ahrberg, and P. Weigl, “Evaluation of fit and efficiency of CAD/CAM fabricated all-ceramic restorations based on direct and indirect digitalization: a double-blinded, randomized clinical trial,” Clinical Oral Investigations, vol. 20, no. 2, pp. 291–300, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. S. B. M. Patzelt, C. Lamprinos, S. Stampf, and W. Att, “The time efficiency of intraoral scanners: an in vitro comparative study,” Journal of the American Dental Association, vol. 145, no. 6, pp. 542–551, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. T. Joda and U. Brägger, “Time-efficiency analysis comparing digital and conventional workflows for implant crowns: a prospective clinical crossover trial,” The International Journal of Oral & Maxillofacial Implants, vol. 30, no. 5, pp. 1047–1053, 2015. View at Publisher · View at Google Scholar
  10. H. Tamim, H. Skjerven, A. Ekfeldt, and H. J. Rønold, “Clinical evaluation of CAD/CAM metal-ceramic posterior crowns fabricated from intraoral digital impressions,” The International Journal of Prosthodontics, vol. 27, no. 4, pp. 331–337, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Ting-shu and S. Jian, “Intraoral digital impression technique: a review,” Journal of Prosthodontics, vol. 24, no. 4, pp. 313–321, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. E. Yuzbasioglu, H. Kurt, R. Turunc, and H. Bilir, “Comparison of digital and conventional impression techniques: evaluation of patients' perception, treatment comfort, effectiveness and clinical outcomes,” BMC Oral Health, vol. 14, no. 1, article 10, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. T. Joda and U. Brägger, “Patient-centered outcomes comparing digital and conventional implant impression procedures: a randomized crossover trial,” Clinical Oral Implants Research, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. E. Yuzbasioglu, H. Kurt, R. Turunc, and H. Bilir, “Comparison of digital and conventional impression techniques: evaluation of patients' perception, treatment comfort, effectiveness and clinical outcomes,” BMC Oral Health, vol. 14, article 10, 7 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. J. S. Almeida e Silva, K. Erdelt, D. Edelhoff et al., “Marginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional impression techniques,” Clinical Oral Investigations, vol. 18, no. 2, pp. 515–523, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Scotti, P. Cardelli, P. Baldissara, and C. Monaco, “Clinical fitting of CAD/CAM zirconia single crowns generated from digital intraoral impressions based on active wavefront sampling,” Journal of Dentistry, 2011. View at Publisher · View at Google Scholar
  17. A. Ender and A. Mehl, “In-vitro evaluation of the accuracy of conventional and digital methods of obtaining full-arch dental impressions,” Quintessence International, vol. 46, no. 1, pp. 9–17, 2015. View at Google Scholar
  18. P. Papaspyridakos, G. O. Gallucci, C.-J. Chen, S. Hanssen, I. Naert, and B. Vandenberghe, “Digital versus conventional implant impressions for edentulous patients: accuracy outcomes,” Clinical Oral Implants Research, vol. 27, no. 4, pp. 465–472, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. P. Seelbach, C. Brueckel, and B. Wöstmann, “Accuracy of digital and conventional impression techniques and workflow,” Clinical Oral Investigations, vol. 17, no. 7, pp. 1759–1764, 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. S. J. Lee and G. O. Gallucci, “Digital vs. conventional implant impressions: efficiency outcomes,” Clinical Oral Implants Research, vol. 24, no. 1, pp. 111–115, 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. A. S. K. Persson, A. Odén, M. Andersson, and G. Sandborgh-Englund, “Digitization of simulated clinical dental impressions: virtual three-dimensional analysis of exactness,” Dental Materials, vol. 25, no. 7, pp. 929–936, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. T. Miyazaki, Y. Hotta, J. Kunii, S. Kuriyama, and Y. Tamaki, “A review of dental CAD/CAM: current status and future perspectives from 20 years of experience,” Dental Materials Journal, vol. 28, no. 1, pp. 44–56, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. F. Zarone, S. Russo, and R. Sorrentino, “From porcelain-fused-to-metal to zirconia: clinical and experimental considerations,” Dental Materials, vol. 27, no. 1, pp. 83–96, 2011. View at Publisher · View at Google Scholar · View at Scopus
  24. L. M. Kane, D. Chronaios, M. Sierraalta, and F. M. George, “Marginal and internal adaptation of milled cobalt-chromium copings,” The Journal of Prosthetic Dentistry, vol. 114, no. 5, pp. 680–685, 2015. View at Publisher · View at Google Scholar · View at Scopus
  25. R. Sorrentino, G. De Simone, S. Tetè, S. Russo, and F. Zarone, “Five-year prospective clinical study of posterior three-unit zirconia-based fixed dental prostheses,” Clinical Oral Investigations, vol. 16, no. 3, pp. 977–985, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. V. V. Silva, F. S. Lameiras, and Z. I. P. Lobato, “Biological reactivity of zirconia-hydroxyapatite composites,” Journal of Biomedical Materials Research, vol. 63, no. 5, pp. 583–590, 2002. View at Publisher · View at Google Scholar · View at Scopus
  27. P. Christel, A. Meunier, M. Heller, J. P. Torre, and C. N. Peille, “Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia,” Journal of Biomedical Materials Research, vol. 23, no. 1, pp. 45–61, 1989. View at Publisher · View at Google Scholar · View at Scopus
  28. P. F. Manicone, P. Rossi Iommetti, and L. Raffaelli, “An overview of zirconia ceramics: basic properties and clinical applications,” Journal of Dentistry, vol. 35, no. 11, pp. 819–826, 2007. View at Publisher · View at Google Scholar · View at Scopus
  29. M. Ferrari, A. Vichi, and F. Zarone, “Zirconia abutments and restorations: from laboratory to clinical investigations,” Dental Materials, vol. 31, no. 3, pp. e63–e76, 2015. View at Publisher · View at Google Scholar · View at Scopus
  30. S. Quaas, H. Rudolph, and R. G. Luthardt, “Direct mechanical data acquisition of dental impressions for the manufacturing of CAD/CAM restorations,” Journal of Dentistry, vol. 35, no. 12, pp. 903–908, 2007. View at Publisher · View at Google Scholar · View at Scopus