Research Article
Comparison of Overall Fit of Milled and Laser-Sintered CAD/CAM Crown Copings
Table 3
Overall fit discrepancies of the DLMS group.
| Specimen name | Mean | Minimal value | Maximal value | Standard deviation | Standard error (μm) |
| DLMS1 | 42.27 | 36.93 | 47.49 | 2.862 | 0.04 | DLMS2 | 42.25 | 36.79 | 47.49 | 2.908 | 0.04 | DLMS3 | 42.12 | 36.48 | 47.40 | 3.019 | 0.04 | DLMS4 | 42.22 | 36.48 | 47.46 | 2.933 | 0.04 | DLMS5 | 42.36 | 36.81 | 47.85 | 3.026 | 0.04 | DLMS6 | 42.23 | 36.80 | 47.49 | 2.887 | 0.04 | DLMS7 | 42.17 | 37.35 | 47.12 | 2.834 | 0.04 | DLMS8 | 42.25 | 37.03 | 47.41 | 2.914 | 0.03 | DLMS9 | 42.40 | 36.71 | 47.89 | 3.040 | 0.04 | DLMS10 | 42.14 | 36.42 | 48.45 | 2.956 | 0.04 | Mean total | 42.24 | 36.78 | 47.50 | 2.94 | 0.04 |
|
|